Get better quality sound with the SR-EA5 Denoise Sound Card from Saramonic. This portable audio interface features a 3.9" connecting cable with a USB Type-C port and a USB Type-A adapter, allowing you to connect a wide range of mobile devices and computers. Analog connections include a 3.5mm connector that allows you to interface with headphones or wired earbuds with a microphone, another 3.5mm port that supports a TRS microphone connection, and yet another 3.5mm jack designed for monitoring via TRS or TRRS headphones.

The SR-EA5 gets power from the USB connection, requires no drivers, and offers simple and streamlined controls. One knob controls the volume level with a range from 0 to 20 dB, while a second knob lets you adjust the amount of noise cancelling from 0 to -45 dB. A mute button conveniently cuts off input and output audio.

Provides Clearer Audio with Less Noise    Use with Computers and Mobile Devices    3.5mm Input/Output for Earbuds with Mic    3.5mm Input for Microphone    3.5mm Headphone Output    Noise Reduction Control    Volume Control

• Adjustable audio sound
• Noise-reduction design
• One mute button
• No driver required
• Compatible with multiple devices

Related Questions and Answers

Q: 1. Is this identical with with Kopul CMX-2 Two-Channel Passive Camcorder XLR Adapter? https://a href= http://www.bhphotovideo.com/c/product/1116259-REG/kopul_cmx_2_2_channel_pasive_camcorder.html target= _blank www.bhphotovideo.com/c/product/1116259-REG/kopul_cmx_2_2_channel_pasive_camcorder.html/a

A: The Saramonic SR-AX101 is identical in features to the Kopul CMX-2 XLR adapter.

Q: 2. Can this be used with Hollyland Lark Max transmitter?

A: Yes, the Saramonic SR-MH1 Handheld Transmitter Adapter can be used with a Hollyland Lark Max transmitter.

Q: 3. The Kopul version of this had a cold shoe mount that was terrible adn would disassemble in the field when the screw fell out of the bottom from too much stress of mounting receivers on it. Does this product suffer the same problem?

A: I worked with Saramonic for 2-years and that whole time, I have not seen any defects of this product, or heard of an issue like you describe. I also have 2 in my possession for those 2-years and had no issue. My best suggestion is to try the item for yourself and if it's not up to your standards, return it for a refund or another product. We also offer a one-year warranty for full replacement if there's any problem. I think you're going to be happy with the product.

Q: 4. How would this work with the Comica Audio BoomX-D D2 being that it seperates the audio to left and right anyway?

A: If you wanted separate level control over the left and right out of the Boom XD, you would set the receiver to stereo out and plug it into the stereo input of this mixer. Then you could use the separate volume controls to adjust each level individually.

Q: 5. Would this be suitable for teaching an online movement class (without complex movements)?

A: The microphone works well. Nevertheless I found the cord to be a problem in close spaces due to tangling. I then purchased a Rode Go wireless mic from B&H. That has worked well.

Q: 6. Two questions: 1 how does this device get energy? - 2: if I connect a Sennheiser transmitter to a soundboard, I can connect the receiver to the Saramonic SR-AX101 to convert the line signal and then the Saramonic to my DSLR to get the sound?.

A: The Saramonic SR-AX101 is a passive device (no battery or power is required to function) for routing one or more audio signals to a camera. The mics you connect will need to be powered independently. The Sennheiser wireless system is self-powered, so it can be used with the SR-AX101. If you are only connecting one audio signal to the camera, you could connect the Sennheiser receiver directly to your camera. Please feel free to contact us if you would like further assistance.

Q: 7. can this unit only be powered by the internal battery?

A: The Saramonic SR-PAX1 Two-Channel Audio Mixer, Preamp, Microphone Adapter is powered by a 9V battery. It does not have an internal rechargeable battery.

Q: 8. Can I connect 3 mono inputs to mix them to the output?

A: No, this adapter can handle either two mono mics, or one stereo mic.

Q: 9. I want to be able to conduct a traditional two person interview, but have the audio recorded on separate tracks/ channels. With that being said. would this work well with the Saramonic Blink 500 B2 2-Person Digital Camera-Mount Wireless Omni Lavalier Microphone System?

A: Since the Blink 500 B2 sums the 2 mics into a dual mono mix, adding a SR-AX100 will not split it for you. You could purchase 2x Blink 500 B1 systems and the SR-AX100 and get each person on seperate tracks. You could even do that with a simple wire adapter instead of the SR-AX100, but the SR-AX100 will give you individual level control. If you already own the Blink 500 B2, you can add a Blink 500 RX to the system and get the same result. I hope that helps and isn't too confusing.

Q: 10. Can I use it to connect a mixer board to my dslr?

A: No. You would require something with line inputs instead of mic inputs like the Kopul CMX-2-V2. https://www.bhphotovideo.com/c/product/1332706-REG/kopul_cmx_2_v2_two_channel_passive_camcorder.html