The upgraded Pro800 Plus Full HD Video Transmission System from Crystal Video Technology delivers up to 1080p60 video via HDMI or 3G-SDI connection up to 2625'. The system includes one transmitter and one receiver capable of transmitting video, tally, and intercom communication via 5.1 to 5.9 GHz frequency band. A 3G-SDI loop output on the transmitter facilitates local monitoring.

Both components have OLED displays and onboard buttons to toggle between modes and channels. On top of communicating live status and directions from the director, both devices can also share synchronous timecode. An included articulating arm and 1/4"-20 threads on each device offer mounting solutions. Power can be delivered via V-mount battery plates or using the DC inputs on either component. Antennas are included for both the transmitter and receiver as well as for tally communication.

Transmitter and Receiver Set    1 x HDMI, 1 x 3G-SDI Input    1 x HDMI, 1 x 3G-SDI Output    Support for up to 1080p60 Video    2625' Line-of-Sight Transmission    Tally and Intercom Communication    Zero Latency, 5.1 to 5.9 GHz Frequency    OLED Displays, V-Mount Plates

• Supports transmission of full HD 1080p video
• 2625' line-of-sight video transmission, 984' tally and intercom transmission
• Zero latency
• Transmitter: HDMI and SDI inputs, SDI loop output
• Receiver: HDMI and SDI outputs
• 5.1 to 5.9 GHz frequency band
• V-mount battery interfaces
• OLED displays
• 1/4"-20 mounting threads

Related Questions and Answers

Q: 1. Could you pair more than one receiver?

A: Not that we are aware of as the receiver for this product is not available for a separate purchase. However, you can send the transmission to up to 4 Smart Devices. While you will not be able to add a 2nd wireless receiver, you can use this system with Smart Devices as well.

Q: 2. does the transmitter attach to SmallRig V-Mount Battery Adapter Plate with 15mm LWS Rod Clamp & Adjustable Arm BH #SM3204 MFR #3204 then v-mount battery attach to transmitter and power both (transmitter and BH #SM3204 MFR #3204) ?

A: The CAME-TV Crystal V can attach to the SmallRig V-Mount Battery Adapter Plate. A V-mount battery can be stacked as well and pass power to the plate.

Q: 3. How would you compare to a Hollyland Mars 400, Teradek 500 and others?

A: The customer feedback on the Mars 400 units has been fairly positive. The Teradek 500 series has had a longer period of exposure on the market and is generally considered a higher level system by industry professionals, but the decision of which would be the proper wireless video system for one's given application is solely dependant on the user's requisites for "critical" content acquisition -- in other words, whether or not the signal is being sent for recording purposes or whether it is being transmitted for monitoring only.

Q: 4. Will this work with TRIGYN Gear AC Adapter to Arri Standard 2-Pin Lemo Power Cable?

A: It will not as this does not have a 2-Pin Lemo Connection. This system has a 2.1mm barrel for power.

Q: 5. Can you buy like 3 of these for 3 different cameras and monitor them all on one screen (i.e. the Lilliput A12) or is there a wireless interruption between multiple?

A: This product uses a frequency range between 5.18 to 5.8 GHz. It is possible, but this will depend on if you can find three free frequencies in your area to operate 3 sets.

Q: 6. If using Sony NP-F970 battery with TX and connect with SONY A6500 with HDMI how long can work without any break and which third party brand is work perfectly?

A: Unfortunately we do not have any specific tests for how long these batteries will last on a 970 battery. This Transmitter/Reciever combo will work with any third party NP-F style battery. Some of the batteries that we recommend the most are Watson NP-F975 Battery Kit with Compact AC/DC Charger B&H # WANPF975CK MFR # C-4203BKII IndiPRO Tools NP-F980 6600mAh Li-Ion Battery & Single Charger Kit B&H # INPFKT1 MFR # INPFKT1 Dracast 1x NP-F 6600mAh Battery and 1 Charger Kit B&H # DRBK1NPF6600 MFR # BK-1XNPF6600

Q: 7. What is the DC input barrel diameter?

A: The cable diameter is 2.1mm. The power connector is standard 5.5mm jack.

Q: 8. What is the difference with the new model and the previous Quad Model? What improvements?

A: The line of sight distance support has been improved by almost 1000 feet; this new release can handle up to 1640 feet.

Q: 9. So it supports up to 1080, if I shoot in 4k, will it still send a signal? Just drop it down to 1080, or will it only transmit if youre shooting 1080, also, will it transmit peaking as well, can I use this for a focus puller?

A: This does not accept a 4K signal, however most cameras that shoot 4K can still output in HD while shooting in 4K. You should still be able to use this product. Peaking will also depend on the monitor used by the focus puller. If that monitor offer peaking, it will work.

Q: 10. Does it support 10bit 4:2:2 ?

A: Yes it does.