Featuring an aluminum frame with small built-in magnets, the Magnetic Clip-In Filter from Kolari Vision secures magnetically to the RED KOMODO cinema camera lens mount to sit securely between your camera and lens. It is a great solution when your lens doesn't feature front filter threads, or if you want to add an additional filter to your single-filter matte box setup. This combination Mist Diffusion 1/2 filter creates a glowing, nostalgic haze aura effect to your image while still retaining sharpness and contrast. The Mist Diffusion filter is combined with ND0.9 filtering, which reduces light into your sensor by three stops.

The filter glass features an antireflective multicoating, making the filter dust, scratch, and water resistant. It is designed to increase the transmission of light through the lens to the sensor, and it helps reduce flares and ghosting. A separately available mag mount accessory is required for attaching the filter to the camera.

Magnetically Attaches to Camera Mount    Sits Between Camera and Lens    Aluminum Frame with Built-In Magnets    Requires Separately Available Mag Mount    Antireflective Multicoated Glass    Dust, Scratch, and Water Resistant

This Mist Diffusion Filter 1/2 is combined with an ND0.9 filter that reduces light into your sensor by three stops. The Mist Diffusion effect adds a touch of ethereal beauty to your videos. With its unique ability to create a gentle, glowing haze effect, this filter opens up a world of creative possibilities. By delicately defocusing certain light elements while maintaining optimal sharpness and contrast, the Mist Diffusion Filter 1/2 adds a cinematic, nostalgic aura to your images. It's the perfect tool for evoking a dreamlike atmosphere or enhancing portraits by smoothing skin imperfections and blemishes.

• Optical glass with multiple coatings
• Water resistant
• Smudge resistant
• Dust resistant
• Scratch resistant

Related Questions and Answers

Q: 1. I'm so confused by this, because the RED Komodo doesn't have an R/S port. So how does this "plugs into the R/S port of the camera" if the camera doesn't have an R/S port? The Komodo has an EXT port that can breakout to various ports. So does this cable plug into that EXT port on the camera? Or what? Very confused by this.

A: You can purchase the Wooden Camera B-Box for the RED Komodo and there is a R/S port on the box. https://www.bhphotovideo.com/c/product/1572815-REG/wooden_camera_280500_b_box_red_komodo.html

Q: 2. Can it be used on FJ200?

A: The Westcott FJ200 Diffusion Dome, BH # WE4747 would be the correct option for the FJ200. https://bhpho.to/3DVEi7v

Q: 3. How may pins on the camera end?

A: The camera end has the correct connections for the Red Komodo. There is no info listed beyond that as this cable only works with the Red Komodo.

Q: 4. Is this only for the Nucleus M, or would this also work with the Nucleus Nano?

A: This will only work for the Nucleus M. The 7-pin end of this cable fits onto one of the motors and the other end into the R/S port of the RED Komodo. The Nucleus Nano uses a 3.5mm jack on both ends.

Q: 5. Can we put the RED Komodo outrigger on top of this? Thanks.

A: Unfortunately no, the contact pad for the Outrigger Handle and Bright Tangerine does not have an additional contact loop. Check out Alvin's Cables for an affordable solution. I believe they make a cable that converts from 9-pin to 3-pin. You can also use the Wooden Camera Breakout Box for the Komodo as well. https://alvinscable.com/collections/run-stop-cable

Q: 6. Will this cable also power the focus Nucleus-M motor?

A: The Tilta Nucleus-M Run/Stop Cable does not power the Nucleus-M focus motor.

Q: 7. Can this be mounted on top of the Outrigger Handle just as a NATE rail, even if the R/S function is ignored?

A: No, the mounting pattern on the Bright Tangerine Run/Stop Top Plate for RED KOMODO/KOMODO-X is too wide to mount on top of the RED DIGITAL CINEMA KOMODO Outrigger Handle.

Q: 8. Which cable is needed to connect this to the Nucleus Nano r/s? (using on Komodo)

A: Please review the following item in order to do so. Tilta Nucleus-Nano Run/Stop Cable for 3-Pin Fischer Cameras BH #TIRSWLCT4AM3 • MFR #RS-WLC-T04-AM3 https://bhpho.to/36PbBhZ

Q: 9. What cable is needed to connect to the Nucleus M Motor?

A: A 3-pin Fisher to 7-pin LEMO-type cable.

Q: 10. Is this compatible with the bright tangerine side plates for the KOMODO?

A: Yes, The Bright Tangerine Run/Stop Top Plate for RED KOMODO would be compatible with the Side rail kit from BT BH #BRRKSPK.