Receive lossless HD video from up to 750' away along line of sight with the Bolt 6 LT 750 3G-SDI/HDMI Wireless Receiver from Teradek. The unit can wirelessly receive up to UHD 4K30 video with 10-bit HDR support, features a bright OLED display, and outputs video via an HDMI or 3G-SDI port. This new line supports the 6 GHz wireless band, which is now freely available. The receiver comes with a V-mount battery plate to power it with a high-capacity battery.

The receiver supports transmissions of up to UHD 4K30 video from a Bolt 6 series transmitter, which can simultaneously transmit to up to six receivers. It features improved metadata, range, and compatibility over its predecessors. The built-in AES-256 encryption and RSA 1024 key pairing protects your video from prying eyes, while noise rejection keeps your video clean no matter how many devices are using the wireless spectrum. The Bolt 6 LT system also supports the transmission of time code and start/stop triggers.

Though it can transmit visually lossless video to any Bolt 4K series receiver with zero delay using the 5 GHz band, it requires a Bolt 6 device to transmit over the 6 GHz band. The receiver also supports a desktop Bolt Manager software application or the Bolt app for iOS or Android that easily connects via Bluetooth, which both provide a spectrum analyzer, channel selection tools, and remote configuration. There are 1/4"-20 and M3 mounting threads to mount your receiver on a variety of monitors or rigs.

Receive Video from up to 750'    Supports New 6 GHz Frequency Band    3G-SDI and HDMI Outputs, Zero Delay    V-Mount Battery Plate    Receive 4K30 Video, 10-Bit 4:2:2    Compatible with all Bolt 4K Transmitters    AES-256 Encryption, 5 x Antennas    Bluetooth Mobile App, Spectrum Analyzer

Compatible with Bolt 6 series devices using the newly available 6 GHz frequency band

Cross-compatible with all Bolt 4K series devices over the 5 GHz signal spectrum

Wirelessly receive up to UHD 4K30 video and output 4K via an HDMI or 1080p via a 3G-SDI output

SDI Eye Pattern Tool to check SDI cable integrity

Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut

Improved "long range" mode

Small and lightweight chassis design

AES-256 encryption and RSA 1024 key pairing support

The receiver features five antennas

Wireless iOS/Android app via Bluetooth features a spectrum analyzer and remote configuration

Power via 2-pin DC input or via the included V-mount battery plate

Related Questions and Answers

Q: 1. Does this receiver come with both plates, male and female?

A: The Teradek Bolt 6 LT HDMI Wireless Receiver (V-Mount) comes with a female V-Mount Battery Plate.

Q: 2. How do you attach a Sony np battery to the Tx and Rx?

A: At the moment there are only two versions available gold and V-mount units. NP-F adapters are not available at the moment.

Q: 3. If the Tx is fed signal via HDMI, will the local BNC loop thru / output transcode that signal lien the older 500 units did?

A: Yes, the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless Transmitter supports HDMI cross conversion. This would allow the HDMI input to output through the 3G-SDI. The Teradek Bolt 6 also would downscale 4k signals from HDMI to HD when outputting via the 3D-SDI.

Q: 4. Can the transmitter be powered from the usb-c port?

A: No, The Teradek Bolt 6 LT can not be powered via USB-C.

Q: 5. Can I use more than one tx / rx pair in the same environment?

A: It should theoretically be possible to use 6 Teradek Bolt 6 LT HDMI 750 Transmitter/Receiver Kits in a single location if you are all using fixed frequencies and there is minimal external interference in the area. The spacing of the equipment will also be incredibly important. With the Bolt 6 you'll want to have at least 10 feet between the transmitter and the receiver, and between other sets. If more receivers are used in a set this will impact the communication even more so. The Bolts operate in the unlicensed 5 GHz spectrum which can be use by other devices like WiFi routers, other wireless transmitting systems, etc. Here is an article that may be helpful: https://support.cs.inc/s/article/Bolt-4k-Best-Practices-for-Interference

Q: 6. Does Bolt 6 HDMI pass start/stop flags of Canon R6 or Red Komodo? (I have tried but I can't get it to work)

A: The Teradek Bolt 6 LT HDMI 750 Transmitter/Receiver Kit is not listed as being able to start/stop camera recording.

Q: 7. What’s comes with the deluxe package ?

A: In the box of the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless RX/TX with Case Deluxe Kit (Gold Mount), you will find the following: Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless RX/TX with Case Deluxe Kit (Gold Mount) Bolt 6 LT 750 3G-SDI/HDMI Transmitter Bolt 6 LT 750 3G-SDI/HDMI Receiver (Gold Mount) 2-Pin to D-Tap Power Cable (18") USB-A 2.0 Male to Micro-USB Male Cable (39") 2 x HDMI Type A Male to HDMI Type A Male Cable (18") 2 x BNC to BNC SDI Cable (10") 2-Pin to 2-Pin Connector for ALEXA (18") AC Adapter with Cable (6') 7 x Antenna 1/4"-20 Light Stand Adapter Shoe Adapter 2 x Screw Wooden Camera Offset Mount Carry Case Limited 1-Year Manufacturer Warranty

Q: 8. Can someone at B&H test to see if this works with the Sony A7s iii? A review said that there is an issue.

A: Yes, the Teradek Bolt 6 LT 750 3G-SDI/HDMI will work with the Sony A7SIII.

Q: 9. If I buy the kit without a V mount plate where can I get it later if I want to? I can't find the same one they use.

A: The Wooden Camera Dual Battery Plate Cradle for Teradek Bolt LT Transmitter (V-Mount) is the respective V-Mount plate for the Teradek Bolt 6 LT HDMI 750 Wireless Receiver.

Q: 10. can the V Mount plate be easily removed for use without it?

A: The V-Mount battery plate can be removed on the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless Receiver (V-Mount).