Enjoy dynamic audio and clear, easily understood dialogue by adding the gloss black HTM71 S3 3-Way Center Channel Speaker from Bowers & Wilkins to your TV. Whether you're upgrading your TV's audio or building a new 700 Series surround sound system, you will enjoy high-fidelity audio from the HTM71 S3's single 1" decoupled carbon dome tweeter, 5" Continuum cone FST midrange driver, and dual 5" Aerofoil Profile woofers.

1 x 1" Decoupled Carbon Dome Tweeter    1 x 5" Continuum Cone FST Midrange    2 x 5" Aerofoil Profile Woofers    50 Hz to 28 kHz Frequency Response    Supports 30 to 200W of Power    Dual Connections for Bi-Wiring

The 1" decoupled carbon dome tweeter is featured in a tweeter-on-top design, housed in a frame that's been milled from a single block of aluminum for better resistance to resonance. With the HTM71 S3, the tweeter now utilizes a carbon dome, which raises the breakup threshold to 47 kHz, further improving the accuracy of higher frequencies.

The 6" midrange driver incorporates a composite construction that does not hinder the speaker's performance. Four Bowers & Wilkins technologies are employed to ensure clean and neutral vocals and instrument representation, without interference from the woofers. The four technologies used are a Continuum cone, FST, biomimetic suspension, and midrange decoupling.

• Supports up to 200W of amplified power
• Dual connections support bi-wired setup
• Variable thickness woofers for improved rigidity
• Flowport

Related Questions and Answers

Q: 1. What is the maximum reach of the boom? Maximum recommended mic weight? Can you add your own XLR cable to the boom internally?

A: Hi, Yes, you can add your own cable, maximum weight 2.1 lbs and the maximum reach is approximately 36 inches. Thank you for shopping at B&H!

Q: 2. Could this mic arm works with the MXL BCD-1?

A: This studio boom arm would be compatible with the MXR BCD-1 Broadcast Dynamic Microphone.

Q: 3. What is the country of manufacture?

A: It is made in China.

Q: 4. Can they be used for a sound bar back speakers?

A: Only if there is a way to hook them up to the soundbar. These are designed to be used as a front L/R stereo pair. Seems like overkill for rear speakers with a soundbar.

Q: 5. Does this system works in dual voltage range of 110-220 volts?

A: Yes the B&O Formation Bar is 100 to 240 VAC, 50 / 60 Hz compatible.

Q: 6. Is it compatible with Sony XBR-49X830C?

A: No. It will connect with this SONY TV. To pair the SONY TV XBR-49X830C 49" Class 4K Smart LED TV with a Bluetooth device Only for Bluetooth A2DP-supported models that can use Bluetooth audio devices such as headphones or speakers. Bluetooth A2DP-supported models that can use Bluetooth audio devices

Q: 7. Can this be used just as a center speaker?

A: The Bowers & Wilkins Panorama 3 400W 3.1.2-Channel Soundbar cannot be used as only a center-channel speaker, as it is made to take full audio from the audio output of the TV.

Q: 8. I have a Yamaha R-V1105 Receiver purchased a few years back, and need a center speaker Do you recommend the Yamaha NS-P150PN?\

A: That would be fine. If you really only need a center speaker, this would do the job nicely: https://a href= http://www.bhphotovideo.com/c/product/1040016-REG/yamaha_ns_c210bl_ns_c210_two_way_center_channel.html target= _blank www.bhphotovideo.com/c/product/1040016-REG/yamaha_ns_c210bl_ns_c210_two_way_center_channel.html/a

Q: 9. Is it taller than it is deep or deeper than it is tall? Cab't tell by description and images

A: Resting on a long side with the speakers facing out, it is 17 wide, 7 deep (7 3/4 including the grille), and 5 3/4 high...and the sound is great.

Q: 10. I have the B&W wedge, how does this compare?

A: The Wedge is a slightly higher end speaker with a newer version of bluetooth, slightly smaller profile, it produces some lower bass frequencies that the Zeppelin does not and the Wedge has a slightly larger driver as well.