The Rugo R1S LED Light from FoxFury is a 5700K daylight-balanced fixture with a CRI of 70 and flexible output features designed to work in a variety of situations and environments such as SAR, drones, and industrial inspection. The light features rugged aluminum and nylon construction, designed with a light head and a quick-swap power pack. It features three selectable modes that enable switching the fixture's beam spread from 25 to 55 to 120°, and its high 700-lumen maximum output can reach up to 100' away.

In addition to changing the beam spread from spot to flood, the fixture incorporates four modes: low, medium, high, and strobe. Two included mounting options allow you to mount this light on virtually any camera or support. The fixture is waterproof and submersible down to 60', so there are no issues when shooting in inclement weather. The quick-swap power pack is a rechargeable lithium-ion battery that will power the light for up to 6.75 hours at low brightness.

ript>

2 x Rugged Rugo R1S LED Lights    Leg Mounting Kit for DJI Phantom 4/4 Pro    70-700 Lumens Reaches up to 100'    5700K Daylight Color Temperature, CRI 70    For SAR, Drone Flight, Inspection Use    Strobe Rate 90 Cycles per Minute    RC Battery Lasts up to 6.75 Hours

• The R1S features 5700K (daylight) output at a maximum of 700 lumens
• Three dimming modes of low, medium, and high
• Strobe output mode
• Rated at underwater depths up to 60'
• Can rapidly go between spot, mid, and flood beam spreads by sliding the tri-lens front from side to side
• The included mounting choices—a 1/4"-20 thread and shoe adapter—can be easily changed without tools
• The power pack provides between 1 and 6 hours of light on a single charge (depending on the brightness setting) 
• Fully recharges via a USB adapter in 2.5 hours
• Power packs can be swapped out in seconds with no tools

• Consumer CE-EMC, CE-LVD, and IPX7
• Fire-resistant; meets NFPA 1971-8.6 (2013) requirements
• Twilight and night drone flying; meets FAA 107 and CAA guidelines

Related Questions and Answers

Q: 1. Does this work for the DJI Ronin M remote as well?

A: Unfortunately no.

Q: 2. Does this work for Mavic 2?

A: Unfortunately the manufacture does not list compatibility. This is designed for use with the Phantom controllers.

Q: 3. What is the widest tablet or phone that can fit in the controller's bracket?

A: The width will not be limited.

Q: 4. Does camera shoot in RAW as well as Jpeg?

A: As Daniel S correctly said, yes it can shoot RAW, jpg, and RAW+jpg.

Q: 5. Will the remote control for a Phantom Pro 4+ V1 work with the V2.0?

A: Unfortunately no. The controller for the Phantom 4 Pro+ V1 will not work for the Phantom 4 Pro+ V2 drone.

Q: 6. Can the Phantom 4 Pro V2 be used with the Litchi App?

A: Litchi is compatible with: Mavic 2 (Zoom/Pro), Mavic (Air/Pro), Phantom 4 (Standard/Advanced/Pro/ProV2), Phantom 3 (Standard/4K/Advanced/Professional), Inspire 1 (X3/Z3/Pro/RAW), Inspire 2 and Spark.

Q: 7. Does this work with Mini 2?

A: The Hoodman Drone Controller Support Belt with DJI Mount Kit will not work for the Mavic Mini 2 controller.

Q: 8. Can the batteries and nd filters from the phantom 4 pro version 1 be used with version 2?

A: Yes. The Batteries and filters of the Phantom 4 pro Version 1 will also work on the phantom 4 pro version 2.

Q: 9. Hi! How I can transmite live broadcast from the P4P V2.0 to other device?

A: A transmitter could be connected to the controller's output port. Accsoon CineEye Wireless Video Transmitter with 5 GHz Wi-Fi for up to 4 Mobile Devices BH #ACCINEEYE: https://bhpho.to/3bDtpdd

Q: 10. Does this come with the 3 axis gimble camera?

A: When you buy a Phantom 4 Pro+ the Gimbal and camera are built in. The Phantom 4 Pro+ Version 2 features a 3-axis-stabilized gimbal camera with a 20MP 1" CMOS sensor capable of shooting up to 4K60 fps video and photo bursts at up to 14 fps.