Get individual control of each LED of this 16.4' reel of 8PX60 RGB LED Strip from ENTTEC. Designed to operate at 12V, this highly flexible LED tape will give lighting technicians a versatile solution to integrate RGB color into architectural and entertainment projects. It is ideal for scenarios where displaying large-scale, smooth, and precise animated graphics with soft pastels or vibrant saturated colors is the key.

The 8PX60 has a white printed circuit board and boasts 60 individually-controllable RGB pixels per 3.2'. The behavior of each LED is completely independent of the others on the strip, giving you fine control and a superior uniform light output along its full length. Furthermore, each pixel offers consistent brightness and extended color gamut. Every pixel can achieve 16.7 million possible colors for each LED chip with a scan frequency of 2 kHz, ensuring that all animations can be played back smoothly.

White Printed Circuit Board    60 LEDs per 3.2'    122 Lumens per 3.2'    12V Operation    Can Be Joined Together    Cut for Customized Fit

• Single-pixel control
• Outputs up to 122 lumens per 3.2'
• Superior copper tracks to reduce the effects of voltage drop
• Durable with improved heat dissipation and current flow

The strip can be joined together and also allows cutting for a customized fit. You can cut it down every 16.6mm to meet your creative demands.

If any LED gets damaged or physically removed from the strip, the tape will still function without affecting your LED mapping.

By combining your LED strip with ENTTEC's pixel control systems, you can easily provide data to the light.

Related Questions and Answers

Q: 1. Is this RGB adjustable or just white & blue light?

A: The color of the Adam Hall Dual Gooseneck RGB and White COB LED Rack Light is adjustable.

Q: 2. Could this Led light only be controlled via Wifi?

A: The TP-Link KL400L5 Kasa Smart LED Light Strip (16.4', Multicolor), B&H # TPKL400L5, has multiple control options. The light strip comes with a smart controller accessory, but it can also be controlled over a Wi-Fi connection via the Kasa Smart App for iOS & Android, or with a voice assistant such as Amazon Alexa, Google Assistant, or SmartThings.

Q: 3. Can multiple strips be synced together in Sidus App to perform the same effects simultaneously?

A: The amaran SM5c LED Light Strip (16.4', Multicolor), BH # AMSM5C, can be extended to a length up to 32.8' (extension available separately). Open the Sidus Link APP to add the strip light. After the connection is successful, the strip light can be controlled.

Q: 4. Size, outside dimensions?

A: The dimensions are 3.5 x 2 x 0.8" / 88 x 52 x 21 mm

Q: 5. How can these be placed on the ceiling?

A: The light strip comes with a roll of double-sided adhesive tape. It won't hold for long though, so I'd suggest using a glue gun, spray adhesive, or stronger double-sided tape. You could also use a large staple gun or cable clips. We used a glue gun to mount to the underside of wooden shelves and it worked out great.

Q: 6. so what is the RGG and the bi color differences? Can the RBG do the white color? if yes then RBG can also do like the Bi Color?

A: The difference between the RGB mode and the bi-color mode of the Godox LC500R Mini RGB LED Light Stick (White, 18") is that the former consists of red, green, and blue LEDs that can be mixed together to create other colors, while the latter uses a different set of LEDs on the light stick to give you colors expressed only in "color temperature" or "Kelvin". Bi-color mode ranges from a warm color known as "tungsten" or "3200 Kelvin" and is adjustable to the white light range known as "daylight" or "5600 Kelvin".

Q: 7. NOBODY in ANY Review speaks about any PROBLEMS with this light. Mine does nothing but flicker, I cannot get it to stop and just behave like all the videos show. I'm so disheartened by this. Obviously, if you read all the Q&A, I've put spectacular research to find answers to my questions. This one has ZERO leads in any info I've found: How to stop the flickering? Help! Please.

A: If the flickering is from the LED diodes itself, the easiest way to avoid flickering with lights and LEDs would be to slow your shutter speed down manually in Tv/S or Manual exposure mode to a shutter speed that is slower than the pulsation/frequency of the LED. Try a slower shutter speed and see if that helps!

Q: 8. Hi, is Nanlite Forza mini reflector RF-FMM-45-S compatible with (mini Bowens alike) Neewer mount ? Regards

A: No, two different mounting systems making the Neewer system more backwards compatible and offering a wider range of light shaping tools.

Q: 9. One more question :) Is the baby pin receiver also functional as a Junior pin for combo stands? Cheers

A: The baby pin receiver on the Nanlite FC500C RGB LED Spotlight is a bit small and should not be used in a junior pin receptacle.

Q: 10. It can be used with the Good BLP projection attachment?

A: Yes, the Godox SL150R RGB LED Light can be used with the Godox BLP LED Projection Attachment for Bowens BH #GOBLP.