Install one HDMI or USB terminal in your wall neatly with the white TechLogix Networx Single-Port Blank Wall Plate. It enables snap-in installation of MOFO PT series HDMI or USB cables and terminals to provide a quick and easy installation.

Supports MOFO PT Series In-Wall Cables

Related Questions and Answers

Q: 1. Will the Leica 46mm lens cap fit flush (are the diameters same size) with a Hoya 46mm filter?

A: Yes a 46mm filter will fit any 46mm lens cap such as the Leica 46mm Snap-OnLens Cap.

Q: 2. What remote is used? We have a corded version and I would like to make it wireless.

A: It only works in conjunction with the CamRanger and the CamRanger app on a smartphone or tablet. You would need to purchase the CamRanger and download the app on a compatible device.

Q: 3. Does PT-MZ880 8000-Lumen WUXGA 3LCD Projector (Black) have onboard wifi?

A: The Panasonic PT-MZ880 8000-Lumen WUXGA 3LCD Projector (Black), B&H # PAPTMZ880BU7, does not feature onboard Wi-Fi capability. Two RJ45 Ethernet ports provide LAN and HDBaseT support and connectivity.

Q: 4. what are the specifications?

A: The Panasonic PT-VMZ71U7 7000-Lumen WUXGA Laser LCD Projector BH #PAPTVMZ71U7: Specifications: LENS: 1.6x manual zoom (throw ratio: 1.09–1.77:1), manual focus lens, F 1.60–2.12, f 15.30–24.64 mm Resolution: WUXGA (1920 x 1200 pixels) Keystone correction range Vertical: ±25 °, Horizontal: ±35 ° Screen Size (Diagonal) 0.76–7.62 m (30–300 in), 16:10 aspect ratio Contrast Ratio*1 3,000,000:1 (Full On/Full Off) (When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] is set to [1].) Light source Laser diode LCD panel | Panel size 16.3 mm (0.64 in) diagonal (16:10 aspect ratio) LCD panel | Pixels 2,304,000 (1920 x 1200) pixels Projector type LCD projectors Lens shift | Vertical (from center of screen) +44 %, 0 % (manual) Lens shift | Horizontal (from center of screen) +20 %, -20 % (manual) Center-to-corner zone ratio*1 85 % Time until light output declines to 50 %*3 20,000 hours (NORMAL/QUIET)/24,000 hours (ECO) Light Output*1 *2 7,000 lm Terminals | COMPUTER 1 IN D-sub 15-pin (female) x 1 (RGB/YPBPR/YCBCR) Terminals | VARIABLE AUDIO OUT M3 stereo mini-jack x 1 Terminals | SERIAL IN D-sub 9-pin (female) x 1 for computer control (RS-232C compliant) Terminals | DIGITAL LINK/LAN RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], HDCP, Deep Color, 4K/30p*6 signal input) Terminals | LAN RJ-45 x 1 for network control, 10Base-T, 100Base-TX, compatible with PJLink™ [Class 2] Terminals | AUDIO 1/2 IN M3 stereo mini-jack x 2 Terminals | Computer 2 In D-sub 15-pin (female) x 1 (RGB/YPBPR/YCBCR) Dimensions (W x H x D) 399 mm x 115 mm x 348 mm (15 23/32˝ x 4 17/32˝ x 13 11/16˝ ) (not including protruding parts) 399 mm x 133 mm x 348 mm (15 23/32˝ x 5 1/4˝ x 13 11/16˝ ) (with feet at shortest position) Built in speaker 10 W monaural Operating environment Operating temperature: 0–45 °C (32–113 °F)*11,*12 , Operating humidity: 20–80 % (no condensation) Cabinet materials Molded plastic Applicable software Multi Monitoring & Control Software, Logo Transfer Software, Presenter Light Software for Windows®*13, Wireless Projector App for iOS/Android™*14 Note Note: Availability varies by country or region. *1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped. *2 When [PICTURE MODE] is set to [DYNAMIC], [LIGHT POWER] is set to [NORMAL], [DAYLIGHT VIEW] is set to [OFF], and [AUTO POWER SAVE] is set to [OFF]. *3 Around this time, light output will have decreased to approximately 50 % of its original level ([PICTURE MODE]: [DYNAMIC], [DYNAMIC CONTRAST] set to [2], temperature 30 °C (86 °F), elevation 700 m (2,297 ft) with 0.15 mg/m3 of particulate matter). Estimated time until light output declines to 50 % varies depending on environment. *4 Resolution decreases when using this function. 6-Point Screen Correction, V/H Keystone Correction, and curved-screen correction are not available when using this function, and range of corner adjustment is limited. *5 When Digital Zoom Extender is set to 80%. *6 4K signals are converted to the projector's resolution upon projection. *7 On standby, power supply is available with Quick Startup set to ON or Power Management set to Ready. *8 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. On-mode power consumption measured at 25 °C (77 °F) operating temperature at an altitude of 700 m (2,297 ft). *9 Filter cleaning cycle varies depending on environment. Filter can be washed and reused up to two times. Filter cleaning cycle: 20,000 hours (under dust conditions of 0.08 mg/m3 ), 10,000 hours (under dust conditions of 0.15 mg/m3 ). *10 Average value. May differ depending on the actual unit. *11 Light output is limited at operating temperatures higher than 30 °C (86 °F), and projectors cannot be operated at altitudes higher than 2,700 m (8,858 ft) above sea level. *12 When optional AJ-WM50 Series wireless module is attached, operating temperature range becomes 0–40 °C (32–104 °F). *13 When using Presenter Light Software, images are projected with 1280 x 800 dots or 1024 x 768 dots onto the screen. Also, your PC display resolution may be forcibly changed, and audio playback disrupted or become noisy, while images and sound are being transmitted. *14 When using the Wireless Projector app, display resolution differs depending on your iOS/Android™ device and the display device. The maximum supported display resolution is WXGA (1280 x 800) Power supply AC 100 V–240 V, 50/60 Hz Operation noise*1 38 dB (NORMAL/ECO), 28 dB (QUIET) Terminals | USB(VIEWER/WIRELESS/DC OUT) USB connector (Type A) x 1 for Memory Viewer function, optional AJ-WM50 Series Wireless Module, power supply (DC 5 V, maximum 2 A*7 ) Terminals | HDMI 1/2 IN HDMI 19-pin x 2 (Compatible with HDCP, Deep Color, 4K/30p6 signal input), CEC supported Filter*9 Included (Estimated maintenance time: approx. 20,000 hours) Weight with supplied lens*10 Approx. 7.0 kg (15.43 lbs) Digital Zoom Extender *4 Throw ratio 1.09–2.21:15 (Corresponding value. When used together with optical zoom.) Power consumption*8 | Maximum power consumption 420 W (4.5–1.9 A) (455 VA) (Power consumption is 410 W at 200–240 V) Power consumption*8 | On-mode power consumption (Light Power)[Normal] 390 W (100–120 V), 375 W (200–240 V) Power consumption*8 | On-mode power consumption (Light Power)[Eco] 275 W (100–120 V), 265 W (200–240 V) Power consumption*8 | On-mode power consumption (Light Power)[Quiet] 270 W (100–120 V), 260 W (200–240 V)

Q: 5. what is the difference between this model PT-MZ880BU and the PT-MZ880BU7?

A: There are no differences at all. The Panasonic PT-MZ880BU7 8000-Lumen WUXGA Laser 3LCD Projector (Black) BH #PAPTMZ880BU7 • MFR #PT-MZ880BU7 is now discontinued.

Q: 6. Will the CamRanger PT Hub Wireless Receiver and MP-101 Head work with any video camera or does it still require specific DSLR cameras?

A: This device will still only work with CamRanger compatible cameras.

Q: 7. Does this project over SDI input?

A: The Panasonic PT-MZ880BU projector does not offer any SDI inputs.

Q: 8. I bought the MP-360 motorized head. I want to use it with a Panasonic GH4 at the top of a 24' tripod.I understand that the CamRanger does not provide support for the GH4, but once I buy the PT Hub Wireless Receiver, in theory I should be able to use the CamRanger iPhone app to control the motorized head, and a separate app (I already have) to control the GH4. Is this correct? Does anyone see any problems with my understanding of how this setup will work?Thanks in advance!

A: Scott, I am not sure about what you want to do? I would think that you could control the MP-360 head with the PT Hub via the iPhone, but you would not have control over the camera. But you can control the MP-360 head with the wired remote. That way you would not need the CamRanger. Sorry that is the best I can do.

Q: 9. Any rainbow effect here? 3LCD should prevent that. Please confirm this is 3LCD.

A: The Panasonic PT-MZ880 8000-Lumen WUXGA 3LCD Projector (Black) BH #PAPTMZ880BU7 is a 3 LCD projector: 0.76" 3LCD Chips.

Q: 10. Is this projector definitely compatible with the Gabor 360° Universal Projector Mount (White) BH #GAUPM360W?

A: The Panasonic PT-VMW61 6200-Lumen WXGA Laser 3LCD Projector (White), BH # PAPTVMW61U7, works with the Gabor 360° Universal Projector Mount (White), BH # GAUPM360W.