The Tilta 6.6 x 6.6" Carbon Fiber Matte Box is a 15-piece matte box kit designed for studio camera setups. Constructed from carbon fiber and aluminum, the matte box is designed to be strong and lightweight and features a 19mm swing-away rod mount for quick lens changes between shots. It provides three rotating filter stages that accommodate 6.6 x 6.6" filters, with the trays height adjustable for optical center alignment. It also provides a removable top handle with 1/4"-20 and 3/8"-16 threads for attaching various accessories. Included with the matte box are carbon fiber top and side flags to help prevent unwanted light from hitting your lens. The rear opening diameter of the mate box supports lens up to 165mm, with a set of adapter rings to reduce the rear opening as low as 80mm. A set of five matte inserts is also included.

Fits Lenses up to 165mm O.D.    Swing-Away 19mm Rod Mount    3 Rotating Filter Stages    Trays Support 6.6 x 6.6" Filters    Adjustable Height Filter Slots    Top and Side Flags    Six Adapter Rings    Five Matte Inserts    Carbon Fiber & Aluminum Construction

• 19mm rod adapter to easily mount to industry-standard 19mm camera support systems

• Swing away design allows you to move the matte box away when not in use and allows for easy lens replacement

• Three rotating aluminum filter holders accept 6.6 x 6.6" filter

• Carbon fiber top and side flags

• Removable top handle with 1/4"-20 and 3/8"-16 accessory threads

• 80, 95, 114, 134mm, and 147mm lens adapters for use with a wide range of lenses

• 100mm rubber insert

• Five matte inserts to accommodate various focal lengths from wide angle to telephoto

Related Questions and Answers

Q: 1. Does this matte box work with extending zoom lenses, like the Canon L-series zooms?

A: That depends on how you use the lens, but the Tilta 4 x 4" Carbon Fiber Matte Box, or really any matte box that doesn't attach by clamping onto the front of the lens, may have issues due to the extension/retraction of the lens when zooming.

Q: 2. Just got this. Adapter for 114mm comes with it?

A: Yes it comes with an adapter for 114mm.

Q: 3. Can the MB-T03 use 100x100x2mm filters or strictly the 4"x4"x4mm filters?

A: Yes, this will work with 100 x 100mm filters as well.

Q: 4. Can you add a Bottom flag to this?

A: no this will not support a bottom flag

Q: 5. the lightweight version accepts 4mm filters so shouldnt this one accept 4mm filters?

A: Yes, this will accept 4 x 4" Filters that are 4mm thick.

Q: 6. So I just received my tilta matte box and when I put it on my 15mm Rod system (red dragon) unfortunately it sits not straight. First of all it is too high even though I adjusted it to the very bottom. Also, it sits more to the left if you are facing the matte box. What is the solution ? Should I buy 19mm rod adapter ? Thank you very much ?

A: I had a similar problem when I got mine. The matte box should come with a 19mm bracket that you can switch out for the 15mm. Once I did that and got a dovetail and bridge plate from wooden camera and it seemed to work fine. I was a little annoyed at this when I first got it as well but there are solutions for it...means you have to spend a little more money but I wanted a brigeplt and dovetail anyway. Let me know if there is anything else you come across. I hope that made sense.

Q: 7. Does the B&H version of this matte box come with the 5 front sun shades pictured in some of the ebay listings?

A: Yes!

Q: 8. I just want to make sure this will work with a 134mm lens. The Zeiss 50mm makro is 134mm and that is what I want it to work with. Will it?

A: The MB-T03 will not accommodate the Zeiss Compact Prime CP.2 50mm/T2.1 Makro-Planar T, however our MB-T04 will work.

Q: 9. What does the matte box weigh? I see the listed weight is two pounds. Is this correct? Thanks

A: Yes, The Tilta 4 x 4" Carbon Fiber Matte Box weight is 2lbs.

Q: 10. 2 stage r 3 stage matte box

A: The Tilta 4 x 5.65 Carbon Fiber Matte Box B&H # TIMBT04 is a two stage matte box.