The black 12 VAC Power Supply from Nightstick is designed specifically to supply AC power to Nightstick rechargeable lighting products. It is 6' in length and has a straight barrel plug connector on one end and a 2-prong AC US wall wart plug on the other.

For Nightstick Lighting Products    22 AWG 6' Cord    Straight Barrel Plug Connector

Supplies AC power to the chargers for the Nightstick rechargeable lighting products.

The 6' power supply has a straight barrel plug connector.

Related Questions and Answers

Q: 1. Is it pure sinewave?

A: No, the Wagan 3720 SlimLine 1000W 12 VDC to 115 VAC Power Inverter provides a modified sine wave output of 1,000 Watts.

Q: 2. Can i use this to power my atem mini without damaging it since atem mini power supply is 12v 18w? or can you recommend a 12v 18w power supply to use with Atem mini?

A: The Blackmagic Design International Power Supply for Video Assist 12G (12 VDC, 36W) BH #BLPWRSPVA12G is designed exclusively for Blackmagic Video Assist 12G series monitors. Per BMD: "The ATEM Mini comes with a 12V power supply. You can connect your own battery if you wish. The ATEM Mini will run on 9-20 Volts DC and consumes about 10 watts." IndiPRO Tools 12V D-Tap to Locking Right-Angle 2.5mm Cable for ATEM Mini Switcher (24") B&H # INDT25LRT

Q: 3. Will the 12 reflector take a Westcott 50w CFL bulb? I know these bulbs are big, with a wide base.Thanks.

A: No, they won't fit. That lamp base is too broad and the reflector narrows to merge with the bulb holder.

Q: 4. does it come with a cigarette plug adapter?

A: No, a cigarette plug adapter is not included with the WAGAN 3718 SlimLine 800W 12 VDC to 115 VAC Power Inverter. According to the manufacturer, if you were to use a cigarette lighter adapter, the Inverter will be limited to the amount of power it is able to draw from the DC port. The cigarette lighter plug on most vehicles is fused at 8 to 15 amps and you would not be able to draw the full 800 Watts that this inverter is capable of, but it would work at a lower potential wattage.

Q: 5. Can I have an LP-E6 battery inside the camera while using this cable plugged in and will it recharge the battery while powering the camera?

A: This A/C Power Supply will only power the camera.

Q: 6. Do I need to buy an additional cable to use with this to power the Meade LX200 12 inch ACF telescope?

A: In the Box Celestron PowerTank 17 17 Ah 12 VDC Power Supply Battery Pack 110V/220V Switchable Universal AC Adapter Cigarette Lighter Adapter Limited 2-Year Warranty You would have to provide an appropriate power cord (12V DC) for your Meade scope

Q: 7. Will this power the Blackmagic Cinema 6k Pro?

A: Yes, this will work with the 6K Pro as well.

Q: 8. How long is the cable and is this the original which is in the box of video assist ?

A: yes this is the same PSU that is included with the video assist recorders

Q: 9. Will it be okay to have an LP-E6 inserted while using this cable plug? (In case I need to move my camera and I have to unplug but want to keep the camera running)

A: It is okay to have an LP-E6 battery in the camera while using the A/C power supply. If the battery the charged and you remove the a/c power supply the camera will continue be running until the LP-E6 battery has been depleted.

Q: 10. How many watts of power does this supply?

A: 72Wh