Add a high-quality, multifunction PTZ camera to your conference room, event space, education environment, or house of worship with the white Universal HDMI/SDI/USB Live Streaming PTZ Camera with 20x Zoom from BZB Gear. The camera features a 1/2.8" CMOS sensor and outputs up to 1080p video over HDMI, SDI, USB 3.0, or uses RSMP/RTSP protocols to stream video and audio to the Internet.

The camera supports uncompressed video transmission over MJPEG, H.265, and H.264 compression formats. When connected to the Internet, this IP camera allows you to control PTZ actions and monitor the surveillance area from a remote location via a Web browser. This provides you with several advantages like reduced integration costs, easy remote production and engineering, and lower cost for multiple location systems. You can also manage the unit via IP using ONVIF or by using its RS-232 or RS-485 serial ports with a separately available serial PTZ controller, and the RS-232 serial ports support cascading. You can power the camera with the included power adapter, or you can utilize your existing PoE (Power-over-Ethernet) LAN to save cable runs.

Equipped with a 20x optical zoom, this PTZ camera enables you to zoom in on activity in the monitoring area for a closer look, and it has a wide field of view for capturing large meeting rooms. It features an RJ45 Ethernet output that can transmit up to 1080p video to any RTSP/RTMP streaming network so you can broadcast live directly to internet streaming sites. The camera also supports 3.5mm stereo audio input, allowing you to capture and embed AAC, MP3, or PCM audio with the video signal.

3 x SDI/HDMI PTZ Cameras, 20x Zoom    6-Channel Video Switcher/Mixer    8-Port 1G Ethernet PoE+ Switch    IP/Serial PTZ Controller with Joystick

Remote learning, lectures, webcasting, video conferencing, remote training, remote medicine, interrogation, and emergency command systems

Supports H.264/H.265 video compression with resolutions up to 1920x1080p60 and 2-channel AAC, MP3, and PCM audio compression

High-Quality 1/2.8" CMOS sensor captures resolutions up to 1920 x 1080p60

Autofocus algorithm ensures a smooth adjusting lens, accuracy, and stable auto-focusing

Low-noise CMOS ensures high SNR of camera video

Further reduce noise while ensuring image sharpness

An adaptive, high-accuracy, step-driving motor mechanism provides extremely quiet and smooth operation to designated positions

HDMI, 3G-SDI, wired LAN streaming output

Control using IR remote, IP via a web GUI, and RS232/RS485 serial

ONVIF, RTSP, RTMP protocols and RTMP push mode to a streaming media server (Wowza, FMS)

Supports low-power sleep/wake up; the consumption is lower than 500mW in sleep mode

VISCA, VISCA-over-IP, Pelco-D, and Pelco-P protocols are automatically recognizable

RS-232 cascade function for convenient installation of multiple units

Support for up to 255 presets and 10 presets by IR remote

3.5mm stereo line input supports 16, 32, 44.1, 48 kHz sampling frequency and AAC, MP3, PCM audio encoding

Power the camera using the included power adapter or utilize PoE (Power-over-Ethernet)

Related Questions and Answers

Q: 1. Can I control this camera from an off site remote location using the IP address? or does the controller need to be physically attached to the unit?

A: IP control allows you to control the camera from any location where you can be connected to the same network.

Q: 2. Will this controller work with the Birddog X1?

A: The BZBGEAR Universal Compact Serial and IP PTZ Camera Joystick Controller can control the BirdDog X1 PTZ Camera via Serial RS-232 or RS-485.

Q: 3. Can a button be programmed to both change the input source (i.e. camera) and issue a preset with one press?

A: The PTZCam Switch N8 8-Channel NDI Switcher and PTZ Controller (B&H# PTZCSWITCHN8) can have a button programmed by using a preset to both switch to a certain source and switch to a certain color temperature for that source.

Q: 4. it's possible to have the tally function through the ndi cable when using panasonic or sony ptz ?

A: Yes, it is possible to use the PTZCam Switch N8 8-Channel NDI|HX2|HX3 Switcher to control Tally and the camera though NDI. However, this depends on the camera model. The camera must have NDI HX3, or NDI HX3 support. Many older cameras only support NDI HX ( NDI HX1)

Q: 5. Is this compatible with NDI'HX2 and/or NDI'HX3 cameras?

A: At this moment the PTZCam Switch N8 8-Channel NDI Switcher and PTZ Controller supports only NDI/HX2 cameras.

Q: 6. Is this camera outdoor rated?

A: Unfortunately, no. It would be best to use a universal cover like this one: PortaBrace Universal Waterproof Rain Slick Cover for PTZ Cameras https://www.bhphotovideo.com/c/product/1348634-REG/porta_brace_qrs_ptz_a_universal_water_proof.html

Q: 7. Is it possible to have the tally function directly through the ndi connection when using Sony or Panasoni PTZ camera ?

A: The PTZCam Switch N8 8-Channel NDI|HX2|HX3 Switcher and PTZ Controller can output tally signals via NDI, but the cameras must support NDI HX2 or NDI HX3 to be compatible.

Q: 8. What Poe Switch is Recommended to power 2 of these camera?

A: Here are two possibilities. Netgear GS108-400NAS ProSAFE 8-Port Gigabit Switch BH #NEGS108400NS • MFR #GS108-400NAS(---- Please copy and paste either number into a B&H search box) Cisco SG110D 110 Series 8-Port Unmanaged Network Switch BH #CISG110D08 • MFR #SG110D-08-NA(---- Please copy and paste either number into a B&H search box)

Q: 9. Do these cameras have tally lights? If so, how do they connect?

A: No, the cameras in the BZBGear 3 x 30x PTZ Camera Broadcast Kit with 6-Channel Mixer, 8-Port Switch & Controller (White) do not have tally lights. You could get the Cerevo FlexTally Wireless Tally Lamp System to add Tally lights to each camera. See: https://www.bhphotovideo.com/c/product/1475719-REG/cerevo_cdp_ft01b_flextally_wireless_tally_system.html

Q: 10. Is it compatible with Canon CR-N300 ?

A: Yes, PTZcam has tested other NDI HX2 cameras like the Canon CR-N300 with the PTZCam Switch N8 8-Channel NDI Switcher and PTZ Controller, and they work perfectly with the switcher.