Transmit and receive lossless 4K video up to 750' along line of sight with the Bolt 6 LT HDMI Wireless Transmitter/Receiver Kit from Teradek. The kit includes a wireless transmitter and receiver that can wirelessly receive up to 4K30 video with 10-bit 4:2:2 HDR support. This new Bolt 6 line supports the 6 GHz wireless band, which is now freely available. The Bolt 6 system is also compatible with all Bolt 4K devices using the 5 GHz wireless band.

The transmitter inputs up to 4K video over HDMI and the receiver outputs video via HDMI. A Gold mount battery plate is included to power the receiver with a professional Gold mount battery. A carry case is included to store and transport the kit.

Transmit Video up to 750' Line-of-Sight    Supports New 6 GHz Frequency Band    HDMI Inputs and Outputs    Gold Mount Battery Plate on Receiver    Transmit up to 4K30 Video    10-Bit 4:2:2 Support, No Delay    Compatible with all Bolt 4K Devices    AES-256 Encryption, 7 x Antennas    Bluetooth Mobile App, Spectrum Analyzer

Compatible with Bolt 6 series devices using the newly available 6 GHz frequency band

Cross-compatible with all Bolt 4K, Bolt 4K LT, and Bolt 4K Monitor Module series devices over the 5 GHz signal spectrum

Input and output up to 4K via HDMI video and transmit up to UHD 4K30 video

Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut

Improved "long range" mode

Small and lightweight chassis design

Transmit to up to six Bolt 4K or Bolt 6 series receivers

AES-256 encryption support

Wireless iOS/Android app via Bluetooth features a spectrum analyzer and remote configuration

Related Questions and Answers

Q: 1. Can this transmit camera control in addition to the video? I have a small hd 702 touch with a red software license for camera control but need to know if this will support it

A: Yes, the Teradek Bolt 6 LT can be combined with SmallHD Smart 7 Monitors and Wireless Camera Control Starter Kits, allowing you to wirelessly control RED, ARRI, and Sony VENICE cameras.

Q: 2. How can this transmitter be mounted to a camera rig?

A: The Teradek Bolt 6 LT 750 Wireless Transmitter has mounting points on the bottom of the transmitter to attach to different points.

Q: 3. Can you use HDMI out and SDI in (or the opposite) at the same time?

A: When using the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless RX/TX Deluxe Kit (V-Mount) the only output for HDMI is on the receiver. Although the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless RX/TX Deluxe Kit (V-Mount) has bidirectional signal, it is limited.

Q: 4. Can the transmitter be powered from the usb-c port?

A: No, The Teradek Bolt 6 LT can not be powered via USB-C.

Q: 5. Does the SDI port support 1080P 59.97 In and Out of the transmitter and receiver?

A: No, the Teradek Bolt 6 LT 750 3G-SDI/HDMI Transmitter/Receiver Kit (B&H # TE102260) does not support 1080p at 59.94 fps. The video format is only available through HDMI, though the 3G-SDI port can support 1080i at 59.94 fps.

Q: 6. Does it come with two power supply units one for the receiver and another for the transmitter?

A: The Teradek Bolt 6 LT HDMI 750 Transmitter/Receiver Kit only comes with one power supply unit included. A compatible power supply would be the Teradek 18W AC Adapter to 2-Pin LEMO (6'), BH #TEBIT056.

Q: 7. Can the receiver accept more than one Tx signal & output those multiple signals at the same time to one monitor?

A: No, the Teradek Bolt 6 LT 750 transmitter (TX) can only send one signal to up to six Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless Receivers (RX).

Q: 8. Can I use more than one tx / rx pair in the same environment?

A: It should theoretically be possible to use 6 Teradek Bolt 6 LT HDMI 750 Transmitter/Receiver Kits in a single location if you are all using fixed frequencies and there is minimal external interference in the area. The spacing of the equipment will also be incredibly important. With the Bolt 6 you'll want to have at least 10 feet between the transmitter and the receiver, and between other sets. If more receivers are used in a set this will impact the communication even more so. The Bolts operate in the unlicensed 5 GHz spectrum which can be use by other devices like WiFi routers, other wireless transmitting systems, etc. Here is an article that may be helpful: https://support.cs.inc/s/article/Bolt-4k-Best-Practices-for-Interference

Q: 9. Does this work with Bolt 1500, Max, and the previous non 6g version?

A: The Teradek Bolt 6 LT 750 3G-SDI/HDMI Transmitter/Receiver Kit can work with older Bolt models like the Bolt 4k (750/1500/MAX). Please review the following chart to see all the supported Bolt models: https://bhpho.to/3yO7bpm.

Q: 10. How many LT 750s can operate in the same area?

A: These are point to point systems and while multiple units may be employed on a single set or location, each transmitter can support up to six receivers.