Lighting designers and event producers looking for a high-quality par fixture that's capable of withstanding the elements will be impressed with the American DJ Encore LP12IP, a heavy duty, IP65 outdoor-rated LED par with a 10° beam angle, well suited for professional indoor and outdoor events. The instrument features twelve 20W quad (4-in-1 RGBL) LEDs with 64 built-in color macros and includes five dimming curves plus smooth 0 to 100% electronic dimming.

There are five operational modes including Static Color Mode, RGBL Dimmer Mode, Program Mode, Sound Active Mode, and DMX Controlled, which offers 6 DMX channel modes. The 4-button LED display menu allows for easy navigation and programming. The instrument includes 5-pin DMX inputs and outputs, as well as a powerCON input and pass-through. The dual-scissor yoke bracket allows fixtures to be hung or set on the ground. The Encore LP12IP ships with a powerCON power cable, a 25° frost filter, and a safety cable.

Twelve 20W Quad RGBL LEDs    Electronic Dimming: 0-100%    Beam Angle: 10°    5 Operational Modes    6 DMX Channel Modes    64 Built-In Color Macros    Electronic Strobe    Color-Temperature Control with Presets    Scissor Yoke, 25° Frost Filter    Includes Power Cord and Safety Cable

• Linear color temperature control (2700 to 6500K)
• Preset color temperatures (2700, 3200, 4000, 5600, and 6500K)
• 16-bit fine color control (red, green, blue, and lime)
• 64 built-in color macros
• 4-button, DMX digital display on rear panel
• 5 Operational Modes: Static Color mode, RGBL Dimmer mode, Program mode, Sound Active mode, and DMX Controlled
• Supports RDM (Remote Device Management)
• With wired digital communication network
• 6 selectable dimming modes (Standard, Stage, TV, Architectural, Theatre, and Stage 2)
• 4 selectable dim curves (Linear, Square, Inv. Square, S-Curve)
• Adjustable refresh rate (14 presets from 900 to 25,000 Hz)
• Flicker free operation (no flickering on camera)
• LED pulse and strobe effect
• Electronic Dimming: 0 - 100%
• 6 DMX Modes: 4, 7, 8, 10, 13, and 16-channel 
• Quiet fan mode
• IP65 Rated: Ingress protection against liquid, snow, dust, and sand
• All-metal construction
• IP-rated rubber covers protect in/out locking power connectors and IP-rated 5-pin sockets
• Locking, outdoor in/out power connectors
• Data linkable via 5-pin XLR DMX connections
• Scissor yoke and safety eye

Related Questions and Answers

Q: 1. Is this similar to the Matthew magic finger?

A: This is designed to have similar function.

Q: 2. What is the range of pipe diameters that this clamp will fit?

A: This clamp fits truss piping from 1" to 2.5" in diameter.

Q: 3. What is the range of pipe diameters that this clamp can be used with?

A: This fits truss piping from 1" to 2.5" in diameter.

Q: 4. Does anyone know the ball diameter?

A: It's about 1 or 1 1/8 . I took a photo along with a ruler but this site doesn't allow more advanced answers.

Q: 5. can you use this mount in a horizontal instead of vertical orientation?

A: These clamps are designed to support the load in a vertical orientation.

Q: 6. Does this clamp work with the Chauvet DJ EVE TF-20 light?

A: Yes, this clamp is compatible with the Chauvet DJ EVE TF-20.

Q: 7. How long is the power cord?

A: Three feet

Q: 8. What's the treading on the bolt?

A: From the manufacturer: Specs for the CLP-05 Clamp that includes thread sizing and pitch for the M12 Bolt. • Bolt Dimension: 22.5 mm • Threaded Bolt: M12 • Threaded Bolt Pitch: 1.75

Q: 9. What is the diameter of the stud? 5/8"?

A: This clamp would not have a 5/8" stud. This is made to fit a yoke attachment directly. A C-clamp to consider with a 5/8" stud is the ikan Stage Clamp with Baby (16mm) Stud, B&H # IKKCP703. https://bhpho.to/30HjTBh

Q: 10. Can this be used on an angled ceiling without a shim to level it?

A: This item is designed to be used on a flat surface.