The sturdy RTH-1030 Triple Action Ball Head from Robus is a rugged, full-featured ball head that provides a combination of strength and functionality for use in the studio or on location. With a generous load capacity of up to 35 pounds, the RTH-1030 can support cameras up to full-sized DSLRs with massive telephoto lenses and still provide a full range of movements. The main locking knob turns easily to tighten and loosen the ball, and features an ergonomic and intuitive tension adjustment dial. Adjustable tension control ensures that a level friction is always applied to the ball to prevent losing control of the camera when repositioning. The Arca-type quick release receiver incorporates an integrated bubble level for precise horizontal alignment and is compatible with a multitude of Arca-type quick release plates, camera brackets, and other related accessories.

Load Capacity: 35 lb    Height: 3.9"    Weight: 14.1 oz    Arca-Type Compatible Quick Release Clamp    Includes Quick Release Plate    360° Pan with Independent Pan Lock    Tension Control    Lateral Tilt: -45 to +45°    Integrated Bubble Level    Portrait Angle Selector

The generous 35 lb load capacity of the RTH-1030 enables the smooth positioning of almost any type of camera, ranging from simple compact models up to heavy camera-plus-lens combinations, with stable and secure results.

The locking knob includes an integrated tension dial that sets the minimum amount of friction on the ball. This ensures there's friction, even when the main locking knob is disengaged. This feature assures control of your camera and lens when you need to quickly unlock and reposition the ball head.

The Arca-type compatible quick release plate allows the camera and lens set to be quickly mounted. It incorporates a bubble level for precise horizontal alignment, and a +/- 25mm scale for precise quick release plate positioning. The included AQR-60 quick release plate has a D-ring 1/4"-20" mounting screw, rubber traction strips to prevent camera rotation, and security pins to prevent it from accidentally releasing from the mounting platform while being positioned.

The panning base operates independently from the main tension knob and features its own locking knob. A highly visible precision scale adds simplicity to panoramic imaging and creating repeatable results.

For exceptional strength and stability, the RTH-1030 head is constructed with aircraft-grade aluminum that can stand up to demanding use and travel and perform at the highest level. All of the control knobs are cross-hatch knurled for easy gripping.

The base of the RTH-1030 ball head features an industry-standard 3/8"-16 mounting socket machined from corrosion-resistant brass, making it compatible with virtually any tripod leg set. The socket is made from reinforced brass to resist wear for long life and reliable, secure tightening.

Quickly change the camera orientation from landscape to portrait using the 90° notch.

Related Questions and Answers

Q: 1. Does the B2 traction control have ”clicks?”

A: No " clicks"

Q: 2. What is the diameter of the base?

A: The Robus RTH-1030 Triple Action Ball Head base diameter is 2 in. (5.1 cm).

Q: 3. Will this fit a Nikon D7100?

A: Justin:Unless your cam weighs more than 17.6 lbs (not likely) and DOES NOT have a 1/4 -20 tripod screw hole (also not likely) in the bottom then it'll work.fine. (The screw hole is pretty standard on most (all?) DSLRs and other camera types, too.) What you might want to put on the bottom of your camera is an L-bracket so you can easily attach the cam to the tripod head since the head uses an Arca-type plate. Talk to customer service to get the right bracket for you camera.

Q: 4. Why is this ball head not recommended for use on a monopod?

A: Typically ball heads offer too much motion when unlocked, which can be hard to handle when using a monopod. With only two hands to grip onto the camera or lens; monopod itself; or the head/tension release knob, using a ballhead could make it difficult to secure the lens in the correct position/orientation. Alternatively, using a monopod head limits the motion to a single axis via the primary tension knob, making it easier to adjust for tilt while not giving you any hassle with pan or roll.

Q: 5. want to replace the mounting screw with aOBEN d RING- Oben 1/4 -20 Screw with D-Ring for RP Plates B&H # OBRPS14D MFR # RPS-14DWhen I contacted the agent, he said that it would not fit. This is the same plate used on Mefoto and I was told that MEfoto and Benro are the same. Is this true?

A: The Oben 1/4 -20 Screw with D-Ring for RP Plates B&H # OBRPS14D can work on Induro PU series plates which is the same plate as MeFOTO and Benro. Induro, MeFOTO and Benro are brands under the Mac Group.

Q: 6. would this fit my Manfrotto 055PRO tripod?

A: Yes, the Benro IB2 Triple Action Ball Head can fit the Manfrotto 055PRO tripod legs.

Q: 7. Is the RTH-1050 compatible with the Robus CC-001 Center Column?

A: Yes. The Robus RTH-1050 Triple Action Ball Head is compatible with the Robus CC-001 Center Column for Vantage Series 3 and 5 Carbon Fiber Tripods.

Q: 8. What is the screw size and thread pitch of the ball head female hole ( where you attach the arca clamp)?

A: While Benro indicates the thread size of the screw socket on the base of the Benro B3 Triple Action Ball Head is a 3/8"-16 female-threaded socket, and the thread on the top of the quick release plate is a 1/4-20" male thread, they do not indicate the size of the thread holding the quick release clamp to the ball stem on the ball head.

Q: 9. Does anyone know if my ProMediaGear C60 Arca-Type Quick Release Clamp can be used on this Benro B2 ball head?

A: While it may be possible to mount the ProMediaGear C60 Arca-Type Quick Release Clamp to the Benro B2, it has not been tested to our knowledge.

Q: 10. Is the quick plate of the Benro ball head compatible with a Peak Design Capture clip?

A: It is compatible with the Peak Design Capture Clip.