Improve the acoustics of your home/project studio with the Vicoustic VicStudio Box, a budget-friendly, complete acoustic-treatment kit for rooms with floor areas up to 161 ft². The kit enables you to control 1st reflections, reverberation time, and sound-field anomalies, which may compromise the accuracy of your audio monitoring when recording, mixing, and mastering.

Consisting of one single box, the VicStudio Box offers everything required to get a treated studio that sounds great and looks even better. Included are eight Wavewood Ultra Lite panels (white-matte) for mid-frequency absorption, two Multifuser DC3 (white-matte) panels for diffusion, and two tubes of Flexi Glue Ultra to easily install it all on your walls and/or ceiling. For bigger areas, you can acquire multiple boxes to scale up the solution—either all at once or in stages.

Improve Acoustics of Your Home Studio    Budget-Friendly Package    8 Wavewood Ultra Lite (White Matte)    2 Multifuser DC3 (White Matte)    2 Tubes of Flexi Glue Ultra    For Room Floor Area Up to 161 Sq. Feet    Easy-to-Use and Install Package    Uses Glue Installation    Treat 1st Reflections and Reverberation    Correct Sound-Field Anomalies

• Affects the correct perception of the direct sound and first reflections contained in the audio being reproduced.
• Affects the stereo image by shifting or broadening it.
• Affects the proper sound-source localization.

• Affects the correct perception of the ambience and reverberation in recordings/audio tracks due to masking effects by the reverberation of the room itself and caused by late reflections traveling throughout the room.

• Comb-filter effects: affect the appropriate perception of the frequency spectrum due to cancellation of certain frequencies.
• Flutter echoes: which affect the correct monitoring of the audio signal.
• Room modes: which affect the correct perception of the sound field at lower frequencies.

Related Questions and Answers

Q: 1. is it compatible with 4x4 filters?

A: You can use 4x4 filters in the VIV with the dedicated tray B1251.1029

Q: 2. Does this kit come with the swing away part? And also does it include the extension brackt for lens height?

A: The swing aray part does have a moving part to adjust height. Honestly great and well made!

Q: 3. I want to use my Cordvision Cine Rings with this matte box. They have a 77mm thread, and 80mm outside diameter. Is there a 80mm clamp on ring for the Genustech Production Matte Box?

A: Genustech does not offer an 80mm clamp-on adapter ring for the Genustech Production Matte Box Complete Kit; however, the included 77mm step-up ring will screw onto a 77mm filter thread.

Q: 4. will this fit with a meike FF 50mm lens with a circular filter?

A: If the circular filter has a threaded adapter, then yes, the Tilta Mirage Matte Box can attach to this setup because there is an 82mm adapter ring included.

Q: 5. How many filters can the circular filter holder hold at a time?

A: The Tilta Mirage Matte Box may only hold one Tilta Circular 95mm Filter at a time but it does have an optional 4 x 5.65" stackable filter tray that would allow you to add another filter to the matte box. See: https://bhpho.to/3LCDlWg

Q: 6. is it compatible with 4x4 filters?

A: Yes, you can use 4x4 filters in the Viv if you use these 4x4 filter holders: Bright Tangerine 4x4 Filter Tray for Viv B&H # BRB12511029.

Q: 7. Would this be compatible with the GH5?

A: That depends on the lenses being used. If you are using lenses with the GH5 with an outside diameter between 52 to 114mm it will work. This kit also includes step up rings that go from 52, 58, 62, 67, 72, 77, 82 to 82mm each.

Q: 8. Do the vents on the sides of the matte box that help airflow at high speeds allow light to hit the lens at the wrong angles defeating the purpose of having a matte box?

A: The Vents should not allow a significant amount of light to enter the Tilta Mirage mattebox. If it does become an issue covering the vents with a small piece of gaffer tape would solve this issue.

Q: 9. Does the power supply for the motor need to be removed when not in use? When I leave it connected it drains the battery even when the motor is off.

A: When the Tilta Mirage Motorized VND Kit is not being used, to best maintain current battery levels the power supply should be disconnected from the motor.

Q: 10. Can the clip-on feature be mounted directly onto a Canon cine lens?

A: Canon makes several cine lenses so the answer is dependent on which one you are interested in. We can say that for the Canon CN-E prime lenses that they all have a consistent front of 114mm. This is a cine standard that is followed by many lens makers. The Genustech Production Matte Box Complete Kit B&H # GEGPMBKIT will clip right on directly.