Global 1.5 Digital Photo Frame

Global Truss Dt46-150 Truss Segment With 6 Main Cords (4.9')

Product Code: ga109772
Availability: In Stock

$2,460.00 $2,976.60

Qty

8 reviews Write a review

Description
Reviews (8)

The 4.9' DT46-DT46-150 Truss Segment with 6 Main Cords from Global Truss is an item that installers use for stage and theatrical lighting equipment setup.

Stage & Theatrical Lighting Equipment

Parameters
Length	4.9' / 1.5 m
Width	15.8" / 40.1 cm
Thickness	Wall Thickness: 0.1" / 2.5 mm
Diagonal	Diagonal Bracing: 1" / 2.5 cm
Diameter	Outer Diameter Tubing: 2" / 5.8 cm
Color	Silver
Material of Construction	Steel
Dimensions	Not Specified by Manufacturer
Weight	Not Specified by Manufacturer

Related Questions and Answers

Q: 1. How many of these can be attached together at the same time? Length?

A: You can connect three sections before you need additional support.

Q: 2. Will these fit snuggly on a 1 1/2 inch EMT?

A: These clamp will not fit on 1.5 diameter pipe. Our part# MINI 360 1.5 is designed for 1.5 OD pipe

Q: 3. will this quick-release clamp accommodate 1.4" pipe?

A: The clamp is for Global Truss F23 and F24 tubes that are 35mm (1.34 inches) wide.

Q: 4. Does this truss come with couplers?

A: No. Units are sold separately. Global Truss Double Ended Conical Coupler for F23/F24 Series BH #GLCOUPLERF23 • MFR #COUPLER F23 https://bhpho.to/3rcwLNZ

Q: 5. Can this hold a heavy speaker or do you have to attach a truss to it?

A: This stand can be used as a stand alone speaker stand as long the maximum load capacity is not exceeded.

Q: 6. does this truss come with a bag to carry it?

A: A carrying case is not included.

Q: 7. Can this be mount into a Chauvet dj flex stand ?

A: The Global Truss 2" GT-LB132 Round Support Bar can mount to stands that have a 1-3/8" spigot in order to attach the female socket of the GT-LB132 Bar to the stand. The Chauvet DJ FLEXstand Telescoping Floor Stand has an M10 female thread for the top mount, so you need will need a spigot with 1-3/8" (35mm) male and M10 male ends.

Q: 8. so is 35mm (1.34inches) the minimum diameter or the maximum? thanks

A: 35mm is the max diameter.

Q: 9. What are the dimensions of the feet?

A: The bases on this truss kit would measure 1 x 4 feet.

Q: 10. What's the maximum weight this truss can hold with a center load at full 8 foot span?

A: Please contact Global Truss customer support to discuss further.

Robert	21/09/2024
This baby pin is the remedy for mounting anything you don't want to rotate on the pin. The detent for mounting hardware makes it so there is no need to over tighten things to keep them from rotating. 5

Jim	16/09/2024
Gonna use this with my new c-stand. Don't think I could damage this with a jack hammer. 5

Ted	11/09/2024
Used to connect a light to an arm with a grip head. Super durable and probably has more than one use. 5

anyonymous	17/07/2024
Needed to extend some 200w hmi... 5

James	11/07/2024
Not much to say but these are good, solid baby pins. I like the set screw recesses that keep my studio strobes from pivoting from the weight of heavy modifiers. They fit perfectly in my Impact C-Stand booms. 5

Richard	11/07/2024
I'm relatively new at using strobes and I have struggled with positioning modifiers. I do have 10' ceilings but there is a ceiling fan in the way. I have used baby pins with collars with my speed lights and they work great. But this pin doesn't have a collar so I put a relatively large hitch pin (5/32") so I can use it as a drop down pin. The dimples allow the modifier to be positioned at odd angles without slipping. 5

Richard	30/11/-0001
Use in barrel end if C stand arm to attach light heads. They won't slip or twist 5

Norimer	30/11/-0001
The screw notch/dip is great for holding the light from moving. The wind did not move the soft box and very sturdy. I also used a slim shoe lace through the hole at the end and tie it to the arm, just incase the grip gives out have extra protection. 5