Doorbell Camera With Door Lock Control

Hikvision Ds-k2m061 Secure Door Control Unit

Product Code: ga102963
Availability: In Stock

$230.85 $343.97

Qty

1 reviews Write a review

Description
Reviews (1)

The Hikvision DS-K2M061 Secure Door Control Unit is the interlayer between the access control terminal and lock, including the door magnetic, the lock, the exit button, and so on. It can be applied to keep the door closed when the door is damaged.

Supports RS-485 Communication Wiegand Interface Supports Tampering Alarm Fire Interface & Exit Button Linkage

General
Compatibility	Select Access Control Devices
Interfaces	1 x Lock Control 1 x Exit Button 1 x Door Contact Input 2 x Alarm Input 1 x Alarm Output 1 x RS-485 1 x Wiegand
Power
Power Source	AC Input
DC Input Power	12 VDC
Environmental
Operating Temperature	-40 to 158°F / -40 to 70°C
Operating Humidity	0 to 90%
Physical
Mounting	1x Wall
Color	Black
Dimensions	4.5 x 1.9 x 1" / 115 x 48 x 26 mm
Weight	Not Specified by Manufacturer

Related Questions and Answers

Q: 1. What you're saying is you have to have a separate control panel for the lock? Like lets say a door knob?

A: This magnetic lock is designed to be connected to an access control system to allow entry/exit from a door. It is typically used in businesses with either a key card swipe access or someone (eg: receptionist) can release the door to let in visitors.

Q: 2. Does Leica SF C1 work with Nissin MG 10?

A: Yes, they work together.

Q: 3. How many universes does apollo have?

A: Each Apollo Bridge has one universe.

Q: 4. Is this compatible with Hikvision DS-7604NI-E1/4P 4-Channel NVR? Is so, does this connect to it via WIFI?

A: Yes, the Hikvision DS-HD2 Wi-Fi Video Doorbell could be connected to your Hikvision DS-7604NI-E1 NVR over your local WIFI network.

Q: 5. Can I use two iPads to control two diff. scenes from one Apollo Bridge?

A: No, the Litepanels Apollo Bridge Wireless Control Unit can work with one ipad at a time. It can not work with two at the same time.

Q: 6. can this be used as a ccu through a telecast copperhead system?

A: I have been unable to find out from Panasonic or the cable manufacturer if this combination will work as you wish. I will have to recommend that you contact a video engineer with expertise in this equipment.

Q: 7. will this trigger work on an M10 and trigger Godox flashes/strobes and allow for HSS?

A: No

Q: 8. Will this work with the Nissin i60?

A: The SF C1 will pair and trigger the generic Nissin i60 by itself. However once attached to any Leica camera pressing the camera shutter the generic Nissin i60 will NOT fire. It will only work with the Leica branded SF60 flash only. It would seem there is a proprietary lock in SFC1. Now if you were to take the canikon or sony version of this commander (air 10S) it would sync and fire across all versions of the i60 flashes except Leica.

Q: 9. Can lock be controlled via smartphone?

A: As long as the access control system that this is connected to is connected to the internet you can control via the smartphone.

Q: 10. Does this work with Nikon SB-5000?

A: They are not compatible.

Loree	23/06/2024
This is by far the best invention since the tripod and gimbal head. There are many spots where you can observe wildlife from your car. However your shoulders and elbows get strained holding the camera, and bean bags just don't do the trick. I put the gimbal head on the Eagle support and it becomes a very stable platform for shooting.. I have even used the wireless remote shutter release and just sat and fired away. This is a product that should be advertised. Though I do not have physical limitations, there are photographers who are restricted to their vehicles. This could be very helpful. Leveling the platform can be a bit tricky in the beginning, but after a couple of uses, you quickly get the hang of it. 5