Featuring an aluminum frame with small built-in magnets, the Magnetic Clip-In Filter from Kolari Vision secures magnetically to the RED KOMODO cinema camera lens mount to sit securely between your camera and lens. It is a great solution when your lens doesn't feature front filter threads, or if you want to add an additional filter to your single-filter matte box setup. This combination Mist Diffusion 1/8 filter creates a glowing, nostalgic haze aura effect to your image while still retaining sharpness and contrast. The Mist Diffusion filter is combined with ND0.9 filtering, which reduces light into your sensor by three stops.

The filter glass features an antireflective multicoating, making the filter dust, scratch, and water resistant. It is designed to increase the transmission of light through the lens to the sensor, and it helps reduce flares and ghosting. A separately available mag mount accessory is required for attaching the filter to the camera.

Magnetically Attaches to Camera Mount    Sits Between Camera and Lens    Aluminum Frame with Built-In Magnets    Requires Separately Available Mag Mount    Antireflective Multicoated Glass    Dust, Scratch, and Water Resistant

This Mist Diffusion Filter 1/8 is combined with an ND0.9 filter that reduces light into your sensor by three stops. The Mist Diffusion effect adds a touch of ethereal beauty to your videos. With its unique ability to create a gentle, glowing haze effect, this filter opens up a world of creative possibilities. By delicately defocusing certain light elements while maintaining optimal sharpness and contrast, the Mist Diffusion Filter 1/8 adds a cinematic, nostalgic aura to your images. It's the perfect tool for evoking a dreamlike atmosphere or enhancing portraits by smoothing skin imperfections and blemishes.

• Optical glass with multiple coatings
• Water resistant
• Smudge resistant
• Dust resistant
• Scratch resistant

Related Questions and Answers

Q: 1. This cable looks like it would work to connect the Tilta Side Wooden Handle 2.0 with R/S Button to the Komodo EXT port to allow run/stop. Anyone confirm?

A: Tilta does not currently have a Side Wooden Handle that is designed to work with the Red Komodo.

Q: 2. Can we put the RED Komodo outrigger on top of this? Thanks.

A: Unfortunately no, the contact pad for the Outrigger Handle and Bright Tangerine does not have an additional contact loop. Check out Alvin's Cables for an affordable solution. I believe they make a cable that converts from 9-pin to 3-pin. You can also use the Wooden Camera Breakout Box for the Komodo as well. https://alvinscable.com/collections/run-stop-cable

Q: 3. Can this be mounted on top of the Outrigger Handle just as a NATE rail, even if the R/S function is ignored?

A: No, the mounting pattern on the Bright Tangerine Run/Stop Top Plate for RED KOMODO/KOMODO-X is too wide to mount on top of the RED DIGITAL CINEMA KOMODO Outrigger Handle.

Q: 4. Will this work on the RED VRAPTOR ?

A: According to Bright Tangerine, this only works with RED KOMODO Outrigger Handle.

Q: 5. Is this only for the Nucleus M, or would this also work with the Nucleus Nano?

A: This will only work for the Nucleus M. The 7-pin end of this cable fits onto one of the motors and the other end into the R/S port of the RED Komodo. The Nucleus Nano uses a 3.5mm jack on both ends.

Q: 6. There are two posts with different answers from B&H. In Feb 2021 Geetika writes "You can purchase the Wooden Camera B-Box for the RED Komodo and there is a R/S port on the box. https://www.bhphotovideo.com/c/product/1572815-REG/wooden_camera_280500_b_box_red_komodo.html" implying it's a 3 pin connector. But in March 2022 Gracem writes "One end is 7-pin for connecting to one of the Tilta Nucleus-M motors, and the other end is the 9-Pin LEMO to plug in the EXT port on the Komodo.". So it 3 or 9 pin? Can you please give us a definitive answer?

A: The Tilta Nucleus-M Run/Stop Cable for RED KOMODO (27") is designed to connect to to connect directly from a Tilta Nucleus M controller and not through the B-Box.

Q: 7. I think the confusion in all these questions, which is still not answered is.... does this cable just go into the EXT port at the back of the KOMODO... is that the "R/S" port. Can the Tilta representative please answer this? And does it matter which port it comes into on the motor? 1, 2? no matter? (Just bought this cable)

A: The R/S function is shared within the EXT port. Any reference to the RED KOMODO's R/S port is going to point to the EXT port. The Tilta Nucleus-M Run/Stop Cable for RED KOMODO uses the EXT port on the RED KOMODO.

Q: 8. How may pins on the camera end?

A: The camera end has the correct connections for the Red Komodo. There is no info listed beyond that as this cable only works with the Red Komodo.

Q: 9. Is this a 3-pin fischer or a 9-pin LEMO?

A: One end is 7-pin for connecting to one of the Tilta Nucleus-M motors, and the other end is the 9-Pin LEMO to plug in the EXT port on the Komodo.

Q: 10. Will this cable also power the focus Nucleus-M motor?

A: The Tilta Nucleus-M Run/Stop Cable does not power the Nucleus-M focus motor.