4 Pin Wireless Backup Camera

Teradek Usb To 5-pin Wireless Camera Control Hub For Smart 7 Monitors

Product Code: ga102818
Availability: In Stock

$447.00 $563.22

Qty

11 reviews Write a review

Description
Reviews (11)

Add wireless camera control to your SmallHD Smart 7 monitor via a Bolt 4K receiver with this USB to 5-Pin Wireless Camera Control Hub from Teradek. The adapter is part of the Wireless Camera Control Kit for the Teradek Bolt 4K series, designed to facilitate wireless camera control when you have the Smart 7 optional SmallHD camera control software license installed for your camera.

The unit plugs into the USB port on the bottom of the SmallHD monitor, and it provides two 5-pin connectors to facilitate the wireless connection to the Bolt 4K receiver.

Control Camera via Smart 7 Monitor Wireless Control with Bolt 4K USB to Dual 5-Pin Connectors

General
Compatibility	SmallHD Smart 7 Monitor Teradek Bolt 4K Series TX/RX
Inputs / Outputs
Connector 1	1x Micro-USB Type-B Male
Connector 2	2x 5-Pin Female
Packaging Info
Package Weight	0.115 lb
Box Dimensions (LxWxH)	5.7 x 5.2 x 1.4"

Related Questions and Answers

Q: 1. Do I have to power the SmallHD 702 Monitor and Trade Transmitter Separately or does it pass through power?

A: The Teradek Bolt 6 Monitor Module would share power and video with the connected display, allowing you to reduce cables required on set.

Q: 2. Does this work with the old 702 monitor, not the 702 touch?

A: No, the SmallHD Sun Hood for Smart 7 Series Monitors is not compatible with the older SmallHD monitors like the SmallHD 702 Lite 7" SDI and HDMI On-Camera Monitor and the SmallHD 702 OLED 7" On-Camera Monitor.

Q: 3. This mount appears to be tilt only - has anyone found a neat product solution that can attach so I can pan my Cine 5 as well?

A: If you look at the provided link, you will see a list of excellent choices of monitor swivels that can accommodate both horizontal and vertical motions: https://bhpho.to/3YFq6gO.

Q: 4. So SDI to HDMI out to HDMI in, that must add some latency. How much?

A: The latency during conversion is low, by about 1ms on Teradek Bolt 6 Monitor Module 750 TX for Smart 7 Series Monitors.

Q: 5. How long is the usb cable with the hub?

A: The included cable would be 3" long

Q: 6. Will this work for the 702 Touch? Or does it only work for 500 series?

A: The Wooden Camera Monitor Hinge for SmallHD Smart 5 Monitors (3/8"-16) is designed for the SmallHD Smart 5 monitor, such as the Cine 5, Indie 5, or Ultra 5 models specifically.

Q: 7. SmallHD says this isn't compatible with Cine 7 monitors purchased after Nov 2020. Is this correct? Wet changed in the Cine 7 that would make it incompatible? Thanks :)

A: This SmallHD Sun Hood for Smart 7 Series Monitors , is Not compatible with CINE 7 or 702 Touch purchased after November 1st 2020.

Q: 8. How is this different than the monitor hinge they’ve had out for a while that looks like this?

A: The new Wooden Camera Monitor Hinge for SmallHD Smart 5 Monitors was specifically designed to align perfectly with the pinholes with any of the SmallHD Smart 5 Monitors.

Q: 9. Will this work with the CINE 5?

A: Yes, This SmallHD Lemo cable would work with the SmallHD CINE 5 Touchscreen On-Camera Monitor.

Q: 10. does it work on 702?

A: Yes. The following unit is designed and made for Indie 7, Cine 7, or 702.

Jeffrey W.	28/08/2024
I use this to multiply my musb port on my laptop and couldn't get along without it. 5

Arthur	13/08/2024
This thing is the cats meow. I thought it was a little pricey but after using it for a month or so, I don't know how I ever got along without it. Each port has it's own on/off switch so instead of plugging and unplugging USB connectors, you simply press the switch. It's also powered with plenty of oomph. The one minor downside is the power brick which takes up another plug and space, but that's a minor inconvenience. Hopefully this product will last a long time. 5

Blair	11/08/2024
Definitely helps with multiple components to connect. 5

Robert	03/08/2024
Plenty of power for the desktop and portable drives. Like the ability to turn on a desktop drive and edit when needed. The seven slots for the drives are perfect along with the three charging slots for USB. Works very nicely with the Desktop Macintosh Computer. 5

Soma	07/07/2024
This is a great USB hub with a power indicator that tells you which USB you are using. It is a replacement for another brand that had its light failing all the time 5

Darin	23/06/2024
Works as intended, however, the supplied USB cable was too short to reach from my desktop computer to where the hub would ultimately live. 5

Steve	17/06/2024
works great, fast would buy again PrnnJersey Photo 5

Stephen	04/06/2024
After so many years of fumbling with USB ports, always at least one too few, and poor results from unpowered hubs, it's been great having this plugged into my PC. Now I can keep two or three backup drives plugged in at all times, plus a couple of dongles, and still have not used all the ports. I really like the switches. I turn one of my drives on and off as needed rather than having to plug and unplug. Works great. 5

Jeff	24/05/2024
Does just what I was looking for. But be careful, no need to light all the connections all the time. Need to upgrade to a jacked i9 machine. Is there a power only version for the opposite side of the desk? 5

Eric	01/05/2024
This is my third Sabrent hub. As with my previous units, this works great. My only minor wish is that it also came with a cable to plug into either Thunderbolt type port in addition to the normal USB3 port. 5