The 100 x 150mm K-Series Graduated ND Balancer Filter with Quick Release Magnetic Filter Frame from H&Y Filters can be used to darken the sky by 4-stops while allowing for a normal, unaffected exposure in the foreground the image.

This filter is constructed of durable Gorilla Glass and is multicoated for high color and light transmission. The filter also incorporates a resistance coating for protection from abrasions and scratches, and to repel water and oil for easy cleaning. The included magnetic frame attaches to the H&Y 100mm Magnetic Filter holder in seconds and can be repositioned quickly.

1.2 Optical Density    9-Layer Multicoating, Gorilla Glass    For 100mm K-Series Filter Holder    Effect Spread across Selective Areas    Reduce Exposure for Saturated Skies    Quick Release Magnetic Filter Frame    Magnetically Mounts on Holder    Fast Use of Filter on Holder    Microfiber Cleaning Cloth, Filter Pouch

• 1.2-stop band of density across filter that extends toward the top and bottom of the filter before tapering to clear areas that extend until they meet the top and bottom edges of the filter
• Creates a neutral density pattern that corresponds to the positioning of the sun when it is at, or immediately above, the horizon
• Density pattern to match the brightness pattern of the sun when it appears at or is close to the horizon as opposed to a higher angle, which creates an increase in brightness that is much more prominent on both sides of the sun than either above or below it
• Filter does not affect coloration of the image and is ideal for use with other filters
• Each glass surface includes eight layers of anti-reflection coatings to prevent internal ghosting and reflections as well as an anti-smear nano coating for an improved beading effect when in contact with water or oil for greater cleaning efficiency
• Constructed from Gorilla glass for enhanced scratch resistance
• Filter pouch for storage and transport, as well as a microfiber cleaning cloth for filter maintenance

• Pre-installed along the edges of the included 100 x 150mm center graduated neutral density filter for use within an H&Y Filters 100mm K-Series Filter Holder that is configured with a pair of magnetic filter slots
• Allows 100 x 150mm center graduated neutral density filters to be magnetically stacked in front of a camera lens along with other filters that have a Quick Release Magnetic Filter Frame installed, instead of inserted only within one of a specific number of filter holder slots
• Helps allow the user to determine the number of filters to be applied when using a 100mm K-Series Filter Holder, all of which can be quickly installed, repositioned, or switched with a different filter needed for other subjects or changing lighting conditions
• Reinforces the edges of the 100 x 150mm center graduated neutral density filter, enhancing that filter's rigidity and promoting sharp results by helping to ensure that the filter remains flat
• Front-facing center finder rulers on side sections of this Quick Release Magnetic Filter Frame help enable precise positioning of the 100 x 150mm center graduated neutral density filter relative to another filter it is stacked on, further complementing the use of the 100 x 150mm center graduated neutral density filter whose effect can be adjusted to better suit changing lighting conditions or creative demands by moving it up or down

Related Questions and Answers

Q: 1. I have the oben GH800 and the supplied plate won't stay tight. Will this work with my canon 100-400 foot ? I'm not sure what the 2 screws are for. Does one go to the camera and the other to the foot of the Lens?

A: This arca plate would be too long for the Canon 100-400 4.5-5.6 IS II lens. For that lens I recommend this Wimberely P10 plate. It has a lip in the front of the plate that will hold the lens from twisting in the plate. Plates come with multiple screws because some lenses accept more than one screw on the bottom of the lens. https://www.bhphotovideo.com/c/product/205333-REG/Wimberley_P_10_P10_Quick_Release_Plate.html

Q: 2. Can I use 95mm filtering?

A: No, you cannot use 95mm filters with this. It is only for 100x100mm and 100x150mm filters.

Q: 3. Can I keep one of these on all the time while im walking around outside? Id rather not keep taking it when i power off the osmo

A: Yes, you can keep one of the filters in the DJI Magnetic ND Filters Set for Osmo Pocket 3 on the camera while it's powered off.

Q: 4. Hi B&H, have you tested this with the sony 16-35 GM and the Nikon S 14-30 for vignetting?

A: We have not tested it with the Nikon 14-30mm lens but it does not vignette the Sony 16-35 f2.8.

Q: 5. How much does this restrict the Canon 24 TSE as far as shifts using the polarizer?

A: This does not limit the lens from how far it can shift or tilt.

Q: 6. is there a way to use a 82mm circular polarizer for my 17mm ts with this ring?

A: No, there is not. The Vu Filters 150mm Professional Filter Holder Lens Ring for Canon TS-E 17mm f/4L Lens is designed for use with the Vu Filters 150mm Professional Filter Holder, which is designed for use with 150mm-wide square or rectangular filters. There is no adapter ring to connect the smaller 82mm circular filter onto/into the Vu Filters 150mm Professional Filter Holder.

Q: 7. The specs state the length as 150mm, what is the width and height?

A: The width would be 60mm, however a height measurement is not published.

Q: 8. Does it fit for Nikon Z 14-24 lens?

A: Unfortunately, this holder kit does not work with the Nikon Z 14-24mm lens. A compatible holder is the NiSi 100mm Filter Holder for Nikon Z 14-24mm f/2.8 S Lens, BH # NIP100NZ1424 https://bhpho.to/3oIDDhM

Q: 9. Is this the right plate for a Tamron 150-600?

A: The removable rotating tripod collar included with the Tamron SP 150-600mm f/5-6.3 Di VC USD G2 Lens features an Arca-type compatible foot. So, no plate is necessary to mount the lens on an Arca-type compatible tripod head.

Q: 10. Is there any kind of adapter that will allow me to use standard 67mm threaded filters with this attachment?

A: This is an adapter that allows you to use standard 67mm filters.