The K&M Clamping Desktop Monitor Stand is a height-adjustable stand with table clamp designed to securely support a near-field monitor. The solid steel construction with a large support plate is suitable for a wide range of monitors and other equipment in the same size/weight range—with a maximum load capacity of 55 lb.

The practical table clamp allows the Clamping Desktop Monitor Stand to be attached to tabletops with a thickness ranging from 0.39 to 2". Height is adjustable in 6 steps between 13 and 19". The support plate can be rotated 360° for perfect alignment. Rubber pads are included for secure, noise-isolating support of the monitor.

Supports Near-Field Monitors on Desktop    Large Support Plate (8 x 9.6")    Height-Adjustable: 13 to 19"    Clamp Attaches to Tabletop    360° Plate Rotation    Noise-Isolation Pads    Rugged Steel Construction

Related Questions and Answers

Q: 1. What is the minimum clamp depth required? My desk only has 1.5" of depth and I can't tell if that's enough. Thanks!

A: The Auray SMS-10CL Adjustable Clamp-On Desktop Studio Monitor Stand does not specify a minimum width/depth that its clamps can be mounted to, but based on the images provided that show the length of the tightening screws, this stand should be capable of mounting to thin surfaces as small as roughly half an inch. The SMS-10CL should have no issue mounting to a desk of 1.5" thickness.

Q: 2. Would the new Apple 27" display work in portrait mode on this stand?

A: Yes. The Gabor Mainmast DMS-200 Desktop Monitor Stand for 17 to 32" Displays BH #GADMS200 is compatible ith the included VEA adapter for the new Apple 27" Studio Display (Standard Glass, VESA Mount Adapter) BH #APMMYQ3LLA .

Q: 3. I have the KRK classic 5. Would the small or medium be better?

A: If you chosse the small one, your speaker will cover the whole tray 2 inches of overlap on both sides wide , and half and inch on the depth of spaeker . In the other hand medium size one your speaker will fit perfect wide front view and the back the tray will stick out like 1 3/4 on an inch.

Q: 4. I have speakers that are 12" deep and 8" wide that weigh 24 lbs. Will these stands securely hold the speakers?

A: The Auray SMS-10DT Adjustable Desktop Studio Monitor Stands each have a 9.75 × 11.75" plate with a raised edge on one side and will each support up to 45 lbs. If your speaker's weight is evenly distributed, the stands should work.

Q: 5. Does the top plate on which the monitors rest rotate, allowing for mounting on the side of a desk, or is it only forward facing?

A: No, the top plate on the Auray Adjustable Clamp-On Desktop Studio Monitor Stand is not intended to rotate.

Q: 6. Can this hold 2 "ASUS ProArt Display PA278QV" in portrait mode?

A: The Mount-It! Dual-Monitor Desktop Stand for Two 13 to 27" Displays BH #MOMI1781 will hold the ASUS ProArt Display PA278QV 27" 16:9 Adaptive-Sync IPS Monitor BH #ASPA278QV • MFR #PA278QV in portrait mode.

Q: 7. How sturdy is this headphone stand?

A: The, Auray HPDS-B Desktop Headphones Stand (Black) BH #AUHPDSB is made of steel, and has a solid amount of weight to it which makes it a very sturdy stand for headphones.

Q: 8. What are the dimensions on this and what is the adjustable height?

A: The K&M Speaker Monitor Stand's base plate has a diameter of 450mm (17.7 inches) and its top plate measures 205 x 245 mm (8 x 9.6 inches). The stand has an adjustable height from 950 to 1,450 mm (37.4 to 57 inches).

Q: 9. Would these fit the KRK ROKIT RP10-3G4 studio monitors?

A: The base of the KRK ROKIT 10 G4 measures 12.9 x 14.6" (width x depth) and the top plate of the Ultimate Support MS-80 Desktop Studio Monitor Stand measures 10.25 x 12". Even though the pads on the stand are shorter, they should still work with the ROKIT 10 speakers

Q: 10. Will this work for speakers that are 9"x7.5"?

A: Can you give us more info on your speaker model number and make of speaker so we can determine