The magnetically designed Mini Energy Tube LED Light from YC Onion is a 1.6 x 5.9" tube light that provides variable color from 3200 to 6200K with a high CRI of 97. It enables 0 to 100% brightness control, offering an RGB mode with 360° color wheel for custom hue selection. Equipped with a strong magnet, it can be simply attached to any metal surface to achieve your output needs in various lighting setups. Additionally, it delivers customized special lighting modes including Flash, RGB, CCT, and 15 included effects.

This lightweight mini tube allows combining multiple tubes together with quick attachment and release in order to meet the photographer's demands at any time. The pocket size tube light runs on an integrated 2000mAh lithium battery that enables a runtime of 60 minutes at full power of 6W. It runs for up to 12 hours and can be used as a power bank charging source for other equipment via its USB output. This tube includes side and bottom 1/4"-20 threads that allow it to be mounted to photography accessories such as cameras and tripods. Easy to use and versatile, it can be effortlessly controlled by your smartphone via YC Onion's app.

Magnetic Tube Light    Measures Only 1.6 x 5.9"    3200 to 6200K Color Temperature, 97 CRI    15 Special Lighting Effects    60-Minute Battery Runtime at Full Power    Built-In Lithium Battery    Combines with Multiple Lights    Mounts to Accessories    Works as Power Bank    Smartphone Control via App

Related Questions and Answers

Q: 1. Does this device has a built in flash?

A: No, the YC Onion Energy Tube Pro RGB LED Light (42") does not have a Flash built in for photography. It will not connect to or synchronize with your camera. It does use LED's to simulate a Flash Effect which would be used more for video purposes. This can be used for photography by way of its LED continuous light. You will be able to control the color of the light as well as the intensity.

Q: 2. Does it work with RS3?

A: No, the YC Onion YC RS2 Interlink Module for RS2 & RS3 Pro is not compatible with the DJI RS 3 gimbal, as the RS 3 does not have the electronic contacts for remote control like the RS 3 Pro does.

Q: 3. will they make one for the yolobox pro?

A: This cage should work for both. The Yolobox Pro is the same size as the original Yolobox.

Q: 4. Is the shutter cable compatible with a Nikon D850?

A: No. Please review the following item that is needed. Vello 2.5mm Remote Shutter Release Cable II for Nikon 10-Pin Cameras BH #VERCC2N125 • MFR #RCC2-N1-25 https://bhpho.to/3t7vLLR

Q: 5. Will this work with GVM sliders?

A: The YC Onion Stability Arms for Sliders (Pair) will work with almost every model of GVM sliders, however for extra comfort, you can always go with the GVM variant themselves, the GVM Aluminum Slider Support Rods (Pair): https://bit.ly/3sEMjxp

Q: 6. It mentions in the specs that the track length is 2.8'. Is this the total length (3 sections combined)?

A: The YC Onion Chips 3.0 Motorized Slider comes with three sections. The L: 2.8' / L: 86 cm dimension is all three sections locked together.

Q: 7. Does the kit include belt clamps (parts that mount the belt to the hot dog manual slider)?

A: The YC Onion Hot Dog Bun Motor has all parts needed to mount to the slider to provide motion.

Q: 8. Can you use larger batteries or does it have to be the NP-F550's?

A: As long as they're Sony L-series batteries you're fine. The description also says you can use "two virtually ubiquitous L-series batteries." They're just using NP-F550's as an example.

Q: 9. does this include the motor?

A: The YC Onion Chips 3.0 Motorized Slider Dolly (B&H# YCCHIPSV3C) comes with a motor but requires a Sony L-series compatible battery.

Q: 10. Can this be used to link a DJI RS 2 to the edelkrone App?

A: No, the YC Onion YC RS2 Interlink Module for RS2 & RS3 Pro is intended for use with the YC Onion App exclusively, for use with YC Onion products.