Compatible with EW-DX wireless receivers, the Sennheiser EW-DX TS 5-PIN is a digital wireless tablestand transmitter with a 5-pin XLR input connector designed to accommodate a wide range of Sennheiser gooseneck microphones equipped with a 5-pin XLR output connector.

Ideal for use where wired mics are impractical, this tablestand transmitter is designed for quick setup and tear down, and can be put away on the CHG 2W inductive charging station (available separately) for in-device charging the included BA 40 battery when the transmitter is not in use.

Use with EW-DX Digital Wireless Receiver    For Sennheiser 5-Pin XLR Gooseneck Mics    134 dB of Dynamic Range, 24-Bit Audio    3480 Frequencies on Equidistant Grid    Programmable Mute Button    Secure AES-256 Encryption    Durable Metal Housing    Inductive Charging    11-Hour BA 40 Rechargeable Battery

• The mute button can be configured for Momentary or Push-to-Talk/Push-to-Mute operation, with a bicolor LED indicating the mute status.
• The button can be locked out and overridden from the receiver or a mobile device during a talk.

• The EW-DX TS 5-PIN is equipped with a 5-pin XLR input connector for Sennheiser 5-pin XLR gooseneck mics.
• The transmitter operates up to 11 hours on a fully charged BA 40 lithium-ion rechargeable battery pack (included)—inductive charging with CHG 2W Wireless Power Transmitter (available separately).
• AES 256-bit encryption offers a secure transmission.
• With 134 dB dynamic range on its input, the tablestand transmitter can easily handle loud and soft voices without requiring any gain adjustment.
• The EW-DX system utilizes an equidistant tuning grid that equally spaces 3480 frequencies across its wide 87 MHz bandwidth to prevent disruptive intermodulation issues that occur when multiple transmitters operate in confined spaces.
• The system can be expanded with multiple transmitters and receivers to offer up to 146 channels in equidistant tuning grid mode, and up to 293 channels in Link Density mode.
• The EW-DX TS 5-PIN is backward-compatible with EW-D receivers.

Related Questions and Answers

Q: 1. Can this be bound to EW-DX receivers?

A: Yes, the Sennheiser EW-DP SKP Digital Plug-On Wireless Transmitter/Recorder can be paired with [Sennheiser EW-DX wireless receivers that operate within the same frequency band.

Q: 2. Can multiple transmitters be paired with a single receiver? Similar to the Sony UWP system.

A: No, the EW-DP EK receiver is single-channel only and only one transmitter can be connected at one time.

Q: 3. Are the included 1/4 wave antennas interchangeable between Q- and R-band receivers or are they different?

A: The included antennas are limited to the frequency band of the receiver they come with.

Q: 4. How does it compare to wireless G4 500P?

A: The Sennheiser SKP 500 G4 Pro Wireless Plug-On Transmitter uses analog UHF wireless technology for transmitting audio and has an RF bandwidth of 88 MHz with 3,520 frequencies while the Sennheiser EW-DP SKP Digital Plug-On Wireless Transmitter/Recorder uses digital UHF technology and has an RF bandwidth of 56 MHz with 2, 240 frequencies. The EW-DP SKP also functions as a digital audio recorder.

Q: 5. does the transmitter allow for timecode input?

A: No, the Sennheiser EW-DP SKP Digital Plug-On Wireless Transmitter/Recorder does not allow for timecode input.

Q: 6. In terms of audio quality for streaming (using a Rode Caster Pro II), is it better to use SKP 500 G4 or EW-DP SKP?

A: The Sennheiser EW-DP SKP Digital Plug-On Wireless Transmitter/Recorder and the Sennheiser SKP 500 G4 Pro Wireless Plug-On Transmitter both require their compatible wireless receiver, as well as a microphone, in order to function. Both systems will provide high quality audio when used with the RODE RODECaster Pro II Integrated Audio Production Studio. One system would not necessarily be better than the other.

Q: 7. Can the internal battery be replaced?

A: No the internal battery in this unit can not be replaced, if unit stops charging contact Sennheiser for further instructions.

Q: 8. Will it work with the Sennheiser EK 500 G4 Pro Wireless Camera-Mount Receiver AW+: (470 to 558 MHz)?

A: The Sennheiser EW-DP SKP Digital Plug-On Wireless Transmitter/Recorder (Q1-6: 470 to 526 MHz) will not work with the EK 500 G4 Pro Wireless Camera-Mount Receiver. However, the Sennheiser SKP 500 G4 Pro Wireless Plug-On Transmitter AW+ (BH # SESKP500G4AW) will work.

Q: 9. Is this digital Wireless Transmitter compatible with the Sennheiser analogue system with the same frequency bandwidth?

A: The Sennheiser EW-DP SKP Digital Plug-On Wireless Transmitter/Recorder is not compatible with older analog models of Sennheiser wireless receivers.

Q: 10. What is the max microphone SPL for this recorder?

A: The Sennheiser EW-DP SKP Digital Plug-On Wireless Transmitter/Recorder (Q1-6: 470 to 526 MHz), B&H # SE700080, is not rated for SPL; it works with just about any handheld or shotgun microphone.