Extend your headset cable and give yourself more room to move with the 8' 4-Pin Mono Male XLR to 4-Pin Mono Female XLR Extender Cable from Point Source Audio. The cable's male end connects to the CM-i3-4F or CM-i5-4F headset, while the female 4-pin XLR connector is suitable for use with Clear-Com, Riedel, and RAD intercom systems.

For CM-i3-4F and CM-i5-4F Headsets    For Clear-Com, Riedel, and RAD Systems    Extends Cable Length for More Movement

Related Questions and Answers

Q: 1. If you have two sources that don't natively balance the signal, do you need a 318 on both ends for it to be balanced?

A: The Switchcraft 318 doesn't work in reverse, so it can't be used at both ends of a signal.

Q: 2. how do you remove cable from the camera?

A: Simply remove the cable by pulling it, much like removing a plug from a socket.

Q: 3. Is it compatible with Canon EOS-R6?

A: Yes this cable works with the Canon EOS R6.

Q: 4. Does the "Soundcraft EPM6 - 6 " run at 220V? Does this mixer have “AC Input Power = 100 to 240 VAC, 50 / 60 Hz”?

A: Yes, the Soundcraft EPM 6 - 6 Mono + 2 Stereo Audio Console, according to the specifications, is 85-270 V AC, 50/60 Hz universal input.

Q: 5. If I plug a mono source (via TS or TRS) into the left input of a stereo channel, does the balance pot work as a normal pan pot?

A: The Soundcraft EPM 6 - 6 Mono + 2 Stereo Audio Console does not accept stereo signals and exclusively uses balanced inputs which are mono. You will need to use two cables, one for left, one for right, in order to add a stereo source.

Q: 6. Will this work for iPhone 15?

A: Yes, the Saramonic 3.5mm TRS Female to USB Type-C Adapter Cable for Mono/Stereo Audio to Android (3"), B&H # SASRC2003, is compatible with the iPhone 15.

Q: 7. Will this connect my Pocket Wizard PlusX to my Fuji X-t3?

A: Hi Johnn, Yes, that should work fine. You may need to check the menu settings, with some cameras you have to choose the behavior of the sub miniphone port. Please contact PocketWizard at info@pocketwizard.com if you have any setup questions.

Q: 8. I want to run my iPhone to our church sound system. Can I use a lightning to 1/8" adaptor and then the Switchcraft 318 to go to xlr and get a good signal?

A: Yes, the Switchcraft AudioStix Stereo 3.5mm Female to Balanced Mono XLR Male Adapter is a good solution for converting a stereo 3.5mm signal connection from an iPhone to mono XLR output for connection to a sound system.

Q: 9. Can this be used this to connect a microphone to the DJI OSMO Pocket?

A: No, but you can use the Saramonic SR-C2006 which is designed for the DJI Osmo Pocket.

Q: 10. I plug in wireless mics on the line in input, but nothing happens with the faders?

A: There's no reason why the line inputs should not work normally. Try isolating the problem. Make sure nothing is muted, all gain/volume controls are up, and you have a good signal coming into your mixer. Then check to see if all channel line inputs are inop or just that particular channel. If any or all line inputs do not work, do the xlr inputs work? Check to see if you have a signal from the insert. This is pre-fader, so if you do and there is still no output post fader then the problem is somewhere between your gain circuit and and output .