The Plugable 7-Port USB 3.0 Hub expands USB connectivity by enabling up to seven USB 3.0/3.1 Gen 1, 2.0 and 1.1 devices to be added to any USB-A 3.0/3.1 Gen 1 or 2.0 port on a desktop, laptop, or tablet computer. Supporting standard USB 3.0/3.1 Gen 1 transfer rates up to 5 Gb/s, this hub allows data to move quickly between devices, and is ideal for high-throughput accessories such as USB external hard drives, flash drives, and USB graphics adapters. A 36W AC adapter is included. The matte finish resists fingerprints, while a physical on/off switch allows for easy power control.

5 x 0.9A USB-A Ports    2 x 1.5A USB-A Ports    USB-A Host Connector    36W AC Adapter

Seven USB-A ports are lined up front-and-center for easy access, with the power connection and host USB cable facing rearward to reduce cable clutter. Per-port LED status lights on the top of the hub indicate a successful connection between the device and the host computer.

In addition to standard data transfer and sync, this hub provides extra power on each port. Five ports deliver 0.9A at 5V for 4.5W of power. Two ports deliver 1.5A at 5V for 7.5W of power; special charging signals enable supporting devices to charge at a much faster rate.

This hub features the VIA VL813 USB 3.0 hub chipset updated to firmware version 9015 for maximum compatibility with almost all USB 3.0/3.1 Gen 1 hosts. It allows for full forward and backward compatibility between USB 3.0/3.1 Gen 1, 2.0, and 1.1 hosts and devices. This chipset is a 4th generation solution which emphasizes high performance and high power efficiency.

The hub itself requires no driver installation, but attached devices may require drivers. Support operating systems include Microsoft Windows XP and later, macOS, and Linux kernels 3.0 and later. Installing the latest USB 3.0 xHCI host controller drivers is recommended. This hub is not recommended for use with older Texas Instruments, Fresco Logic, Etron, or Wistron USB 3.0 host controllers. Please note, older Mac Pros with USB 3.0 PCI Express add-on cards may not work with this hub. The Apple SuperDrive is not compatible with this hub. Furthermore, 2.4 GHz wireless devices such as keyboard and mouse receivers and Bluetooth and Wi-Fi adapters may not work in close proximity to USB 3.0 devices or hubs.

Related Questions and Answers

Q: 1. Will it work with iMac Fall 2020?

A: Yes, the Sabrent 4-Port USB 3.0 Hub BH #SAHBIMCU is compatible with IMac's released November 2012 or later.

Q: 2. Does this hub work with Linux?

A: Yes, the Transcend 4-Port USB 3.0 Hub works with Linux Kernel 2.6.30 or later.

Q: 3. is the 18W DC Power Adapter 110v or 240v type?

A: This usb 3.0 hub comes supplied with a power adapter that takes an input of 110-240v, 50-60Hz. It has a North American two prong plug.

Q: 4. Can someone please tell me how long are the USB cable and the power cord supplied with this hub?

A: This item comes with 4' Power Cord, 2' USB Cord.

Q: 5. Would it still work without the power brick plugged in ?Just the USB pluged into it.

A: Yes, it would work. But it might get overloaded if high-drain devices like external drives are plugged in.

Q: 6. Hello, what is the size of the DC jack included? What is the input voltage which this power adapter has?

A: The voltage will be 100-240. As for the size of the DC plug, Sabrent recommends 12V 5 amp power supply. Sabrent recommends that you reach out to them directly for a replacement supply.

Q: 7. Can I power this hub using a USB power bank?

A: Yes, but not with full functionality. For instance, it will power a keyboard and mouse but not an external storage drive. It works great on AC power no matter what is plugged in but you will get limited function from USB power.

Q: 8. If I plug this into a USB 2.0 port on laptop, will it safely provide full required power to a USB 3.0 device using the AC adapter, while still allowing the device to communicate/sync/etc (at USB 2.0 speed) with the laptop?

A: Yes. The hub will work just fine with your USB 2.0 notebook and USB 3.0 device. There also would not be any issue with the power.

Q: 9. Power Cord Prong missing I bought two of these USB Hub. Both unit came with the power cord but not outlet prong . Did yours come complete?

A: Yes, mine came complete as far as I can remember.

Q: 10. Why doesn't my external drive show up on my desktop when plugged into this?

A: There are many reasons why that could be happening. Please reach out to us via email at pc@bhphotovideo.com so we can help you troubleshoot.