The Panasonic WX-SR202 is a rackmount dual-channel digital wireless receiver for use with the WX-ST200 handheld microphone transmitter and the WX-ST400 bodypack transmitter (both available separately). The system operates in the 1.9 GHz range, far away from potential Wi-Fi and TV interference, and is designed to provide reliable audio reception with an operating range up to 150'. The receiver is well suited for hybrid in-room/virtual presentations in a wide variety of spaces, ranging from small conference rooms to larger event spaces and auditoriums. Connect up to 8 antennas (available separately) using Cat 5 cables and tuck the receiver away in the equipment closet for a neat and tidy set up.

For Classrooms, Conferences, and Events    Use with WX-ST200 Handheld Microphone    Use with WX-ST400 Bodypack Transmitter    Two Channels in Single Rackmount Chassis    Connect up to 8 Antennas with Cat5 Cable    For Wide Variety of Room Sizes    Up to 150' Range    1-RU Size with Rack Ears Included

• Two-channel digital wireless receiver
• Easy to set up—no need for planning or allocation of channels
• Secure pairing with Panasonic microphones
• Supports nearly any room size; up to 8 antennas can be connected
• Supports external audio input and mixing with mic channels
• Ethernet networking enables additional configuration from Panasonic setting software and easy integration with third-party control systems (Crestron, Extron & Q-SYS modules available)
• Rack mountable (1-RU size, rack ears included)

Panasonic designed the WX-SR200P 1.9 GHz Digital Wireless Microphone System to focus on presentation applications with a wider frequency range of 100 Hz to 15 kHz than normal conversations (which usually range from 100 Hz to 4 kHz) to deliver crystal clear amplification of low and high pitch sounds. New noise suppression technology enables sound to be reproduced even more clearly.

The wireless receiver and microphone can be paired simply by pushing a button on each device. Once the devices are paired, communication only takes place between the wireless receiver and microphone, eliminating noise between systems and achieving secure communication.

The automatic interference avoidance feature continuously monitors the channels that are used and selects secure channels where noise will not occur. The WX-SA250 Wireless Antenna (available separately) has multiple internal antennas for diversity reception. When multiple wireless antennas are installed, the handover feature automatically selects the audio from the antenna with the strongest reception.

Related Questions and Answers

Q: 1. If I connect this to a MacBook Pro, will I be use my existing Blink system that I use on my iPhone?

A: Yes, I use my Blink500RXUC with my MacBook Pro all the time. All you need to do is pair your transmitters to the Blink500RXUC and you are ready to go.

Q: 2. I currently own a blink 500 dual channel with the RXDi Lightning iOS receiver. Will this work with my new Blink 500 pro. If not, can I purchase the RXDi dongle pre-programmed to work with my NEW Blink 500 Pro?

A: Unfortunately it is a new system, so the older Blink 500 RXDi will not work with the Blink 500 Pro. The new RXDi Pro is set to be released April 1st in kits the Blink 500 Pro B3 and B4, the RXDi Pro by itself will be released most likely early to mid-summer. This is because of manufacturing and material limitations because of Covid. You can use the LC-C35 cable $59 with the Blink 500 Pro kit you already have for full Lightning compatibility with Mono and Stereo, or the SR-C2000 adapter $17 for mono only Lightning compatibility. I hope that helps.

Q: 3. Will it work with third party apps, like streaming apps? Or, is only through the Saramonic app?

A: Yes, the Saramonic Blink 500 ProX B6 Two-Person Digital Wireless Lavalier Microphone System will work with most third party apps that are compatible for use with external microphones.

Q: 4. Can this be used with the new Blink 500 Pro?

A: No. The Blink Pro uses different technology/algorithm.

Q: 5. Does it work on the iPhone 14?

A: Yes, will work with iOS phones or tablets equipped with a Lightning port.

Q: 6. Is this compatible with the first generation of Godox MoveLink TX 2.4G Wireless Microphone Receiver?

A: The Godox MoveLink II Clip-On Wireless Microphone Transmitter is designed for MoveLink II Wireless Systems only, and Godox has not stated that it is compatible with the first generation of receivers.

Q: 7. Will the TX work with a shure SM63 hand held mic or do I need phantom power? Connecting RX to Sony a7c.

A: The Shure SM63 Dynamic Microphone can be connected to the input on the wireless transmitter for the Godox MoveLink II M2 Compact 2-Person Wireless Microphone System. You can use the Kopul LMT100 Low to High Impedance Matching Transformer (B&H # KOLMT100) as an adapter to enable the connection.

Q: 8. How can I adapt Sennheiser lav's MKE40 and MKE2 on the transmitters? It seems they don't connect well.

A: Lavaliers with locking Sennheiser-style 3.5mm connectors should be generally compatible with the Blink 500 ProX B2, but the locking ring cannot lock into place as these transmitters have no locking mechanism. Unfortunately there is no way around this, and although we have tested such connectors and found them to work, there is no way to make them lock into place. It would be more ideal to use a non-locking lavalier, such as BH #ROLAVGO.

Q: 9. So if I own the saramonic receiver with 2 mic set, can I add this receiver to use each mic on a separate channel? For example if I use the saramonic sr-ax100?

A: If you already own a Blink 500 system with one RX500 camera mount receiver, then yes you can add another RX500 receiver and connect two separate lav channels into the SR-AX100. By selecting the stereo output switch on the SR-AR100, you will get two separate channels of audio into the camera.

Q: 10. Does the receiver have a cold shoe for a DSLR or another mounting method?

A: Yes, the belt clip on the receiver for the Saramonic Blink 500 ProX B2 2-Person Digital Camera-Mount Wireless Omni Lavalier Microphone System does include a cold shoe mount for use with DSLR and mirrorless cameras.