Toa Infrared Wireless Microphone System

Williams Sound Ir Sy7 Medium-area Infrared Transmitter System With Poe (black)

Product Code: ga110929
Availability: In Stock

$4,143.00 $4,971.60

Qty

0 reviews Write a review

Description
Reviews (0)

The Williams Sound IR T2 is a two-channel, SoundPlus Series infrared transmitter designed to deliver a coverage area of up to 18,000 square feet for assistive listening and language interpretation in commercial spaces. It supports 2.3, 2.8, 3.3, and 3.8 MHz transmission frequencies with WIR RX22-4, WIR RX18, or IR R1 receivers.

Line inputs are accessible via two Euroblock connectors while a 3.5mm mini jack allows the connection of a microphone, which can be optimized using the dedicated mic gain knob and microphone channel selection switch. Additionally, a control system may be integrated via a separate Euroblock port.

LEDs are provided for indication of power status and signal presence. The power-saving mode automatically shuts off the carrier after 12 minutes without audio. The included wall/ceiling mount and international power supply enable flexible installation.

Commercial-Grade Infrared System Controlled Remotely via RS-232 Power over Ethernet (PoE) Support PoE Remote Power Kit Included On/Off Volume Control Rotary Channel Selector Foam Earpads on Headphones

Battery
Coverage Area	Up to 18,000 ft² / 1673 m² in single-channel mode with the RX22-4 receiver
Transmission Frequencies	2.3, 2.8, 3.3, and 3.8 MHz
Modulation	FM wideband
Pre-Emphasis	50 µS
Deviation	±50 kHz
Inputs	2 x Euroblock line inputs (balanced/unbalanced) 1 x 1/8" / 3.5 mm microphone input
Control	1 x Euroblock (Ground, Tx, Rx)
Frequency Response	Line Inputs: 95 Hz to 17.6 kHz, -3 dB re 1 kHz Mic Input: 125 Hz to 17 kHz, -3 dB re 1 kHz
Signal-to-Noise Ratio (SNR)	70 dB (line input)
Operating Temperature	32 to 122°F / 0 to 50°C
Indicators	Audio: Yellow LED per channel Power: Green LED
Power Requirement	DC Power Input: 2.1 mm ID barrel connector, 48 VDC, 0.2 A, center positive Power Supply Input: 100 to 240 VAC, 50/60 Hz, 18 W
Power Save Mode	Carrier shuts off after 12 minutes without audio
Dimensions	9.0 x 3.8 x 1.4" / 229 x 97 x 36 mm
Weight	0.8 lb / 0.4 kg
Approvals and Compliance	CE, FCC, Industry Canada, WEEE, RoHS, CB Scheme, RCM, and PSE
Packaging Info
Package Weight	2.84 lb
Box Dimensions (LxWxH)	11.6 x 6.8 x 4.2"

Ideal for assistive listening and language interpretation in commercial spaces such as conference rooms, assisted living facilities, small cinemas/theaters, classrooms, and courtrooms

Wall-/ceiling-mountable compact transmitter with a maximum coverage area of 18,000 ft²

50% greater coverage than the WIR TX75

Power-saving mode automatically shuts off the carrier after 12 minutes without audio

Power and audio indicators on transmitter, charging indicators on charger

3.5mm microphone input with channel selector and dedicated gain knob

Two Euroblock line inputs accept balanced or unbalanced signal

Includes international power supply with line cord

Compatible with WIR RX22-4, WIR RX18, and IR R1 receivers

Related Questions and Answers

Q: 1. Can you add receivers up to 65 receivers simultaneously?

A: The Williams Sound TGS PRO 737 Personal PA FM Tour Guide System BH #WITGSPRO737 can theoretically transmit to an unlimited amount of receivers. But there may be practical limits due to RF interference and other environmental factors.

Q: 2. the plug is a right angle 3.5?

A: The plug on the Williams Sound HED 021 Folding Mono Headphones is a right angle 3.5mm.

Q: 3. Will this clip work with the Tech Pro UHF Wireless Microphone the clip is almost the same even how the clip screws in ?

A: This clip is only compatible with the William Sounds Mic 054 or Mic 090 mini lapel microphones.

Q: 4. is there a transformer available?

A: Williams Sound TFP008 - 110VAC/12VAC Power Supply for T27, IC-1, TEL040 B&H # WITFP008

Q: 5. Can two of the transmitters be used in the same room with different languages?

A: It is a single channel system that cannot permit a second audio source.

Q: 6. can this be used in a drive up movie set up through car radio's?

A: This transmitter will not work with car radios.

Q: 7. how do I change the channels in my device, TGS pro 737?

A: The channel selection on the PPA T46 transmitter is accessed through the menu using the front panel buttons. See the following link to the manual for more information: http://bit.ly/25gFug9 The PPA R37 receiver units feature a channel seek button located in the battery compartment. Manual available at the following link: http://bit.ly/1RwlH1V

Q: 8. I see this comes with alkaline batteries. We are interested also in purchasing the CHG3512-Charger. I was wondering what batteries work with this charging station?

A: You can use any NiMH AA batteries such as these: a href= http://www.bhphotovideo.com/c/product/823940-REG/Watson_aa_nm2300_AA_NiMH_Rechargeable_Batteries.html target= _blank http://www.bhphotovideo.com/c/product/823940-REG/Watson_aa_nm2300_AA_NiMH_Rechargeable_Batteries.html/a

Q: 9. Can the receivers in this package be charged with the Williams Sound CHG3512? Would be using NIMH batteries.

A: Yes. The R37 receivers are compatible with the CHG 3512 charging system.

Q: 10. What color temperature and CRI are the bulbs?

A: This led light is not for photographic use but is a work light. It is in the day light range but much cooler. The manufacture does not list a kelvin nor a CRI rating.

There are no reviews for this product.