Overloud TAF TEX is a SuperCabinet IR library that captures the sound of a 1x12" cabinet with a Texas Heat speaker. This cabinet is designed to deliver a crispy sound with plenty of detail in the mids.

The library is created with 15 microphones and 8 positions for each microphone. To operate, it requires a full installation of Overloud TH-U SuperCabinet IR processor.

Powered IRs for TH-U SuperCabinet    Crispy with Details in the Mids    1x12" Cabinet    Texas Heat Speaker    15 Microphones, 8 IRs Each    Neve 1073VR Mic Pre    SuperCabinet IR Processor Required

The library is created for the TH-U SuperCabinet:

• Graphically browse the IRs in the library
• Blend IRs together
• Craft new cabinet tones with the unique Multiband mode
• Use the IR in the software
• Export the IRs in WAV files, compatible with the software IR loaders and all the major hardware modelers

• 1x12" cab with Texas Heat speaker

• Mic Preamp: Neve 1073VR
• Pre-EQ: Yes
• HPF/LPF: Active

Every microphone has been moved to 4 different horizontal position (Cap, Cap Edge, Cone, and Cone Edge) and two distances for a total of 8 IRs each. All IRs have been phase aligned and can be blended without phase cancellation.

• AKG C414
• Audix i5
• Beyerdynamic M160
• DPA 4011
• Electrovoice RE20
• Neumann U47
• Neumann U87
• Peluso R14
• Royer 121
• Sennheiser MD421
• ShinyBox 46MXL
• Shure 545 SD
• Shure SM7B
• Shure SM57
• Sony C800G

Related Questions and Answers

Q: 1. Will this work with the AW-HE40HK?

A: Yes, this remote will work with B&H # PAAWHE40HK.

Q: 2. Will this work with the #AW-UE40KPJ?

A: Yes, the Panasonic AW-RM50AG IR Wireless Remote Control is compatible with the Panasonic 4K30 HDMI PTZ Camera with 24x Optical Zoom (Black).

Q: 3. Can I daisy chain this to lacie 2big drive?

A: Yes, the OWC Mercury Pro U.2 Dual with SoftRAID BH #OWTB3MPDU0S has dual Thunderbolt 3 ports so as long as your Lacie drive is Thunderbolt 3 or USB Type C, you can connect it to the second port on the unit.

Q: 4. Can this be plugged into a USB-C computer?

A: This will require using Tunderbolt3 port on the computer.

Q: 5. Will this work on a Peak Design Travel Tripod and Acratech GXP ball head?

A: Yes. :) The PD travel tripod and Acratech products accept arca-swiss style plates.

Q: 6. How long are the cords that come with it?

A: There are 2 x double-headed IR emitters with 10' cables included in the kit.

Q: 7. Does this paper have a texture to it?

A: Yes, the Photo Tex Aqueous Inkjet Fabric has a matte finish to its surface.

Q: 8. Will it fit to ProMediaGear GKJr Katana Pro Gimbal?

A: The RRS TH-DVTL-40 will fit on the GKJr Katana Pro Gimbal Head.

Q: 9. Can I use this controller with a WIRED IR extender/repeater to control a Panasonic AW-UE70 mounted where I do not have line-of-sight access to the sensor on the camera? In other words - does it use a non-standard wavelength or frequency transmission?

A: Regarding the frequencies - this is a better question for Panasonic and the manufacturer of the IR extender you are planning to use. Chances are that it will work. I have had excellent success with Niles IR repeaters and most every brand of remote that I have used with it (Sony, Samsung, Yamaha, Panasonic, JVC, to name a few) . For a more expensive and very reliable solution I use Universal Remote Control remotes and their MRF 350 RF base station so you don't need line of sight to an IR repeater. I have even used the supplied IR remote of various pieces of gear pointed at a mirror that aims at the equipment to go around a corner in a room and it is very reliable. The distance is a factor...RF is good for typically 50 feet, depending on the wall construction.

Q: 10. Is this backward compatible to thunderbolt 2?

A: The OWC Mercury Pro U.2 Dual requires Thunderbolt 3 as a host connection for proper operation.