Upgrade your home cinema with the powerful, Atmos-ready Reference Premiere RP-6000F II 2.5-Way Floorstanding Speaker from Klipsch in an appealing walnut finish. This second-generation speaker is capable of outputting a continuous 125W of power through dual 6.5" Cerametallic cone woofers and 1" titanium LTS vented tweeter with Tractrix horn. The larger horn and 70% larger voice coils in the woofers of the RP-6000F II fill your space with a large soundstage and more accurate directivity of sound. When used in a home theater setup, you can place optional Atmos surrounds on top, cleanly wiring them into the RP-6000F II via discrete and hidden connections on the back of the speaker.

2.5-Way Speaker Design    1 x 1" Titanium LTS Vented Tweeter    2 x 6.5" Cerametallic Cone Woofers    Up to 125W Continuous Power Handling    Atmos-Ready with Hidden Connection    Bi-Wiring & Bi-Amping Capability    90 x 90° Hybrid Tractrix Horn    8-Ohm Impedance    38 Hz to 25 kHz Frequency Response    Clean & Deep Bass with Tractrix Ports

Klipsch's proprietary Tractrix geometry in the horn is specifically crafted to efficiently transfer the high frequencies of the tweeter to the listener. This second-generation Tractrix horn is larger for better directivity and a wider overall soundstage. The Tractrix horn can accomplish this level of audio fidelity and smooth frequency response by being combined with a phase plug and a compressed molded silicone face.

Part of Klipsch's Reference line, the LTS (Linear Travel Suspension) works to minimize distortion for more detailed audio reproduction.

The housing of the tweeter in this floorstanding speaker clarifies the high-frequency signal by reducing standing waves that would otherwise create unwanted harmonics.

Another signature aspect of Klipsch's Reference Premiere speakers are the Cerametallic woofers. This floorstanding speaker is equipped with a dual 6.5" woofers, and the Cerametallic construction keeps them lightweight, yet rigid, to both maximize acoustic efficiency and minimize distortion. In the second generation, voice coils are 70% larger in diameter to ensure flawless reproduction with better power handling, cone control, and linearity. The addition of aluminum shorting rings adds to the improved power handling and lower distortion, while the motor structure itself improves the transit response and adds more control with increased speed and improved accuracy.

If you prefer a deeper bass from your speakers, the integrated ports of the RP-6000F II utilize Klipsch's Tractrix geometry to produce clean and punchy low-end frequencies. The geometry allows the air to quickly and efficiently exit the speaker, which also reduces port noise. Customized inner flares further lowers noise by reducing air turbulence entering the port.

Dual input terminals on the back of the speaker allows you to bi-wire and bi-amp with additional (optional) cabling. Bi-wiring allows you to separate the high and low frequencies to each cable. By separating them, interference and distortion are minimized, delivering a clearer sound that has more accuracy in your listening environment. The bi-amping can generate more power for your speakers by using outboard crossovers with (optional) separate amplifiers.

Klipsch incorporates additional bracing and constructed a divided cabinet to help with acoustic quality. Together they minimize resonances and vibration to specifically improve transparency and clarity of the sound it produces.

The RP-6000F II features audiophile-grade wiring and easily accessible aluminum binding posts for any connection type.

Klipsch uses internally braced, furniture-grade MDF for a durable and attractive appearance. The walnut vinyl finish includes satin-painted baffles that have a scratch-resistant coating.

In addition to its sleek and modern appearance, the cast aluminum feet of the RP-6000F II provide less resonance than using wood or plastic. These feet have been designed to minimize the surface area that's in contact with the floor, providing you with the extra benefit of faster and tighter low frequencies and more audio detail.

You have the option of exposing the copper-colored woofers and tweeter or covering them up with a discrete speaker grille. The grille magnetically attaches to the front of the RP-6000F II.

Related Questions and Answers

Q: 1. Will these speakers connect to an iMac M1, 2021?

A: Yes, the Klipsch ProMedia 2.1 Speaker System can connect to Apple iMacs with M1 Chip (Mid 2021) using the speakers 1 x 1/8" / 3.5 mm Input.

Q: 2. What is the consrucction of the woofer and its surround for example, polypropylene and butyl?

A: The manufacturer has not published this specification. Here is the complete specification:Features:In-Wall / In-Ceiling System2-Way Stereo Sound Speakers6-1/2'' Midbass Speaker1'' High Temperature Voice Coil1/2 Inch Polymer Tweeter200 Watts Rated Peak Power4-8 Ohm ImpedanceFrequency Response: 70Hz - 20kHzMounts Flush on Walls or CeilingsPerfect for Custom Installations & ApplicationsIncludes Cut-Out Template for Easy InstallationCut-out Dimensions: 7 3/4''W x 11 3/8''H x 2 7/8''DOverall Dimensions: 8 3/4''W x 12 1/2''H x 2 7/8''DSold as: PairWeight: 7.02 lbs.PYLE AUDIO INC.1600 63rd.StreetBrooklyn N.Y. 11204Tel: 800-444-5671 Email support@pyleaudio.com

Q: 3. Are the HD6's magnetically shielded?

A: No. Not necessary when placed next to flat panel monitors or televisions.

Q: 4. Do the satellite speakers have tripod mounts?

A: Yes, the Klipsch ProMedia 2.1 Speaker System, (B&H # KLPROMEDIA21), satellite speakers have a 1/4-20'' tripod female thread at the bottom.

Q: 5. Description says Klipsch Promedia 2.1 is THX certified. However, one of the reviews indicated that it is no longer TXH certified. Is the product currently for sale really TXH certified? Does indicate this on the box

A: We obtain the Klipsch ProMedia 2.1 Speaker System directly from them. They are TXH certified.

Q: 6. Will these speakers work with mini Mac M2 Pro?

A: The Klipsch ProMedia 2.1 Speaker System BH #KLPROMEDIA21 will work with a Mac Mini Pro M.2.

Q: 7. where is the power switch for the leslie?

A: In back on the bottom where the speed control and everything else is.

Q: 8. Is there a power switch? I cannot one anywhere. It seems the only way to power it down is to unplug it.

A: The Klipsch ProMedia 2.1 Speaker System does not have a power switch.

Q: 9. What are the measurements, and the weight of this speaker B&H gives no specs whatsoever?

A: The dimensions and weight of the Polk Audio Signature Elite ES55 Floorstanding Speaker (Walnut, Single) are as follows: Width 8.5" (21.6 cm) Height 41.5" (105.41 cm) Depth 12.5" (31.75 cm) Weight 44 lbs (19.96 kg)

Q: 10. I'm trying to understand the difference between the first and second generation of the Klipsch RP-500SA. Searched the web and didn't see any useful information. Is there a significant difference?

A: The 2nd Gen RP comes with an updated tractrix horn and new woofers made of spun-copper thermoformed crystal polymer for the purpose of minimizing resonance. Here is a link to a Klipsch page with further details on this. https://www.klipsch.com/blog/next-generation-reference-speakers-whats-the-difference