The Camplex 8-Channel ST Single-Mode Fiber Tactical Snake comes in a reel of 1250'. It is a ruggedized multi-channel fiber optic cable designed for multiple deployments for field production in outside broadcast, rental houses, and more. It is a highly flexible tight-buffered tactical cable with internal aramid strength members for crush resistance in high-traffic areas (if handled properly) and a polyurethane outer sheath designed to withstand crushing by both military tanks and outside broadcast vehicles. All assemblies are multi-stage machine polished and tested for <0.55 dB RL with test results for each channel supplied with each cable.

The Tactical Fiber Snake Reel includes Schill fiber optic cable reels with connector protection cavity and hinged latching door. The Schill reel has been carefully selected to ensure proper support and critical bend radius required by fiber optic cables.

Built with OCC multichannel tactical cable & heavy-duty connectors with dust caps

Individual channels ruggedized with Techflex protection & 24" fanout

Compact, round cable design for ease of transportation and deployment

Designed for use in adverse environments where reduced size and weight are important

Helically stranded cable core for flexibility, deployment survivability, and mechanical protection of the optical fibers

Cable has been tested and is suitable for use in military data communications applications

Can be used outdoors for temporary deployment directly on the ground in all terrains, including severe environments

Suitable for outside broadcast, industrial, mining, and petrochemical environments (chemical resistant)

Crush-resistant and resilient with a thick layer of aramid strength members

Polyurethane jacketed for abrasion, cut, and chemical resistance

Meets MIL-PRF-85045 specifications

Related Questions and Answers

Q: 1. the monitor headphones is mono or stereo?

A: This is a mono device, but you can monitor using stereo headphones

Q: 2. What are the costs of end caps for this model? Thanks!

A: We are sorry to say that Elasco does not offer end sets for any of the their Dropover systems. For End Sets you will need to look at their Cable Guard Products instead. For instance if you purchased the LG2125 Two-Channel Lite Guard Cable Protector then we have an end set for that. Here are links to both.https://bhpho.to/2NUHdV1https://bhpho.to/2LmC9qC

Q: 3. Is this compatible with the receiver from the Azden WLX-PRO VHF Wireless Lav Mic System (a href= http://www.bhphotovideo.com/c/search?N=10003656&InitialSearch=yes&sts=pi target= _blank http://www.bhphotovideo.com/c/search?N=10003656&InitialSearch=yes&sts=pi/a)?

A: No this is not compatible. The 35xt works as part of the 310/330 series UHF wireless system.

Q: 4. Can this unit connect to Telex Audiocom MS 4002?

A: The SS 1002 units are not compatible with the MS 4002.

Q: 5. what cables do I need to hook this up to my 70d??

A: Looks like you'll need to purchase a XLR F to 3.5mm (mono) male cable. The output of the SD MM-1 is Line level. So, the cable will need to be the type that can attenuate line level down to Mic level for the 70D to receive.

Q: 6. Is it possible to use LC fiber with these assuming I use the appropriate LC to X media converter?

A: The Sescom SES-X-FA4LXT01 4-Channel XLR Line-Level Audio-over-Fiber Extender Kit is compatible with LC fiber without the need for an adapter, as it is designed for ST fiber cables.

Q: 7. How long does the battery last under continuous usage? That is, how many hours of use on one charge?

A: I have used it for 6+ hour training sessions. I typically put it back in the stand during breaks but have not had any problems with the charge.

Q: 8. How do you use this with a 9 volt battery? I do not see any place to insert the battery

A: The battery compartment is located on the bottom panel of the M48 and is accessible by sliding and removing the battery case cover.

Q: 9. Could I use this to power my MKH 416 so that I can record audio straight to my A7III?

A: Yes you can, however please note this requires an AC power adapter to be plugged into the wall to run the pre-amp. Here's a battery powered solution for portability: BH #PS48PMPS.

Q: 10. Can I output to RCA with an adapter with no issues?

A: No you can not use RCAs with phantom power. RCA cables are not balanced.