22 Awg Ethernet Cable

American Dj Accu-cable 3-pin Dmx Cable Spool (300')

Product Code: ga10948
Availability: In Stock

$449.97 $620.96

Qty

3 reviews Write a review

Description
Reviews (3)

This 300' spool of American DJ Accu-Cable 3-Pin DMX Cable allows you to make custom control cables for lighting and special effect applications. The cable features 3 pins which can be wired to the three pins of a male and female DMX512 XLR connector to make a DMX cable. The cable is made of 22 AWG stranded (0.15 x 19) tinned copper with polyethylene insulation in a twisted pair with a polyethylene inner jack with 1--% Duofoil coverage and 85% tinned copper braid coverage within a PVC jacket.

For Custom DMX512 Cable Making For Lighting and Special Effects User Assembly Required 22 AWG

Parameters
Pairs	1
Conductors	2
AWG	22
Stranding	0.15 x 19
Conductor Material	TC-tinned copper
Lay Length	2.5"
Direction	Left hand lay
Twisted Pair	4.8 twists per foot
Jacket Material	Inner: Polyethylene
Pair Color Code	Black/white
Outer Shield	Duofoil tape/braid
Shield Material	Layer 1: 100% coverage of Dufoil aluminum foil-polyester tape Layer 2: 85% coverage of Dufoil® TC-Tinned Copper braid, Coverage %: 85 Outer Jacket:
Outer Jacket Material	PVC-polyvinyl chloride
Diameter	Conductor: 0.354" Inner jacket: 0.055" Overall nominal: 0.229"
Operating Temperature	-22 to 167°F (-30 to +75°C)
Minimum Bend Radius	Install: 3.2"
Maximum Tensile Load	72 lb
Nominal Impedance	110 Ohms
Nominal Capacitance	Conductor to conductor at 1,000 Hz: 12.8 pF/foot Conductor to other conductor and shield at 1,000 Hz: 23 pF/foot
Nominal Velocity of Propagation	66%
Delay	1.6 nanoseconds per foot
Resistance	Nominal conductor DC at 20°C: 24 ohms/1000' Nominal outer shield DC at 20°C: 3.4 ohms/1000'
Nominal Attenuation	0.6 (at 1 MHz) dB/100'
Maximum Current	2.1 amps per conductor at 25%deg;C
Overall
Length	300' (91.4 m)
Weight	9.3 lb (4.2 kg)
Packaging Info
Package Weight	8.705 lb
Box Dimensions (LxWxH)	9.85 x 9.7 x 4.15"

Related Questions and Answers

Q: 1. Could this cable be used with the Aputure 120D II, connecting the power unit to the light fixture?

A: Yes. the power connection is 5 pin XLR. XLR cables come in different gauges. The American DJ cable is not a heavy gauge. It might heat up and be inappropriate. Best to go with a heavier guage.

Q: 2. are all 5 of the pins wired?

A: yes all 5 are wired

Q: 3. Is this light suitable for outdoor use? Namely is it sufficiently waterproof to withstand rain?

A: No, the American DJ Pinspot LED Quad DMX is not rated for outside use and can get damaged in rain.

Q: 4. What is the pin-out configuration of this cable? Thank you.

A: ADJ the manufacture does not list the Pin-out on that cable. It is a pretty standard DMX lighting cable adapter, 3 pin female to 5 pin male.

Q: 5. Wire Gauge? AMP current capacity? Shielding type?

A: The following cable is a 24 awg cable which is shielded and can support a current amp capacity of 14.2 amps.

Q: 6. What is all the colors of wire within the cable? Is there a total of 5 wires?

A: American DJ Accu-Cable 5-Conductor DMX Cable Spool (300') BH #AMAC5CDMX300 offers 5 wires (5 conductors). Pair Color Code: Green/Black/Red/White

Q: 7. is this only for 110V or 110/220V?

A: connector is standard 3 prong edison and would require an adapter for 220v

Q: 8. What is the intensity of the light from low to high?

A: 0-800 watts using the dimmer control. So subtle to exceptionally bright. I hope this answers the question?

Q: 9. Is this only for LED lights?

A: The ADJ Stage Pak 1 Controller & Dimmer Pack System can be used for tungsten lamp heads as well as long as they do not exceed the 1800 watt limit on each dimmer pack.

Q: 10. can this be used to control a skypanel from an analog dmx board?

A: This is compatible with DMX capable devices.

Ulises	24/09/2024
Good cable 5

max	16/08/2024
Use on a weekly bases. No problems yet. 5

max	26/06/2024
Using this for a run from the front to back of a movie theatre. Works well and has had no problem with being setup and torn down on a weekly basis. 5