The Panasonic WX-SE200DN is a Dante-enabled expansion unit for the WX-SR204 and WX-SR204DN receivers (available separately) that adds four additional receiver channels to the unit without the need for any additional antennas. The receiver is designed for use with the WX-ST200 handheld microphone transmitter and the WX-ST400 bodypack transmitter (both available separately), while support for Dante networking allows you to distribute digital audio throughout your entire facility.

The system operates in the 1.9 GHz range, far away from potential Wi-Fi and TV interference, and is designed to provide reliable audio reception with an operating range up to 150'. The receiver is well suited for hybrid in-room/virtual presentations in a wide variety of spaces ranging from small conference rooms to larger event spaces and auditoriums. Connect up to 8 antennas (available separately) using Cat 5 cables and tuck the receiver away in the equipment closet for a neat and tidy setup.

For Classrooms, Conferences, and Events    Adds 4 Receiver Channels Existing System    Requires WX-SR204 or WX-SR204DN    Dante Digital Audio Networking    Use with WX-ST200 Handheld Microphone    Use with WX-ST400 Bodypack Transmitter    No Additional Antennas Required    For Wide Variety of Room Sizes    Up to 150' Range    1-RU Size with Rack Ears Included

• Add up to 4 additional wireless mic channels to an existing 4-channel system without the need to install additional antennas
• Requires WX-SR204 or WX-SR204DN receiver (available separately), connects via RJ45 port
• Dante connectors for digital audio network: 1 primary RJ45 port and 1 secondary RJ45 port
• Easy to set up—no need for planning or allocation of channels
• Supports external audio input and mixing with mic channels
• Secure pairing with Panasonic microphones
• Supports external audio input and mixing with mic channels
• Rack mountable (1-RU size, rack ears included)

Related Questions and Answers

Q: 1. There is basically no rear wall?

A: That is correct. The back of the APC NetShelter WX 6U Single-Hinged Wall-Mount Enclosure is open (no back panel) and the enclosure is designed to be mounted flush against a wall. This design allows you to connect any cables routed through the wall to equipment inside the rack.

Q: 2. What is the power supply voltage?

A: Power voltage/frequency: U.S.A. and Canada models AC 120 V, 60 Hz.

Q: 3. What are the dimensions of the tripod part - Standing height & width and folded dimensions?

A: The folded dimensions of the tripod in the Square Jellyfish Jelly Grip WX Tripod Mount with Tabletop Tripod for Smartphones are 4.5" H x 1" W. The dimensions of the tripod part when it is open are 2" H x 7" W.

Q: 4. What size deadcat would fit over this?

A: We do not have any deadcat-style windshields that are sized to fit a large diaphragm condenser microphone like those that the Lewitt LCT-44-WX Windscreen is designed for. However, we do have the Bubblebee Industries The Piece-A-Fur Wind Protection - Black (B&H # BUBBIPAFBK) which is 14.1 x 4.3" (36 x 11 cm) and can be used to make your own deadcat-style windshield to fit over the LCT-44-WX Windscreen.

Q: 5. Other than the ability to use a charger, what is the difference between the Square Jellyfish Jelly Grip WX mount vs Square Jellyfish Jelly Grip mount? From the pictures on your website, it looks like the Jelly Grip may have more rotation range of motion than the Jelly Grip WX. Is that the case? Any other differences? Thank you!

A: Other than the fact the Square Jellyfish Jelly Grip WX Tripod Mount is compatible for use with the Square Jelly Grip WX 10W Wireless Charger (which we do not carry), the main difference between the Square Jellyfish Jelly Grip WX Tripod Mount and the Square Jellyfish Jelly Grip Tripod Mount for Smartphones is the WX model accepts wider smartphones up to 4 inches (10.16 cm) wide, whereas the Square Jellyfish Jelly Grip Tripod Mount for Smartphones only accepts smartphones up to 3.625" (9.21 cm) wide. Both have 360 degrees of rotation and can tilt forward and backward.

Q: 6. What is the precise table top Which tripod is included? Is it the brand's "micro" tripod or the "long legs" tripod?

A: The Square Jellyfish Jelly Grip WX Tripod Mount with Tabletop Tripod for Smartphones does not come with either of those models. This comes with their Jelly Grip Pro Tripod.

Q: 7. Are these speakers AC wall powered?

A: Yes they are, and not a wall transformer kind, it's a nice straight cord.

Q: 8. Can these be used as front height speakers with a Yamaha RX-A1080 receiver? Currently have a 5.1 setup.

A: No they cannot be used as height speakers.

Q: 9. Does it work with a case?

A: Yes, the Square Jellyfish Jelly Grip WX Tripod Mount with Tabletop Tripod for Smartphones BH #SQJGWXTMPT can hold a smartphone with a case.

Q: 10. What is wx?

A: WX is a wireless charger by Square Jellyfish which is called the WX charger. The Square Jellyfish Jelly Grip WX Tripod Mount with Tabletop Tripod for Smartphones BH #SQJGWXTMPT is compatible with that charger.