Ethernet Cable Continuity Tester

Rapcohorizon Bctblox Beeper / Continuity Tester

Product Code: ga10833
Availability: In Stock

$175.50 $257.99

Qty

4 reviews Write a review

Description
Reviews (4)

The BCTBLOX Beeper / Continuity Tester from RapcoHorizon is a self-contained continuity tester that features an LED on the front. When the light is On, it indicates that the circuit is complete, and when its Off it indicates an open circuit.

Parameters
Connectors	2 x 1581-0 Black single banana jack
Indicator Lights	1 x Red LED
Dimensions	Approximately 3.50 x 1.25 x 1.00" (88.90 x 31.75 x 25.40 mm)
Packaging Info
Package Weight	0.3 lb
Box Dimensions (LxWxH)	8 x 2.7 x 1.6"

Self-contained continuity tester via an LED on the front

Light On indicates circuit complete

Light Off indicates an open circuit

Probes included

Easily fits into your toolbox or even a shirt pocket

Black powder-coated aluminum chassis

Hand soldered connectors

Related Questions and Answers

Q: 1. is this cable tester made in China ?

A: The Country Of Origin is CHINA(Subject to change)

Q: 2. Will this test active HDMI cables, that is, cables with Redmere technology?

A: Thank you for your question. This unit will test all HDMI 2.0 cables.

Q: 3. does this tester put the batterie under a load?

A: Yes, it puts the battery under a light load.

Q: 4. Hoping to verify that the jack on the side is for accepting 1/4 (6.35 mm) . It doesn't actually say it in the specs.

A: I can confirm the Kopul CBT-8 8-in-1 Cable Tester can accept 1/4" TRS/TS connections to test continuity.

Q: 5. Can this test cables with different connectors on each end? For example, XLR on one end and 1/4 TRS on the other end.

A: Yes, it can.

Q: 6. Will it show Volts Amps and Watts for a Passive POE Injector ?

A: Yes, the Triplett POE2000 PoE Tester Pro displays volts, amps, and watts of PoE signals.

Q: 7. Can you test a cable with different connectors in the same cable for example: XLR to 1/8, XLR to 1/4?

A: Yes. The Mackie MTest-1 detects which inputs you are using and matches the pins to be able to test cables with different connectors on each end.

Q: 8. Does this tester tell you the percentage of charge left OR how much capacity or life is left in the battery before it stops working and you have to buy new ones?

A: This tester has 5 LED to show battery capacity left in 20% increments.

Q: 9. Is this made in usa?

A: Yes, this is made in the USA.

Q: 10. Some speaker cables have a banana plug on one end and a TS connector on the other. Are the banana connections on this tester able to accept this type of connector so you can test this type of speaker cable?

A: The banana plug inputs on the unit are specifically made to connect the included probes, which can then be used to test continuity with any type of cable connector.

Nic	24/09/2024
Wanted to leave a review to counter the negative one because clearly there is a misunderstanding. This is an excellent tool to check a dmx ports universe without bothering the programmer. That said, it requires the programmer to use a method at the console level to identify universes. Any programmer working in Film should know and should be using this method. It is too easy to setup, and too helpful to SLTs not too. This tester and another competitor version we're both a response to finding a smaller battery operated tester that could take advantage of this method. For that it does the job well. If anyone is unaware of this method of universe identifiers... The idea is to PARK the 512th DMX slot at the level corresponding with its universe. So the dmx testers only job is to read the level of the 512th channel. (Though is has ability to read any ch if you prefer) So.... Universe 1: 512 is @ 001 Universe 2: 512 is @ 002 The only caveat for programmers is to choose whether to input that level in 0-100 or 0-255 format and match that setting to your tester. 0-255 is best, more accurate more possible universes. 5