This 46-62mm Magnetic Clip-On Filter for RevoRing from H&Y is compatible with select 46-62mm RevoRing filters to reduce exposure by 4-stops for finer image control. The added density can be used to increase shutter speed for increased image blur, like smoothing out water surfaces or to emphasize motion. It can also be used to narrow depth of field and increase background bokeh to better isolate the subject of an image. In addition, it can help avoid the phenomenon of the "X-pattern" that can form when using a variable neutral density filter on a wide-angle lens. By adding density to increase the aperture opening, the X-pattern on the image can be reduced or eliminated.

This neutral density filter is made of 2mm-thick optical glass with multicoating for optimal light transmission, and resistance coating to repel fingerprints, oil, and water for easily cleaning. The magnetic frame attaches easily to the RevoRing, and multiple filters may be stacked for greater effect.

1.2 Optical Density    Double Sided 9-Layer Multicoating    Water-Repellent Resistance Coating    2mm Thick Optical Glass    Fits Select 46-62mm RevoRing Products    Darkens Entire Image Area    Allows Reduced Shutter Speed    Allows Wider Aperture    Magnetic Frame

• Long exposure adds movement in an image
• Finer control over depth of field
• Reduces "X-pattern" effect of Variable ND filters on wide-angle lenses
• Reduce brightness in overexposed scenes
• 2mm thick optical glass
• Magnetic frame for use with RevoRing products
• Double-sided 9 layer multicoating
• Anti-fingerprint and water-repellent resistance coating
• Multiple Clip-on filters can be stacked for increased effect
• Compatible with still or video cameras

• RevoRing with CPL
• RevoRing with Variable Neutral Density & CPL
• RevoRing with Black Mist Filter
• Other RevoRing products without a non-detachable filter

Related Questions and Answers

Q: 1. Does this hood rotate clockwise / counterclockwise, or is there some level of resistance or locking to prevent unwanted spinning out of normal position?

A: The Sensei 62mm Quick Clip Lens Hood is a non dedicated lens hood. It screws on like a filter and unlike dedicated hoods it does not lock into position.

Q: 2. Anyone tried this 52-72mm Revoring together with the new Sony 16-35mm G PZ lens? Is there any vignetting?

A: The H&Y Filters RevoRing 52-72mm Variable Adapter for 77mm Filters has not been tested with the Sony 16-35mm G PZ lens. Chances are you might get some vignette at 16mm depending on the filter. Best would be use use the next size up on the H&Y that uses 82mm size filters, https://bhpho.to/3SnYDu1

Q: 3. Conflicting information. Product Description claims that you can reverse the hood bu the reviewer says that that it doesn't? Also, The product description claims that you can use a 62mm filter (on a 62mm Lens hood) but a reviewer states that it takes a bigger filter? What is the correct statement in both Cases?

A: I had to use this lens hood on my Sony Rx10 II because Sony doesn't sell replacement hoods(!). This hood easily reverses and I can use a 62mm protective filter with the hood in place. If one were to use a 62mm circular polarizer or ND fader, it is very difficult to rotate the filter since the filter threads are recessed deeply into the hood mount. This is the case with my thin Cokin Harmonie circular polarizer. It is probably easier to use a thicker circular polarizer with this hood mount.

Q: 4. Will this fit on Lensbaby Velvet 56mm f/1.6 lense? I have a 65mm UV filter on.

A: The Sensei 62mm Quick Clip Lens Hood is not compatible with a 65mm filter.

Q: 5. I have several 77mm Nikon lens and several Variable ND filters (77mm). Could I use this adapter for these lens and filters?

A: If the lens filter threads on the lenses are between 67-82mm in size (such as your 77mm variable ND filters) and the Nikon lens you currently own has 82mm filter threads, then yes, the H&Y Filters RevoRing 67-82mm Variable Adapter for 82mm Filters would work for your usage needs. As the variable adapter can change thread sizes for the filters used with the adapter, you may use multiple filters from 67mm to 82mm with this adapter, saving you from having to purchase multiple step-up rings and step-down rings.

Q: 6. Will these work with a filter holder like a Nisi V6 or V7? That is, can I use the 82mm adapter to put the Nisi holder on a range of lenses?

A: The H&Y Filters RevoRing Variable Adapter Bundle (3 Adapters) are compatible with screw-in filters only.

Q: 7. Does the revoring work with the sigma 24-70 art lens?

A: Yes. The RevoRing 67-82mm variable adapter will work with Sigma 24-70mm f/2.8 Art lenses as they are 82mm front diameter lenses. However, according to some tests, there could be vignetting at the wide-end of the lens. Your results may vary.

Q: 8. Does this hood fit the Panasonic Leica 12-60mm f2.8-4?

A: Yes this Sensei 62mm Quick Clip Lens Hood will fit on the Panasonic Leica 12-60mm f2.8-4 lens.

Q: 9. most my lens are between 52-72mm but my filter is an 82 mm could i buy the revo 77mm so it fits my lenses then get a 77-82 step up to attach the filter to the revoring?

A: Yes, you could use an 82mm filter with the H&Y Filters RevoRing 52-72mm Variable Adapter for 77mm Filters by using a 77-82mm step up ring?

Q: 10. will these work with the smallrig mini mattebox?

A: The SmallRig Mini Matte Box comes with 67mm, 72mm, 77mm, and an 82mm Adapter Ring. You will need to use one of those depending on the lens. And then you can use most any other step-up ring to that.