The RapcoHorizon Isoline-2 Line Level ISO / Splitter Box is wired with a 2-pin hot XLR. It provides quality 1:1 line-level output transformers for applications requiring a high degree of electrical isolation. It is used in applications such as servo balancing, breaking ground loops between pieces of equipment with unbalanced lines, and floating the unbalanced outputs of a crossover unit, or an unbalanced mixer output that must run down long cables to power amp inputs.

Transformer isolation in any such situation should minimize interference from radio transmitters, lighting dimmers, and 60 Hz AC power wiring, and help goof-proof sound systems and installations from improper connections or faulty conditions.

It features a ¼” input (can be used balanced or unbalanced), a ¼” loop out with an XLR male output, a ground lift switch for buzz-free operation in almost any environment and an 18 gauge formed steel box. The connectors and the switch are recessed to resist damage.

The Isoline-2 Line Level ISO / Splitter Interface Box provides quality 1:1 line-level output transformers for applications requiring a high degree of electrical isolation only transformers can provide

Uses Include: Servo balancing, breaking ground loops between pieces of equipment with unbalanced lines, floating the unbalanced outputs of a crossover unit, or an unbalanced mixer output that must run down long cables to power amp inputs

It features a ¼" input (can be used balanced or unbalanced), a ¼" loop out with an XLR male output, a ground lift switch for buzz-free operation in almost any environment

Heavy-duty steel box

High-quality connectors and transformers

Individually tested for performance and quality

Related Questions and Answers

Q: 1. will this splitter pass 120hz to both outputs?

A: Unfortunately, the manufacturer does not explicitly define this function and this product is not listed as a distribution amp, but a simple splitter. We would recommend consulting the product manufacturer for accurate verification.

Q: 2. Is it powered or does it require an external amp?

A: This unit is not powered. It is a passive split. No external amplifier necessary. Send your signal IN and enjoy the 8 individual OUTs

Q: 3. Hello! I just made the payment for the product Boss WL 20L. Do I need to know when you'll have it in stock? I need it with some urgency. Thank you!

A: 773236870 order canceled

Q: 4. Does Dot Line Matte Box MB3 fit sony ax100 4k ?

A: Not unless you buy a universal base plate that has the height to elevate the camera above the lens opening. The kicker is that even cheap base plates are several hundred dollars. Hope this helps.

Q: 5. Can I use this with the Roland AX Edge? Is is 100% compatible?

A: Yes it will work with the Roland ax edge, or any audio gear with 1/4 trs output.

Q: 6. Will this matte box cause a vignette with a 18mm lens on a super 35 camera (FS700)?

A: It completely depends on how far forward you have the 18mm lens in the matte box. I know that sounds obvious, but if you are using a prime 18mm, and you don't have the matte box back close enough to the lens, then yes, you will get some vignetting. Just slide your box closer to the lens and you'll be fine.

Q: 7. Is this product made in U.S.A ?

A: According to the information we have, our current inventories Country of Origin is Mexico. Please be aware this can change over the product's production life without notice.

Q: 8. What does Rod Mount Matte Box for 86mm Threads Mean?Clearly it is 15mm mounted. Does it also have threads to screw onto 82mm lenses? (this is what I am looking for)

A: Hello Kevin. 86mm (3.386 inch) diameter hole is inside Matte Box. For your lens 82mm (3.22 inches) works perfect. I use a 16mm lens Rokinon T2.2 CINE, and I had no problems. Bye. I hope to help an answer to this question.

Q: 9. Is the output signal truly FULLY balanced, i.e. is there both a (+) and out-of-phase (-) signal?

A: Yes, the outputs are fully balanced

Q: 10. Is this actually the model with metal parts (doors, etc)? I want to order, but I dont want to recieve the lesser model that has the plastic doors

A: Yes this model has a rugged aluminum frame and sturdy ABS box with aluminum independent flags.