With a guide number of 190', the MS300-V Studio Flash Monolight from Godox is a 5800K flash source that replaces the original 150W halogen lamp model with a 10W LED modeling lamp that draws very little power with great brightness. It features a 0.1 to 1.8 second recycling time with flash durations as short as 1/2000 sec. Power is variable from 1/32 to full power while the 10W LED modeling light is adjustable from 5 to 100%. Triggering options include sync cord, optical, test button, and wireless power control. The MS300-V is ready to run on 110 to 120 VAC mains power. It has a Bowens mount for wide compatibility with optional accessories.

300Ws, 5800K Color Temperature    LED Modeling Lamp, 5-100% Adjustable    0.1 to 1.8 Second Recycling    Flash Duration: 1/2000 to 1/800 Second    1/32 to 1/1 Power Range    Multiple Trigger Modes    Supports Wireless Control    Guide Number: 190'    110-120 VAC    Bowens S Accessory Mount

• Outstanding, stable output for studio work
• Well-suited for portraits and product shots
• Built-in 2.4 GHz wireless system
• Works with optional X1, X2, XT-16, or FT-16 triggers to control power ratio, modeling lamp, buzzer, as well as flash triggering
• LCD screen for onboard control

Related Questions and Answers

Q: 1. Will these work with the Canon 600Ex-Rt speedlites? also, are these wireless?

A: The Godox MS300-V Studio Flash Monolight works with optional X1, X2, XT-16, or FT-16 triggers to control the power ratio, modeling lamp, buzzer, and flash triggering. The best way to make the Canon EX-RT Speedlites wireless would be to use the Godox X2 2.4 GHz TTL Wireless Flash Trigger for Canon. This will sync your speedlites and allow them to be fired alongside or in sync with the Godox MS300-V Studio Flash Monolight.

Q: 2. Is the LED modeling lamp on the MS300-V daylight or tungsten balanced?

A: Thank you for waiting. The MS300-V has a daylight balanced LED modeling lamp.

Q: 3. Do the softboxes come with 2 layers of diffusion or is just one outside layer?

A: Yes, both softboxes in the Godox MS300-V Studio Flash Monolight (3-Light Kit) have an inner baffle and an outer diffusion panel as well.

Q: 4. Is this light set a Browne mount

A: I'm not familiar with Browne mount, but if you mean Bowen mount then -yes, the light and the soft-boxes in this kit are Bowens S Accessory Mount.

Q: 5. Ok, I'm sorry asked my question in a funny way. Let's try again: Is it safe to plug this ms300-v on a 15amps house outlet? Or does it need to be plugged on a 20amps one?

A: You can plug the light into a 110v 15amp which is the average household plug in the US.

Q: 6. Will the Godoy X proC work with these lights

A: Yes, the Godox XProC TTL Wireless Flash Trigger for Canon Cameras will work with the Godox MS300-V Studio Flash Monolight (2-Light Kit).

Q: 7. What is the warranty for this model?

A: The Godox MS300-V Studio Flash Monolight has a Limited 1-Year B&H Warranty.

Q: 8. I cannot figure out how to connect the MS300 to the light stand. The light connection is round. Stand is screw-on adapter.

A: The post on the stand goes into the female receiver on the light. With this light you do not use the screw on the top of the stand. The light just goes on the post over the screw and down onto the larger post.

Q: 9. Will this fire off another strobe flash, rather than using a dedicated trigger?

A: The Godox MS300-V Studio Flash Monolight can set off other flashes if the other flash has an optical slave.

Q: 10. Is the output of LED modeling lamp close enough to the halogen version to mix the two?

A: Yes, the LED modeling lamp in the Godox SK300 II-V would be close in output to its halogen equivalent.