The Indipro Dual V-Mount Adapter Plate with 3-pin XLR connector to locking clamp is designed to power a variety of lighting via the 3-pin XLR connector. This product must be powered with two 14.8 or 26V batteries, as opposed to different voltage batteries at the same time. A 3-pin XLR powered device can be powered using the 3-pin XLR output that is located on the back of the plate. The plate can be easily mounted to any light stand via the industrial locking clamp. This dual plate is hot-swappable, so you can swap in a new battery without having to power down the light.

Use Two V-Mount Batteries    For 14.8 or 26V Batteries    3-Pin XLR Connector, Hot-Swappable    Includes Locking Clamp

Related Questions and Answers

Q: 1. What is the maximum length of XLR cable that can be added?

A: The IndiPRO Tools 12V Power Supply with 4-Pin XLR Connection can be extended up to 25ft before experiencing any potential signal degradation.

Q: 2. Will this charger work with the indipro compact 95wh v mount?

A: Yes. The following charger will work with compact batteries.

Q: 3. This will charge D&O lighting 190Wh ?

A: Yes, this should work with all V-Mount batteries.

Q: 4. what power does the dtap port have? can I connect 12v accessories there while using 26v batteries for example for a alexa35?

A: The D-Tap power on the IndiPRO Tools Dual Battery Adapter Plate with 4-Pin XLR Output & Locking Clamp (V-Mount) is produced by the batteries not the plate. The power question will need to be directed at the battery's manufacturer.

Q: 5. Can I gang two IndiPro batteries (eg Micro series 98's) and power the LS120d-II via the d-tap on the it's controller?

A: Yes you can gang 2 Batteries to power a unit, but If you plan to do it by the D-tap on the battery, it has a 3 amp max output through the D-tap on the battery, But if you do it through a the D-tap on a plate "V mount or Gold mount plate" it would be fine

Q: 6. Hi, I am not sure but with this plate can I power a Zoom H4N through the XLR connector?

A: As it sits this plate will not work. The XLR inputs on the Zoom H4N are for audio only, it does not have an 4-Pin XLR power input. However you could get the Tilta Universal Power Supply System for 15mm Rod Based Systems and add a PowerTap to Mini USB cable to power the H4N.

Q: 7. Can this charge 26V batteries?

A: The IndiPRO Tools V-Mount Dual Battery Charger with XLR Output is not able to charge 26V batteries.

Q: 8. What is the advantage of this 260.00 charger vs the 45.00 IndiPRO Tools D-Tap Pro Battery Charger which can be charged via D-Tap from an AC wall outlet?

A: This will charge at a much faster pace when compared to a basic D-Tap charger such as B&H # INPD1ABG. This is also a dual charger.

Q: 9. Can I charge 150wh gold mount batteries with this charger? I already saw that TITON 150s will not work. Does this charger have the capacity to do ANY 150wh batteries? If so, what brands? Thanks.

A: Most Gold Mount batteries will charge on this unit. In general though Anton Bauer Gold Mount batteries require an Anton Bauer charger, but most other brands should charge just fine.

Q: 10. Will this charge the Switronix Hypercore Slim HC7S ?

A: In order that you get the best performance between battery and charger, we strongly recommend that you keep it all in the family. We therefore suggest for the HC7S that you get the Switronix GP-2LSJ 2-Position Simultaneous Charger. Please see attached. That being said, the HyperCore Slim V-Mount will charge on Sony, IDX, and Switronix V-Mount chargers, and chances are very good it will be fine on the IndiPRO. However, this combination has not been tested by Switronix therefore performance cannot be verified nor guaranteed at this time.