Receive lossless HD video from up to 1500' away along line of sight with the Bolt 6 LT 1500 50 3G-SDI/HDMI Wireless Receiver from Teradek. The unit can wirelessly receive up to UHD 4K30 video with 10-bit HDR support, features a bright OLED display, and features HDMI and 3G-SDI outputs. With the same form factor as the Bolt 4K LT 1500, this new line supports the 6 GHz wireless band, which is now freely available.

The receiver supports transmissions of up to UHD 4K30 video from any Bolt 6 or Bolt 4K series transmitter, which can simultaneously transmit to up to six receivers and has an improved long-range mode. It features improved metadata, range, and compatibility over its predecessors. The built-in AES-256 encryption and RSA 1024 key pairing protect your video from prying eyes, while noise rejection keeps your video clean no matter how many devices are using the wireless spectrum. The Bolt 6 LT system also supports the transmission of time code and start/stop triggers.

Though it can receive visually lossless video from any Bolt 4K series transmitter with zero delay using the 5 GHz band, it requires a Bolt 6 device to transmit over the 6 GHz band. The receiver also supports a desktop Bolt Manager software application or the Bolt app for iOS or Android that easily connects via Bluetooth, which both provide a spectrum analyzer, channel selection tools, and remote configuration. There are 1/4"-20 and M3 mounting threads to mount your receiver on a variety of monitors or rigs.

Supports New 6 GHz Frequency Band    Receive Video from up to 1500' Away    SDI & HDMI Outputs, Zero Delay    Receive 4K30 Video, 10-Bit 4:2:2    Compatible with all Bolt 4K Transmitters    AES-256 Encryption, 5 x Antennas    Bluetooth Mobile App, Spectrum Analyzer

Compatible with Bolt 6 series devices using the newly available 6 GHz frequency band

Cross-compatible with all Bolt 4K series devices over the 5 GHz signal spectrum

Wirelessly receive up to UHD 4K30 video and output up to UHD 4K30 via an HDMI or up to 1080p60 via 3G-SDI

SDI Eye Pattern Tool to check SDI cable integrity

Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut

Improved "long range" mode

Small and light chassis design

The receiver features five antennas

AES-256 encryption and RSA 1024 key pairing support

Wireless iOS/Android app via Bluetooth features a spectrum analyzer and remote configuration

Related Questions and Answers

Q: 1. Is the HDMI transmitter compatible with the SDI receiver?

A: The Teradek Bolt 6 LT HDMI 750 Wireless Transmitter can transmit visually lossless video to any Bolt 4K series receiver, including the receivers with SDI outputs.

Q: 2. Can you use HDMI out and SDI in (or the opposite) at the same time?

A: When using the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless RX/TX Deluxe Kit (V-Mount) the only output for HDMI is on the receiver. Although the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless RX/TX Deluxe Kit (V-Mount) has bidirectional signal, it is limited.

Q: 3. Does this come with that small array pictured in "in the box"?

A: The Teradek Bolt 6 LT 1500 3G-SDI/HDMI Wireless RX/TX Deluxe Kit (V-Mount) does come with an included Antenna Array.

Q: 4. Is there a PTap port on the Anton Bauer plate to power other accessories?

A: Please note that the Teradek Bolt 6 LT HDMI 750 Wireless Receiver BH #TE102267 does not come with a V-Mount plate. The following Teradek Blot 6 comes with a V-Mount battery plate and one DTap connector on the plate. Teradek Bolt 6 LT HDMI Wireless Receiver (V-Mount) BH #TE102267V

Q: 5. Does Transmitters have a vmount plate? or is this only for the receivers?

A: While the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless RX/TX Deluxe Kit (V-Mount) only has a V-mount plate for the receiver, you could add the Teradek Single-Battery Plate for Bolt (Female, V-Mount), B&H # TE110854, to the transmitter.

Q: 6. I heard there will be a delay from a 4k signal to a 1080 monitor. Is there a way to send a 1080 signal to a monitor?

A: If your camera is set to output a 1080p signal, the Teradek Bolt 6 LT 750 3G-SDI/HDMI Transmitter/Receiver Kit will transmit and receive that same signal.

Q: 7. Can I use more than one tx / rx pair in the same environment?

A: It should theoretically be possible to use 6 Teradek Bolt 6 LT HDMI 750 Transmitter/Receiver Kits in a single location if you are all using fixed frequencies and there is minimal external interference in the area. The spacing of the equipment will also be incredibly important. With the Bolt 6 you'll want to have at least 10 feet between the transmitter and the receiver, and between other sets. If more receivers are used in a set this will impact the communication even more so. The Bolts operate in the unlicensed 5 GHz spectrum which can be use by other devices like WiFi routers, other wireless transmitting systems, etc. Here is an article that may be helpful: https://support.cs.inc/s/article/Bolt-4k-Best-Practices-for-Interference

Q: 8. If I buy the kit without a V mount plate where can I get it later if I want to? I can't find the same one they use.

A: The Wooden Camera Dual Battery Plate Cradle for Teradek Bolt LT Transmitter (V-Mount) is the respective V-Mount plate for the Teradek Bolt 6 LT HDMI 750 Wireless Receiver.

Q: 9. Does this work with Bolt 1500, Max, and the previous non 6g version?

A: The Teradek Bolt 6 LT 750 3G-SDI/HDMI Transmitter/Receiver Kit can work with older Bolt models like the Bolt 4k (750/1500/MAX). Please review the following chart to see all the supported Bolt models: https://bhpho.to/3yO7bpm.

Q: 10. How can I take antenna off?

A: The antennas on this unit are standard antennas they screw into the unit and can be taken off the same way, this unit does not come with the the antennas attached