Power your ARRI ALEXA Mini using Gold mount or V-mount batteries with this 11.8" Right-Angle 7-Pin LEMO to Double D-Tap Female Cable from CAMVATE. The cable has two right-angle D-Tap female plugs on one end and one right-angle 7-pin LEMO on the other.

2 x Right-Angle D-Tap Connectors    1 x Right-Angle 7-Pin LEMO Connector

Related Questions and Answers

Q: 1. Would this be able to power the Atomos Ninja V using the included battery eliminator running off of the IndiPRO Micro Alpha Series 99Wh V-Mount Li-Ion Battery?

A: Yes, the following cable will work to power a Atomos ninja V. I would suggest looking into the following brand to power up you display. https://bhpho.to/3AIiDhJ

Q: 2. would this power the feelworld f6 plus safly when plugged into the dtap port from the smallrig 99w v mount battery?

A: No, you won't be able to fully insert the DC barrel from the IndiPRO Tools D-Tap to Locking 2.1mm DC Right-Angle Cable (24") into the FeelWorld F6 Plus 5.5" 4K HDMI Monitor since the monitor does not have a locking connector. Consider the Watson Pro D-Tap to 2.1mm Barrel Cable (19") as an alternative cable. The monitor accepts voltages between 7 to 24 volts. See the link below: https://bhpho.to/3zjOvuz

Q: 3. Will this also power the motor?

A: This is only listed as a Start/Stop recording cable. It does not provide power as well.

Q: 4. Is this compatible with the earlier model Alexa's such as the Classic and Alexa Plus?

A: No, the Alexa Classic and Alexa Plus use a Fisher 3-pin RS port. This cable has two 7-pin LEMO type connectors.

Q: 5. What is the speed of this cable? Is it at least 18 Gbps?

A: According to Atomos, "ATOMCAB007 is a 1.4 HDMI cable and its maximum speed is 10.2Gbps. This cable is not recommended for resolutions and frame rates above 4k 30p. If your customer is planning to shoot 4k 60p, this cable will not be suitable and a 2.0 HDMI cable would be required."

Q: 6. How long is the straight section of the miniHDMI connector before it angles? Wonder if it might work with a SHAPE cage on the a7s ii.

A: Hello umon K, its a little bit under 1 just about 9/16 of an inch.

Q: 7. Will this work with this Komodo Cage? https://www.bhphotovideo.com/c/product/1685623-REG/tilta_ta_t08_amv2_b_v_mount_advanced_po

A: The Tilta Nucleus-M Run/Stop Cable for ARRI ALEXA Mini with Tilta Cage (B&H# TIRS02AM) cannot plug into the Tilta Advanced Power Distribution Module for RED KOMODO (Black, V-Mount Type II) (B&H# TITAT08AMV2B): https://bhpho.to/3H8c4Lh

Q: 8. Would this work with smallhd Indie 7 locking barrel?

A: Smallhd recommends using their D-Tap to 5.5mm Male DC Barrel Power Cable (3') for use with the Smallhd Indie 7. https://www.bhphotovideo.com/c/product/1154925-REG/smallhd_cbl_pwr_dtap_bar_36_d_tap_adapter_cable.html/qa

Q: 9. Does this work with the Arri Alexa LF?

A: Yes, the ARRI Alexa Mini LF uses the same LBUS protocol as the Alexa Mini.

Q: 10. will this work with Blackmagic 7" 12g video assist monitor?

A: No, the IndiPRO Tools D-Tap to Locking 2.1mm DC Right-Angle Cable (24") is not the correct size barrel, as the Blackmagic Design Video Assist 7" 12G-SDI/HDMI HDR Recording Monitor has a 5.5 x 2.5mm DC input. You can use the DigitalFoto Solution Limited D-Tap to 5.5 x 2.5mm DC Barrel Power Cable (36.4") instead. See: https://bhpho.to/2OYfRCg