This black, 10' RG8X Low-Loss Coaxial Antenna Cable from RF Venue is a 50-ohm cable that features BNC connectors and offers a cost effective, reliable interconnect. The cable is constructed with a double-shielded braid over foil to provide the right balance between loss and flexibility.

BNC Connectors    50-Ohm Cable

Related Questions and Answers

Q: 1. Can I use this with Lectrosonics systems and if so, how do I hook it up to my transmitter/receiver/mixer?

A: Yes, the RF Venue Diversity Fin Antenna with Stand Mount for Wireless Microphone Systems is compatible for use with Lectrosonics wireless receivers operating within the 470-608MHz range. The Diversity Fin has two BNC connections onboard for connecting to corresponding receiver antenna outputs. If you are using multiple receivers, you can connect them all to a single diversity fin using an antenna distribution system. BH #RFDFINDISTRO RF Venue 4-Channel Antenna Distributor with Cloth-Covered Diversity Fin Antenna and Cables Bundle is a good option for this scenario: https://bhpho.to/34K2Fcy

Q: 2. Can it provide power for any passive antenna?

A: The Electro-Voice RFAMP Active RF Antenna Booster (470 to 960 MHz) is designed for use mainly with the Electro Voice RE3 UHF wireless microphone system. However, it could be used with other wireless systems' antennas.

Q: 3. What are the dimensions?

A: This is a single space rack unit that measures 480 x 45 x 250 mm.

Q: 4. Why does it not have a gain switch to account for the signal loss within the BNC cable?

A: The RF Venue Diversity Fin Antenna with Stand Mount for Wireless Microphone Systems (Black, 470 to 698 MHz) does not include a gain feature as it is a passive antenna. Active antennas can pose risks such as overloading the RF front end of a receiver system, and you can easily overload by using an active antenna’s gain control at a setting that is disproportionally strong for the cable run’s length. A good practice would be to implement passive antennas, and then only add in-line amplifiers to make up for transmission line loss if doing very long cable runs of more than 100 feet.

Q: 5. Do you need to buy 2 of these or will 1 work? How many wireless receivers will 1 antenna supply RF for?

A: There are two antennae (omni and directional) in the RF Venue Diversity Fin Antenna with Stand Mount for Wireless Microphone Systems, with two BNC output connections, so a single unit will serve the function of two antennae. The number of receivers relies on implementing an appropriate antenna distribution system and is usually between 1-8 receivers.

Q: 6. Does this unit come with the RG8 cables and power breakout connector like the bundle with the DFin?

A: The RF Venue Distro9 HDR Multi-Zone Antenna Distribution System does not ship with the RG8 cables and the power breakout connector; the only cable included with the unit is the standard IEC power cord.

Q: 7. Can this mount on a bag, such as a K-Tek Stingray Jr. X?

A: The RF Venue Diversity Fin has 1/4"-20, 3/8"-16, and 5/8"-27 mounting threads, but it does not have any mechanism for mounting on a bag or flat surface.

Q: 8. Does this Distro4 model feature the cascade ports to daisy chain multiple units together?

A: Yes. You can link up to four units.

Q: 9. Can you combine IEM and IFB RF signals of different output strengths? For instance I have a Lectrosonics M2T that has two output carriers of 50mw each. and a Lectrosonics T4 IFB transmitter that outputs 250mw. Can I combine them all with this to a single antenna?

A: It is possible to use transmitters with different power output levels with the RF Venue COMBINE4 - 4-Channel Antenna Combiner. This combiner is a unity device that does not affect or change the output strength of the transmitters connected. It does, however, have a maximum input level of 100mW and would not be compatible for use with a transmitter pushing 250mW such as the Lectrosonics IFBT4.

Q: 10. SMA or RP-SMA? How long is the cable?

A: This antenna is SMA male connector and it comes with a 10ft. wire.