Direct and control the image quality of your next film or broadcast production with the 23.8" Quad-Link 4K Production Monitor from SWIT, thanks to its 1920 x 1080 QLED panel display with video assist and multiview functions. The screen has a 178° viewing angle, a 1000:1 contrast ratio, and 400 cd/m² of brightness. An HDMI 2.0 input and SDI inputs and outputs can support up to 4K video in pixel-to-pixel zoom, single-link, quad-link, and mixed-input multiview. One input source can be copied to four windows to display different HDR/SDR and color gamuts simultaneously for easy comparison.

Payload ID identifies the input video's HDR/SDR EOTFs, color gamut, input range, color space, and color depth automatically. The monitor supports the upload of 3D LUTs via a USB Type-A port for consistent color correction. Other video assist functions like focus assist, vectors, and eye pattern increase the efficiency of your image quality observation. Control over the monitor can be achieved via the RS-485 input with IP control or using the front-panel buttons. Both AC and DC inputs or the included V-mount battery plate can provide power to the device. An included power cable and monitor stand make setup on your next soundstage quick and efficient.

23.8", 1920 x 1080 QLED Display    Quad-Link, Single-Link, Multiview    SDI and HDMI Inputs    Supports up to UHD 4K Resolutions    178° Viewing Angle, 1000:1 Contrast    400 cd/m² Brightness    Supports HDR and 3D LUTs    Multiple Video Assist Functions    Control via RS-485    V-Mount Battery Plate

Related Questions and Answers

Q: 1. Is this monitor's color reproduction good enough to grade on?

A: This monitor is not designed for color grading thus it is missing some important features such as native colorimeter support for color calibration. It is also worth noting that it is not bright enough for HDR color grading. We recommend considering monitors designed for color grading to get the best experience.

Q: 2. Does this monitor support LUTs (look up tables)? Can you install a VESA mount without removing the V-mount battery holder?

A: This monitor does not offer support of LUTs. Also the V-mount plate is in the way of the VESA mounts. It would need to be removed.

Q: 3. Can the monitor do one full screen with one HDMI input?

A: Yes, the monitor can do one full screen with one HDMI input.

Q: 4. Is it possible to have or extend warranty to 3 years?

A: When you place this in your cart, you are presented with 2 and 3 year plans offerings from Allstate for your consideration.

Q: 5. I purchased the FeelWorld 4k Monitor along with an ATEM Mini Pro. But, I cannot use the monitor with the ATEM switcher. When I plug cameras into the monitor (via HDMI in) and then use the HDMI out to plug it into the ATEM Mini - I do not see the video feed in my streaming software (OBS). When I plug the camera directly into the ATEM Mini Pro - it shows up in OBS. Can you provide any guidance on fixing this issue?

A: The FeelWorld 15.6" 4K IPS Broadcast Director Monitor (B&H# FE4K1569HSD3) does not have an HDMI out port. The four HDMI ports on this product are HDMI In ports only.

Q: 6. Can the monitor do one full screen?

A: Yes, the Feelworld 15.6" Monitor can output one full screen feed.

Q: 7. Can the screen markers be changed to a 1:1?

A: no it can not

Q: 8. Does it have a waveform ? Only one SDI input ?

A: This product does not offer waveform. This product offers a single 3G-SDI input and output.

Q: 9. Is everything needed to calibrate, built in to the monitor?

A: The SmallHD OLED 27" 4K Production and Grading Monitor does not have the ability to self-calibrate the display, so calibration tools must be purchased. The tools required are: Colorimetry Research CR-250-RH Spectroradiometer / Spectrophotometer B&H # COCR250RH • MFR # CR-250-RH Colorimetry Research CR-100 Tristimulus Colorimeter/Photometer B&H # COCR100 • MFR # CR-100 Portrait Displays Calman Studio Calibration Software (Download) B&H # POCALMANSTD • MFR # SFTSTDO AVMATRIX 12G-SDI & 4K HDMI 2.0 Pattern Generator B&H # AVPG4K • MFR # PG4K

Q: 10. do you know if the inputs can be duplicated ? to fill out the quad view if you only have 2x-3x cameras (as in Smallhd monitors)

A: No, the SWIT 21.5" 1000nits 12G-SDI HDR QD-LED Field Monitor does not support the duplication of input signals. However, you could achieve a duplicated spit layout using the SWIT 21.5" 1000nits 12G-SDI HDR QD-LED Field Monitor and a 1x4 SDI signal spitter, such as the BZBGEAR 12G-SDI 1x4 Splitter/Distribution Amplifier (BH #BZGDA12GS1X4).