This S6 150mm Filter Holder from NiSi features two filter slots for the convenient use of up to two 150mm wide, 2mm thick square or rectangular filters. Each slot is designed to grip an installed filter only along the surface of the filter's edges, so contact with a filter's front or rear-facing surfaces is avoided. Positioning filters is particularly important when using 170mm-long graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot. The S6 system allows the filter holder to rotate, and it has a lock to hold it in position. The filter holder supports the use of a rotating circular CPL.

This is the same filter holder found in the NiSi S6 Filter Kit. It is the filter holder only and does not include the required S6 adapter rings.

Supports 1 Circular/1 Rectangular Filter    S6 150mm Filter Holder Frame    Adapter for Tamron SP 15-30mm f/2.8    Circular CPL    Lens Cap    Pouch for Entire Kit

• Compatible with NiSi S6 150mm Filter Holder Kit
• Filter holder only; requires S6 adapter rings
• Holds two 150mm wide, 2mm thick filters
• Compatible with 150 x 150mm and 150 x 170mm filters
• Pull-and-release locking pin on the filter holder allows a reliable connection
• Lock design locks the holder to an adapter ring

Related Questions and Answers

Q: 1. Is Nid Is the NiSi 150mm holder compatible with Sony's 14mm FE 1.8 lens?

A: The NiSi S6 150mm Filter Holder Kit with True Color NC CPL for Sony FE 12-24mm f/2.8 GM Lens can be adapted to the Sony 14mm f1.8 lens with this adapter: https://bhpho.to/3DpaAs3

Q: 2. so many questions....1 How big are they? Will they fit all canon dslr? fit ? Is there a vid showing how to use? Is july 16 th still an expedited time

A: These are made specifically to fit the rear filter slot on the Tamron SP 15-30mm f/2.8 lens. A video is located on this product page under "Overview" that shows usage.

Q: 3. Will these work on the Sigma 14mm f/1.8 DG HSM Art Lens for Leica L? It says that they are for f/2.8 version.

A: This filter kit is only for the Sigma 14-24mm f/2.8 lens for Sony E or Leica L. The Sigma 14mm f/1.8 has a specific holder such as the NiSi S5 150mm Filter Holder Kit with Landscape Circular Polarizer for Sigma 14mm Art Lens, B&H # NI150FHSI14, which can take 150mm filters that are 2mm thick. https://bhpho.to/3eQ4p43

Q: 4. Where is the lens made?

A: As per our records, this lens is made in Japan. Please note that this is subject to change at any time.

Q: 5. Will a rear mount filter system like the one on this lens work with gradient gel filters (if those even come in a gel equivalent)?

A: In all our years of cinematography we have not heard of a rear gel grad filter ever being available. It is our opinion that it would not be practical. In order to fully utilizes grad filters, the user needs to position them precisely. That position may be higher or lower than the center of the frame. Also, it could be at an angle as well. This would be very difficult to manage in a rear gel. The clear solution is using 100mm filters in a holder such as NiSi S5 150mm Filter Holder Kit with Circular Polarizer for Select Tamron 15-30mm Lenses BH NIFH150T1530.

Q: 6. Can this be used with other Z lenses with 77 and 82 mm filter threads by attaching step-up rings to the adaptor ring?

A: Yes, in order to use the NiSi S6 150mm Filter Holder Kit with True Color NC CPL for Nikon NIKKOR Z 14-24mm f/2.8 S Lens on lenses with 77mm and 82mm filter threads, you need the NiSi S6 150mm Filter Holder Adapter Ring for Standard Filter Threads (105, 95, and 82mm), BH #NIS6FHR8295, and the NiSi 77-105mm Adapter for S5 150mm Holder for Standard Filter Threads, BH #NIADSFT77105.

Q: 7. Will this work with the Sigma 20mm F1.4 dg dn?

A: The Haida Rear Lens ND Filter Kit for Sigma 14-24mm f/2.8 DG DN Art Lens E/L-Mount & Sigma 24mm f/1.4 DG DN Art Lens E-Mount is not compatible with the Sigma 20mm f1.4 DG DN lens.

Q: 8. What is the difference between this lens with a G2 designation and the same lens without the G2?

A: To the MORON that answered "read the spec"! Michael asked his question because the spec does not spell out the difference. If you don't read the description for the product, then don't post here. People only ask legitimate because the answers were not provided in the description. Why would you pay hundreds more for a lens that is not any different from it's predecessor? Stop being hateful! We are supposed to be her to help.

Q: 9. According to Canon, it is not recommended to use filter in the lens rear filter slot at the widest zoom because the rear glass element will hit the filter. Does anyone have this experience?

A: Yes when using these filters with a lens such as the Canon 11-24 care must be taken not to set the lens onto the widest zoom setting.

Q: 10. Where can I get a replacement lens cap for this lens?

A: I'm sorry, we no longer carry that cap, as it has been discontinued by Tamron.