This two-rack unit high 19" Rack Drawer with Built-In Combination Lock from Adam Hall is made from steel with a black powder coat finish for strength and durability. It features full-extension drawer slides, and a built-in combination lock.

Full Extension Drawer Slides

• Full extension
• Drawer on ball-bearing slide-in rail
• Combination lock
• Removable by quick disconnection of the slide-in rails

Related Questions and Answers

Q: 1. The Height of 27.6 with or without the wheels?

A: 27.6 is the overall height including the caster wheel kit.

Q: 2. what thread size are the screws?

A: This uses standard 10-32 rack screws. Like this: https://www.bhphotovideo.com/c/product/232389-REG/Middle_Atlantic_HPS_HPS_10_32_3_4_Philips.html

Q: 3. Is this the same rack that the Isovox in mounted to in the store?

A: Yes, this is that rack that is displayed in the store.

Q: 4. Can all side panels be removed?

A: The Auray ERS-16U comes with all of the individual parts and requires assembly. There are four corner columns and two vented side panels, as well as the top plate and bottom plate which includes four casters. Although the two side panels are separate pieces, the instructions show that two corner columns need to be attached to each side panel first before the bottom and top plates can be attached. Each side panel is needed in order to secure the top and bottom plates, and to prevent the corner columns from wobbling. Without the side panels the rack may not have the capacity to safely support the weight of any gear. Here is a link to the instructions so you can see how the rack is put together: http://www.bhphotovideo.com/lit_files/654187.pdf

Q: 5. Is the foam deep enough to hold a beltpack if placed towards to bottom along with a handheld ontop so i can have 4 of each wireless transmitters stored in the drawer?

A: The foam cut out depth is less than 2 inches, so that should work depending on the thickness of the belt pack transmitter/receiver.

Q: 6. will this handle three 100 lb amps and a couple other audio devices?

A: Yes. The Auray ERS-22U Steel Equipment Rack has a load capacity of 440 lbs.

Q: 7. Does this come assembled?

A: No, the Auray ERS-12U Steel Equipment Rack with 3" Casters (12 RU) does not come assembled. This equipment rack includes assembly hardware with purchase. Here is a link to the assembly instructions for context into what is required to assemble this item: https://bhpho.to/3rpPF45

Q: 8. Can you use this rack without the wheels and place it on top of a table?

A: No, the wheels are permanently attached to the base plate. We do have other 12 RU racks available in stock without wheels that are in the same price range such as the Middle Atlantic RK12 RK Series Rack (B&H # MIRK12) which is constructed with black laminate MDF, the Odyssey Innovative Designs CRS12 Carpeted Studio Rack (B&H # ODCRS12) has a carpeted exterior, and the Gator Cases GR-STUDIO12U 12 RU Studio Rack Cabinet (B&H # GAGRS12) is made of laminated MDF.

Q: 9. What is the maximum seating depth of the gear to be installed?

A: The maximum internal depth for mounting gear inside the rack is 18".

Q: 10. What screw size should I use to mount the equipment in the rack?

A: Auray ERS-12U Steel Equipment Rack uses 10-32 size screws like the Middle Atlantic HPS 10-32 3/4" Philips Truss-Head Screws & Washers 25 Pieces - Black (B&H # MIHPS).