The CAMVATE 5/8"-27 Male to 3/8"-16 Female Microphone Screw Adapter, in a 2-pack, is a gold nickel brass 5/8"-27 male to 3/8"-16 female microphone screw adapter for microphone stands. In most cases, a mic holder, shock mount, or micro-boompole, is equipped with a standard 5/8"-27 connector, but for those occasional instances when a 3/8"-16 connector is employed, these screw adapters provide your solution for a proper microphone connector.

For Microphone Stands    Adapts 5/8"-27 Male to 3/8"-16 Female    Made of Nickel Brass

Related Questions and Answers

Q: 1. Will this work with my stereo clippy mics which end in a 3.5 male trs to be able to use the xlr inputs for my MixPre6?

A: The ALZO 3.5mm Female to Dual XLR Male Stereo Microphone Adapter Cord for Pro Camcorders is compatible with stereo microphones which use a 3.5mm TRS connector.

Q: 2. Would this work with my mm-bsm-8 binaural headphones and MixPre-3 II to enable use of the kashmir XLR preamps instead of the aux-in one?

A: No, the ALZO adapter will not work because the MM-BSM-8 binaural headphones require 1.5 to 10 VDC plug-in power and the XLR inputs on the MixPre-3 II can supply 48V phantom power which is way more than needed and will likely damage the mic. The mic is designed to be used with the 3.5mm stereo plug. We have not tested it with adapters to confirm whether there will be issues with phasing and/or noise created by using a Y-type adapter, but it is very possible that could happen. If did want to try using a stereo 3.5mm Y-cable, you would need to use two XLR adapters (one for each input) like the Rode VXLR+ (B&H # ROVXLRP) which has a built-in power converter that converts phantom power to plug-in power. For the Y-adapter, you can try the Hosa Technology Stereo 3.5mm Female to Dual Mono 3.5mm Male Airline Adapter (B&H #HOYCSMF2MMRA) which splits stereo to two individual mono outputs. Again, I do want to mention that we have not tested this setup to confirm whether it will work properly or if it will sound good. We recommend connecting the mic to a 3.5mm TRS input for the proper stereo imaging it was designed to create.

Q: 3. Can I use this to connect a Rode VideoMic Pro to a Tascam DR-40

A: Yes, you can use this to adapt the 3.5mm output from the mic to the XLR input on the Tascam.

Q: 4. Is this made of steel or aluminum?

A: This is made of aluminum.

Q: 5. Would this work with the Rode VideoMic NTG TRRS output (allowing you to record the signal in addition to the safety track separately) with any mixer with XLR inputs?

A: The adapter has a female 3.5mm TRS connector, so to avoid the possibility of any issues with compatibility, it would be better to use a TRS cable instead of the TRRS cable since the auto-sensing feature may not work properly when connecting to an adapter rather than directly to a mic input. For a standard TRS cable, you could use the Rode SC2 Right-Angle 3.5mm TRS Coiled Patch Cable (B&H # ROSC2). As an easier solution, you can use a single Y-cable with 3.5mm TRS and left/right XLR connectors like the Kopul Y-Cable with 1/8" TRS Stereo Mini to 2 XLR Male Connectors - 3' (B&H # KOSMYCM2XM03) or Hosa Technology Pro Stereo Breakout Cable - 3.5mm Stereo Mini to Dual 3-Pin XLR Male - 3' (B&H # HOHMX003Y) or Hosa Technology Stereo Mini-Phone (3.5mm) Male to 2 XLR Male Y-Cable - 6.6' (B&H # HOYCSMM2XM6). All of the Y-cables are available in longer lengths. The single Y-cable ensures a proper left/right split and helps to avoid introducing noise into the signal.

Q: 6. I would like to connect Rode wireless go to my Zoom f4. Could I use this adapter to connect them as such? Wireless Go 3.5mmTRSThis AdaptorXLR male to Zoom f4 XLR female?

A: That is correct.

Q: 7. Will this work to connect the Rode Filmmaker Kit to the Tascam DR-70D? I have tried several stereo cables, but it seems to only work with mono.

A: The xlr inputs on the tascam dr70d are mono inputs. the only stereo input is the 1/8in jack.

Q: 8. Are the pins collapsable for mounting a ball head on the screw?

A: No, the pins on the amaran Baby Pin Adapter to 3/8"-16 Screw are not collapsible.

Q: 9. Can someone confirm that this cable splits the right channel and the left channel? I'm thinking it might go well with the Deity Microphone V-Mic D4 duo on and ENG type camera such as the Sony FS5.

A: Yes. This cable will split the left and right on the 3.5mm to seperate male XLR conectors.

Q: 10. If I connect the 3.8mm to a Hollyland Lark Max, and the XLRs into an Ursa Mini Pro, will it split the left and right signals?

A: If the Hollyland Lark Max receiver is set to stereo mode, then the ALZO 3.5mm Female to Dual XLR Male Stereo Microphone Adapter Cord will carry left and right signals on the first and second XLR outputs respectively. If it is set to mono mode, the same mixed signal will be carried on both XLR connectors.