Add an ideal lighting kit solution to your drone with the D10 Parrot ANAFI Thermal IR Drone Lighting System from FoxFury. Achieve optimum light placement with the three included 360° rotating D10 fixtures mounted on the featured thermal saddle mount.

The D10 is a multifunction utility light that mounts onto most drones and helmets and offers 200 lumens in continuous high or strobe light modes. Meeting requirements set by the FAA for night flight operation, the D10 provides a 30° beam angle and two miles of visibility to incoming manned aircraft, with the IR model of the light offering infrared, in addition to white LED color temperature.

The rechargeable LiPo battery technology allows for 30 to 80 minutes of operation with recharging time never exceeding the one-hour mark. It can operate in light rainfall, allowing you to safely return your drone to its landing pad in the event of imminent, heavier rainfall. The compact design of these D10 fixtures makes them ideal for lighting areas with very tight spaces.

Meets FAA Night Flight Requirements    200 Lumens, White or Infrared LED Light    High and Strobe Modes    Includes ANAFI Thermal Mount    Rechargeable LiPo Battery    30- to 80-Minute Battery Life    1-Hour Recharge Time    30° Beam Angle

360° swivel lights

Strobe mode meets FAA and global regulations for UAV night flight and anti-collision lighting

Proudly made in the USA

Related Questions and Answers

Q: 1. What is the maximum length of any component? Specifically what are ther required dimensions of a case?

A: We recommend a 5-foot case for the Gator Aluminum Lighting Truss System, which measures approximately 60" at its longest dimension.

Q: 2. Does this UAV have an ADS B receiver? Does the 50mp camera offer f/stop range or only fixed at 1.9? Thanks

A: Yes, the Autel Robotics EVO II Dual 640T Enterprise Bundle V3 Drone with Thermal Imaging features an ADS-B receiver. The camera has a fixed f/1.9 aperture.

Q: 3. In order to purchase clamps, how thick is the pipe?

A: The thickness of this Truss Piping is​ 1.5" inches.

Q: 4. Share HAC zone classification certificate for use in refinery.

A: Pelican has provided a safety specs sheet on their website here. Product page: https://bit.ly/36Q9Kq7 Safety data sheet: https://bit.ly/3glTP62 For more safety information, it would be best to confirm specifications with the manufacturer as these may have changed since publication. https://www.pelican.com/us/en/support/contact-us/

Q: 5. Would it be safe to plug this into a Furman M-8x2 so that this unit could benefit from the M-8x2's power conditioning and surge protection?

A: Yes, it should be safe to connect a Furman D10-PFP to a Furman M-8x2.

Q: 6. What is the resolution of the RGB camera for still photos?

A: The Parrot ANAFI USA RGB camera has a resolution of 320x256.

Q: 7. Does this unit serve as a surge protector as well?

A: The Furman D10-PFP Power Distributor is a power distributor only, and offers no conditioning or surge protection functions. The Furman M-8x2 Merit Series 8 Outlet Power Conditioner & Surge Protector (BH #FUM8X2) is a great option that combines power distribution and conditioning with surge protection.

Q: 8. Are the t-bars and tripods included?

A: This is the complete stands and bar kit.

Q: 9. can you use outside is it wind proof?

A: Unfortunately, this truss system is not wind-proof when used outdoors. One of the best ways to secure this system against wind is to add sandbags to each stand. The Impact Filled Saddle Sandbag (20 lb, Black), B&H # IMSBFB20 would be a great option to consider. https://bhpho.to/3ahwhfT

Q: 10. Who's the manufacturer?

A: The manufacturer of this lighting truss is Gator.