The Camplex 8-Channel LC Single-Mode Fiber Tactical Snake comes in a reel of 2000'. It is a ruggedized multi-channel fiber optic cable designed for multiple deployments for field production in outside broadcast, rental houses, and more. It is a highly flexible tight-buffered tactical cable with internal aramid strength members for crush resistance in high-traffic areas (if handled properly) and a polyurethane outer sheath designed to withstand crushing by both military tanks and outside broadcast vehicles. All assemblies are multi-stage machine polished and tested for <0.55 dB RL with test results for each channel supplied with each cable.

The Tactical Fiber Snake Reel includes Schill fiber optic cable reels with connector protection cavity and hinged latching door. The Schill reel has been carefully selected to ensure proper support and critical bend radius required by fiber optic cables.

Built with OCC multichannel tactical cable & heavy-duty connectors with dust caps

Individual channels ruggedized with Techflex protection & 24" fanout

Compact, round cable design for ease of transportation and deployment

Designed for use in adverse environments where reduced size and weight are important

Helically stranded cable core for flexibility, deployment survivability, and mechanical protection of the optical fibers

Cable has been tested and is suitable for use in military data communications applications

Can be used outdoors for temporary deployment directly on the ground in all terrains, including severe environments

Suitable for outside broadcast, industrial, mining, and petrochemical environments (chemical resistant)

Crush-resistant and resilient with a thick layer of aramid strength members

Polyurethane jacketed for abrasion, cut, and chemical resistance

Meets MIL-PRF-85045 specifications

Related Questions and Answers

Q: 1. Is there an aux cord? or would I need the usb cord and then an adapter to the phone?

A: The CDi2000 is designed for commercial installations. The inputs on this power amp are 3pin phoenix connectors. If you are looking to connect audio devices to the amplifier, it is recommended to do so with a mixer which can be wired with adapters to the phoenix connector inputs of the amplifier.

Q: 2. Does this version have the field replaceable battery?

A: Yes, it is. As a matter of fact, the first thing you have to do upon receiving the mic is to open the back and connect the provided battery. It takes all of 15 seconds. B

Q: 3. I this compatible with LED loads? (No flicker?)

A: Yes

Q: 4. Can this unit connect to Telex Audiocom MS 4002?

A: The SS 1002 units are not compatible with the MS 4002.

Q: 5. how does this work if I'm going directly in my camera (red scarlet mx..or my 5d mark 3)??

A: Well you'd need an adapter cable to connect it. While this would work it's really designed to supply a high quality signal to a standalone audio recorder for sync sound. It's hazardous to rely entirely on the camera for audio. A bad card or glitch in picture will affect audio as well. If the camera audio is scratch only then it's a useful reference and a backup in dire cases. If you have no option but to feed audio directly to the camera consider other options that are both more ergonomic and include a recorder: the Tascam d70 for example.

Q: 6. Is it possible to use LC fiber with these assuming I use the appropriate LC to X media converter?

A: The Sescom SES-X-FA4LXT01 4-Channel XLR Line-Level Audio-over-Fiber Extender Kit is compatible with LC fiber without the need for an adapter, as it is designed for ST fiber cables.

Q: 7. Is the AC power adapter supplied ?

A: Yes, the Rolls PB23 Single Channel Phantom Power Supply includes the Rolls PS27s AC Power Adapter with purchase.

Q: 8. the monitor headphones is mono or stereo?

A: This is a mono device, but you can monitor using stereo headphones

Q: 9. How do you use this with a 9 volt battery? I do not see any place to insert the battery

A: The battery compartment is located on the bottom panel of the M48 and is accessible by sliding and removing the battery case cover.

Q: 10. Are these compatible with ClearCom?

A: This beltpack is made specifically for the PortaCom system. so it would not be compatible with ClearCom equipment.