Though monitoring HD video signals outdoors can be difficult, the SmallHD 703 UltraBright On-Camera Monitor, with its 2200 cd/m² bright backlight, overcomes this environmental difficulty. The 7" 1920 x 1080 LCD provides a sharp image, ideal for focus pulling and image analysis on set and in the field. Another advantage of the high-brightness panel is the monitor's ability to preview HDR content. HDR preview extends the display's dynamic range to portray a greater range of brightness in the image.

A unibody aluminum exterior keeps the monitor durable yet lightweight, while also acting as a heatsink for the internal electronics. The LCD panel itself is protected by a layer of optically-bonded Gorilla Glass, notable for its transparency and toughness. The optical bonding process ensures that blacks are not washed out and reduces the harshness of reflections.

On the sides of the display are the SDI and HDMI I/O. Having dual SDI ports allows for A/B viewing of two different SDI signals, or the secondary port can be assigned as an output for sending an SDI signal downstream to another monitor, switcher, or wireless accessory. All the functionality of the monitor is available via the PageBuilder OS, which provides advanced functionality with a simple and efficient graphical user interface.

SmallHD 703 UltraBright 7" Monitor    ARTEMIS Gen 2 Monitor Bracket    31.5" Thin BNC HD-SDI Cable    2-Pin LEMO 0B to 2-Pin LEMO Power Cable

PageBuilder OS is an intuitive graphical user interface (GUI) that puts all the advanced functionality of the 703 UltraBright at your fingertips. Rather than have confusing menus, this GUI allows you to selectively apply monitoring tools such as waveform, vectorscope, multiview, LUTs, and focusing aids on different "pages". These pages can be easily flipped through using the joystick. The buttons on the front panel can also toggle monitoring tools on and off for each page.

To keep your images consistent from production through to post-production, ColorFlow allows you to import 3D LUTs and display the treated image side-by-side with the untreated image to correctly gauge exposure while visualizing what is being recorded by the camera. Side-by-side preview can also be used with the HDR preview function. Separate LUT-treated images can be sent downstream over SDI and HDMI so you can have the 703 UltraBright display a log image or LUT-treated image, while the director or client monitors connected to the outputs can receive images treated with a different LUT. An image capture function saves a still frame from the incoming video stream onto an SD card, and records the applied 3D LUT for post-production reference.

PageBuilder OS has a dedicated "Output Preview" page which allows you to apply LUTs and other image adjustments specific to the output signal from the monitor. Whether you have your camera connected to the HDMI or SDI input on the 703 UltraBright, you are not limited by that protocol; the 703 UltraBright cross-converts to ensure compatibility with downstream hardware.

Fill the screen with up to three simultaneous scopes, including waveform, vectorscope, and histogram, while still being able to observe the camera feed.

Exposure Assist supports both ARRI and Spectrum based false color, with built in IRE guides for reference. Utilize 2x Zebra to warn you when reaching a brightness level of your choosing. This is great for matching exposure across shots and cameras.

As recording resolutions increase, so does the importance of focusing precision. With Focus Assist, you can highlight the areas that are in focus with a bright color. These highlights are easily visible on the fly for quick focus confirmation. Focus Peaking increases the sharpness of the image for a subtler focus confirmation without the need for bright outlines. The color and intensity of these tools are adjustable to fit your preference.

Select standard markers and safety areas that can be overlaid on the display as lines or matte overlays, with custom opacity level and colors. Default aspect ratios include 4:3, 1.85, 2.39:1, 16:9, and Custom (user selectable).

Separately available DV, V-Mount, or Gold Mount battery plates can be attached to the rear of the display. A mounted battery can power the monitor, as well as attached accessories, through the 12V LEMO pass-through connection.

Related Questions and Answers

Q: 1. Will this also work with the 702 Bright?

A: no this will not fit the 702 bright

Q: 2. How easy is it to switch monitor brightness? I believe one won't need all that brightness for indoor use.

A: It is very east to adjust the backlight brightness.

Q: 3. Does this come with a D-tap Lemo cable?

A: Yes, the SmallHD 2-Pin LEMO to D-Tap Power Cable (36") is included with this monitor.

Q: 4. It says it's compatible with the Teradek 500 series. Can this be used with the 500 XT, specifically?

A: Yes it can

Q: 5. Is there a horizon indicator with this?

A: Not that we are aware of. A horizontal line indicator is not listed as a feature of this monitor.

Q: 6. How is this item discontinued? Isn't this a brand new monitor?

A: At this time B&H is not stocking this item.

Q: 7. The specs here say the 703 has 8bit color depth, but the Smallhd site says its 10bit, which is correct?

A: When it comes to specifications, the manufacturer's website takes precedent. In this case, ye,s the 703 was listed by SmallHD as being 10bit. However, apparently this is moot for the 703 Ultra Bright is no longer available.

Q: 8. Color or Black and White?

A: The SmallHD 703 UltraBright is a color monitor.

Q: 9. Can you share the specifications of the screws you use to attach the cage to the monitor?

A: According to SmallHD, the SHD invetory description for the screws are as follows, Flat Head Socket Cap, 6-32, 7/16"L, BlkOx PRT-90051-001

Q: 10. Is this new or used?

A: tesxgh