Add another battery into your Wave High-Speed Camera's rotation with this Replacement Lithium-Ion Battery from FREEFLY. Whether its replacing the camera's internal battery or having an extra on hand, this rechargeable 2200mAh battery ensures you can keep recording dynamic footage. It recharges in just 1.5 hours via the camera's DC input.

For Wave High-Speed Camera    Replacement or Extra Battery    Rechargeable Lithium-Ion    2200mAh Capacity

Related Questions and Answers

Q: 1. Will this system work with the Photoflex FlexFlash 200 w/s strobes?

A: Yes works. Great

Q: 2. Is it powerfull enough to trigger 2 elinchrom x 400w simultaneously?

A: Yes, this product can power (2) Elinchrom monolights at 400 watt/sec each.

Q: 3. What kind of memory should I expect to have owning this camera, along with other equipment or accessories if needed ?

A: The FREEFLY Wave High-Speed Camera (2TB) comes equipped with 2TB of SSD flash storage. The camera comes with an internal battery that can last 60 minutes when recording and 90 minutes on standby, but an external battery should be considered for longer operation. Besides the battery, an external monitor, lenses, and camera support such as a tripod should also be considered.

Q: 4. Will this power 2 Elinchrom D LiteRX 400W simultaneusly? Thank you.

A: Yes, the Photogenic ION Lithium-ion Pure Sine Wave Inverter System with Spare Battery and Case will power two (2) Elinchrom D-Lite 400W/s RX 4 Flash Heads.

Q: 5. do these work with Broncolor Siros 800s ?

A: This is not capable of keeping up with the Siros 800s recycle speed.

Q: 6. Hi. How does it connect to each light? Are there a series of cords available that plug into the battery and the lights? Thank you.

A: Plug the cord that comes with light in. It is a standard grounded plug. Buy a spare battery incase you have a very long assignment. I have never had the battery run out of power. I use photogenic lights too. Great well built products

Q: 7. Is this compatible with profoto D2? I have a Vagabond mini which is not compatible. I know the recycle times will be slower but will it work at a slower rate?

A: There is a good chance that it will work, the specs are better then Vagabond Volt/Amp-hour: 14.8V / 8.8Ah Watt-hours (energy): 130 Current: 30ADC Peak / 15ADC average

Q: 8. Will this work on Profoto 600R flash kit?

A: I plugged 2 1000w Photogenics into it at one time and it powered them, need to have the modeling lights off.

Q: 9. Will this system power more than 2 strobes with a powerstrip? Like 4 Elinchrom BRX 250s?

A: This battery inverter is capable of handling up to two monolights at 500 watt/sec total.

Q: 10. Will this power 2 Elinchrom brx1 simultaneously? Also, can it be used intermittently with Genaray Spectro 14 LED for product shoots? Thank you.

A: This inverter can power two Elinchrom BRX series monolights simultaneously for location work. However, there are no tests that we are aware of that confirm the inverter's compatibility with continuous lights such as the Genaray Spectro 14 LED.