Certified and authorized by RED DIGITAL CINEMA, the ATOM 600 SDI Wireless Video System for RED KOMODO (Gold Mount) from Vaxis enables visually lossless video transmission with less than 80 ms latency. The powerful line-of-sight signal can transmit to 600 feet while multicasting to up to four mobile devices via Wi-Fi for monitoring, using the dedicated Vaxis app.

Both transmitter and receiver feature a bright OLED display and a cooling fan that can be turned on and off to prevent undesirable noise during production. A USB Type-C connector provides connectivity for firmware updates and may also be used as a 5V/2A power output.

For RED KOMODO Camera    Includes Transmitter and Receiver    Transmits Wireless Video up to 600'    Supports up to 1080p    Multiple Device App Monitoring    Adjustable Cooling Fan    Low <80 ms Latency Transmission    OLED Display on Transmitter & Receiver

Supports 1080p wireless video up to 600'

Multicast support for transmitting video via Wi-Fi to up to four devices

The unit supports 13 optimized channels with automatic channel scanning

Pass-code protection

Scan QR code to monitor

Built-in SDI/HDMI signal converter

Audio/video sync at 100%

Related Questions and Answers

Q: 1. Regarding the overheating issues described by some: has this been fixed and does overheating occur if transmitter is turned off?

A: Yes, the Vaxis ATOM 600 KV Wireless TX/RX Kit for RED KOMODO's (V-Mount, Black) overheating issue has been addressed.

Q: 2. If the Komodo is being powered by 2-Pin AC power, can it passthrough power to the TX unit? Trying to flying this on an RS2 and wondering if I would also have to put on a v-mount on it.

A: No, the RED Komodo does not have an appropriate power output on the body, it only has an input. You would need a V mount battery, to go along with the Vaxis ATOM 600 KV Wireless TX/RX Kit for RED Komodo, in order to power the transmitter.

Q: 3. Can the USB-C port on the transmitter be used to power the unit in the event I do not wish to mount a V-mount battery to the transmitter?

A: No, The Vaxis ATOM 600 KV TX powers using a single, separately available V-mount battery that passes power through to the dual battery plate; RX powers using a USB Type-C power source or using its L-series battery plate. Only the RX will support USB-C powering.

Q: 4. what battery powers the transmitter? obviously a v mount powers the receiver but what about the transmitter

A: The transmitter accepts a np-f style type battery. Please review the following v-mount/ NPF style type batteries that we have to offer for this unit https://bhpho.to/3lJU9Ab

Q: 5. Can multiple receivers retrieve the signal from a transmitter?

A: it is compatible with any Vaxis ATOM RX unit. You can also transmit simultaneously to up to three mobile devices over WiFi, and use the Vaxis Vision app to view images.

Q: 6. Does this system transmit timecode with the video signal so you can get timecode in the SDI out on the receiver side?

A: The device supports timecode with its signal.

Q: 7. Is there any solution for powering it without a v mount battery, for use on a gimbal?

A: No, the Vaxis ATOM 600 KV Wireless TX/RX Kit for RED KOMODO (V-Mount, Black) requires a V-Mount battery for power.

Q: 8. Does it transmit Timecode as part of the SDI stream?

A: Yes, the Timecode is sent with the signal.

Q: 9. Does the Vaxis Transmitter do cross conversion from sdi to hdmi?

A: Yes, the HDMI connections on this system are outputs only. This has an SDI input that will go out to both SDI and HDMI.

Q: 10. Can you turn off the wireless signal when you don't have a need to transmit the signal and just use it to power the camera?

A: Yes, you still have battery communication from the Vaxis ATOM 600 KV Wireless TX/RX Kit for RED KOMODO (V-Mount, Black) to the RED DIGITAL CINEMA KOMODO 6K Digital Cinema Camera (Canon RF) when the transmitter is turned off.