With built-in ergonomic shoulder pad, 10" sliding track, extra space for accessories in front, VCT14-compatible V-wedge, red buttons and levers all around, and much more, this is the stylish VCT Pro Baseplate from Zacuto. Use it with all types of cameras, from DSLRs to larger models, like the Alexa.

A section of the baseplate extends out beyond the 15mm LWS rod adapter in front. With the rod adapter thus set back, you have additional space to mount accessories under the camera lens, allowing you to position the camera further back on the plate, keeping the balance point of your rig directly over your shoulder. (The rod adapter is vertically adjustable 1", and has to be in a raised position to allow for accessories to be mounted in the additional space. Also, a 1.8" riser for the rod adapter is optionally available for RED cameras by special order from Zacuto.) Also, on the bottom of the section that protrudes out is where the V-wedge is. There is also a 15mm LWS rod adapter on the rear.

The VCT Pro Baseplate features a 10" sliding track, providing the space to optimally adjust balance after every lens change. Moreover, the included red camera plate can be loosened by a spring-loaded lever instead of a screw, so you can make adjustments quickly and easily. To fully release and remove the plate (and camera), just press a red button on the side of the baseplate and slide the plate out. The rod ports also have spring-loaded levers.

An ARRI M6 rosette is available on the front for attaching accessories and grips, and there are also three 1/4"-20 threaded holes on the side providing additional mounting options. 1/4"-20 and 3/8"-16 tripod mount holes are available on the bottom to use instead of the V-wedge. The shoulder pad runs pretty much along the entire length as well as width of the baseplate, and is made of gel polymer. Two 6.5" 15mm rods are included. One 1/4"-20 and one 3/8"-16 screw are supplied for the camera plate. The VCT Pro Baseplate is made in the USA.

VCT Pro Baseplate with 15mm LWS Adapter    VCT -14 Tripod Plate    10" Sliding Track, ARRI Rosette, V-Wedge    Large Ergonomic Gel Polymer Shoulder Pad

• Front rod adapter is set far back, providing more space for accessories, and allowing the camera to be positioned further back for better balance
• 10" sliding track (with spring-loaded lever) for balance adjustment after lens changes
• VCT14-compatible V-wedge
• 1/4"-20 and 3/8"-16 tripod mount holes
• Ergonomic gel polymer shoulder pad
• 15mm LWS rod adapter on the rear
• Front rod adapter is vertically adjustable 1"; optional 1.8" riser available from Zacuto for RED cameras
• ARRI M6 rosette
• Three 1/4"-20 threaded holes for accessories
• Includes two 6.5" 15mm rods
• 1/4"-20 and 3/8"-16 screws supplied
• Made in the USA

Related Questions and Answers

Q: 1. Does the bottom of this rig have the VCT mount?

A: Yes, the Zacuto ACT Baseplate offers the availability to add a ACT mounting plate to your tripod to be able to quickly lock down your shoulder rig or roll cage. Please review the following item Zacuto ACT Mounting Plate BH #ZAZAMP • MFR #Z-AMP https://bhpho.to/3BxD1Fa

Q: 2. Does this baseplate support 19mm rods? Or does anyone know if it has an attachment that can support 19mm rods?

A: This baseplate does not support 19 mm rods, but there is an adapter from Zacuto called a Z-J-1 Jeep Rod Adapter: https://a href= http://www.bhphotovideo.com/c/product/587577-REG/Zacuto_Z_J_1_Z_J_1_JEEP_Rod_Adapter.html target= _blank www.bhphotovideo.com/c/product/587577-REG/Zacuto_Z_J_1_Z_J_1_JEEP_Rod_Adapter.html/aBasically you would need 15mm rods that attach to the front of this baseplate, and the Jeep adapter would fit onto those 15mm rods and would give you the ability to attach 19mm rods at the proper spacing. I have used adapters similar to this and was surprised at how stiff and strong they were.

Q: 3. Is this compatible with any of the SHAPE VCT plates?

A: This product is a VCT Adapter Plate. It works with systems with VCT connection under it, such as the SHAPE REVOLT VCT Universal Baseplate, B&H # SHBP10. https://bhpho.to/2S3gk6k

Q: 4. Does it work on Black magic Ursa (big one,7.5 kg),dr asok

A: Yes it does fit the BMD 4.6K Pro (the big one), however I think it would be cheaper to buy the BMD shoulder rig etc and then you just need a Zacuto VCT tripod plate. The bottom connection of these shoulder rigs is an industry standard just like the rod spacing and position, so the VCT tripod plate will snap onto the bottom of the BMD shoulder rig. I leave the VCT baseplate connected to my tripod and then snap on a Canon C200 (with the Zacuto VCT shoulder rig) or a BMD 4.6K Pro with the BMD shoulder rig.

Q: 5. Would this fit a FS5 or Fx6?

A: 100% Yes. one of the best VCT plates in the game meant for any serious working rig in production.

Q: 6. Will this work with Manfrotto tripod?

A: Yes, the SmallRig VCT-14 Quick Release Tripod Plate can be mounted to Manfrotto tripods.

Q: 7. How long of a M6 Screw do I need for the rosette? Looking to attach the FS7 arm, but need a new screw.

A: From what you are saying, our suggestion is that you get this. Zacuto Zgrip Trigger for Sony FS7M2 B&H # ZAZZG72T.

Q: 8. Is the small red sliding camera mounting plate compatible with arca type clamps such as the Kessler kwik?

A: The sliding camera plate is not arca type. However Zacuto offers the VCT Pro Tripod Doc, B&H # ZAZVCTPD, for this exact purpose. https://bhpho.to/2F3poO0

Q: 9. Is this VCT plate compatible with the Arri Shoulder Mount / VCT-14 Style Plate for Canon C500mk2 ?

A: Yes, there should be no issues with that pairing.

Q: 10. how heavy is the act base plate?

A: It weighs 2 pounds or 950 grams